Mailinglist Archive: opensuse (4053 mails)

< Previous Next >
Re: [SLE] Lan question
First of all, thanx Terence ;)
tor,thanx for the info,but my router is not propietary,its property of the
carrier , in this case BT.
And this way they doesnt give any access to the router. :(
Mmmm,after i try nload like Jaakko said i must say that doesnt make what i
want
This is the output of nload
Device: eth0
----------------
Total In: 2259.93 MB Total Out:
1195.70 MB
Current In: 8.05 kBit/s Current Out:
0.67 kBit/s
(min 4.03, avg 18.31, max 54.90) (min 0.00,
avg 64.21, max 631.36)

This info i can watch it in iptraf....and more detailed but not like i want
:(
Imagine...a network with 50 workstations...i want to know in a period of
time what machine demands more bandwith....not the total of the bandwith
demanded every time.

Thanx all for the answers

----- Original Message -----
From: "Tor Sigurdsson" <tosi@xxxxxxxxxxxxxxxxxxxx>
To: "Felipe Blanco" <iolistas@xxxxxxxxxxxxx>
Cc: <suse-linux-e@xxxxxxxx>
Sent: Wednesday, August 08, 2001 9:05 PM
Subject: Re: [SLE] Lan question


>
> Hi,
>
> As you have a cisco router, it's a pice of cake :)
>
> Here is a simulated session:
>
> user@host:~ > telnet router
> Trying 192.168.0.254...
> Connected to router.
> Escape character is '^]'.
>
>
> User Access Verification
>
> Password:
> router>ena
> Password:
> router#conf te
> Enter configuration commands, one per line. End with CNTL/Z.
> router(config)#int eth0
> router(config-if)#ip accounting output-packets
> router(config-if)#^Z <--- here I press control and Z
> router#wr mem
> router#sh ip acco
> Source Destination Packets Bytes
> 10.0.0.1 100.200.100.1 97 11762
> 10.0.0.2 200.200.100.100 50 14436
>
> Accounting data age is 2
> router#exit
>
>
> As you can see, it's simplicity itself. The "ip accounting output-packets"
> entry only has to be set once. To stop accounting, use "no ip..."
>
> To clear the accounting cache use "clear ip acco" at the "router#" prompt.
>
> -tosi
>
>
> Þann miðvikudagur 08 ágúst 2001 17:43 skrifaðir þú:
> > I have a lan with up to 50 hosts,most of them are windoze...
> > All go out through a cisco 2610 ....
> >
> > I know there is one person in my office that spend most of the time
> > downloading big files,like movies,videos and other stuff that have a lot
of
> > size..
> > When this person starts the "party" the connection gets slow and slow...
> >
> > My answer is ...is there anyway to find out what machine is "eating"
most
> > percent of bandwith ??
> >
> > The incoming traffic pass through a ethernet in a fw,so i only need a
tool
> > like iptraf or something like this...to know wich of the 50 hosts is
> > demanding more bandwith than others
> >
> > I dont know if i explain well the question,my english is not like a
native
> > , i know!
> >
> > Thanx :)
>
> --
> To unsubscribe send e-mail to suse-linux-e-unsubscribe@xxxxxxxx
> For additional commands send e-mail to suse-linux-e-help@xxxxxxxx
> Also check the FAQ at http://www.suse.com/support/faq and the
> archives at http://lists.suse.com
>


< Previous Next >
Follow Ups