October 2018 - openSUSE Commits - openSUSE Mailing Lists

commit 000product for openSUSE:Factory
by root 31 Oct '18

31 Oct '18

Hello community, here is the log from the commit of package 000product for openSUSE:Factory checked in at 2018-10-31 22:55:38 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/000product (Old) and /work/SRC/openSUSE:Factory/.000product.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "000product" Wed Oct 31 22:55:38 2018 rev:633 rq: version:unknown Changes: -------- New Changes file: NO CHANGES FILE!!! ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ _service:product_converter:openSUSE-Addon-NonOss-ftp-ftp-i586_x86_64.kiwi: same change _service:product_converter:openSUSE-Addon-NonOss-release.spec: same change ++++++ _service:product_converter:openSUSE-Tumbleweed-Kubic-dvd5-dvd-x86_64.kiwi ++++++ --- /var/tmp/diff_new_pack.wCerip/_old 2018-10-31 23:02:17.027213682 +0100 +++ /var/tmp/diff_new_pack.wCerip/_new 2018-10-31 23:02:17.027213682 +0100 @@ -882,6 +882,8 @@ <repopackage name="shared-mime-info"/> <repopackage name="shared-mime-info"/> <repopackage name="shim"/> + <repopackage name="slirp4netns"/> + <repopackage name="slirp4netns"/> <repopackage name="snapper"/> <repopackage name="socat"/> <repopackage name="socat"/> _service:product_converter:openSUSE-cd-mini-i586.kiwi: same change _service:product_converter:openSUSE-cd-mini-x86_64.kiwi: same change ++++++ _service:product_converter:openSUSE-dvd5-dvd-i586.kiwi ++++++ --- /var/tmp/diff_new_pack.wCerip/_old 2018-10-31 23:02:17.087213639 +0100 +++ /var/tmp/diff_new_pack.wCerip/_new 2018-10-31 23:02:17.087213639 +0100 @@ -480,6 +480,8 @@ <repopackage name="enchant-1-backend-voikko" arch="i586,i686"/> <repopackage name="enchant-2-backend-hunspell" arch="i586,i686"/> <repopackage name="enchant-data" arch="i586,i686"/> + <repopackage name="engrampa" arch="i586,i686"/> + <repopackage name="engrampa-lang" arch="i586,i686"/> <repopackage name="enscript" arch="i586,i686"/> <repopackage name="eog" arch="i586,i686"/> <repopackage name="eog-lang" arch="i586,i686"/> @@ -1491,6 +1493,7 @@ <repopackage name="lensfun-data" arch="i586,i686"/> <repopackage name="less" arch="i586,i686"/> <repopackage name="lftp" arch="i586,i686"/> + <repopackage name="lhasa" arch="i586,i686"/> <repopackage name="liba52-0" arch="i586,i686"/> <repopackage name="libaa1" arch="i586,i686"/> <repopackage name="libabiword-3_0" arch="i586,i686"/> @@ -2296,6 +2299,7 @@ <repopackage name="libldb1" arch="i586,i686"/> <repopackage name="libldns2" arch="i586,i686"/> <repopackage name="liblensfun1" arch="i586,i686"/> + <repopackage name="liblhasa0" arch="i586,i686"/> <repopackage name="liblibkremotecontrol1" arch="i586,i686"/> <repopackage name="liblightdm-gobject-1-0" arch="i586,i686"/> <repopackage name="liblilv-0-0" arch="i586,i686"/> @@ -2973,6 +2977,7 @@ <repopackage name="libX11-xcb1" arch="i586,i686"/> <repopackage name="libx86emu2" arch="i586,i686"/> <repopackage name="libxapian30" arch="i586,i686"/> + <repopackage name="libxapp1" arch="i586,i686"/> <repopackage name="libxatracker2" arch="i586,i686"/> <repopackage name="libXau-devel" arch="i586,i686"/> <repopackage name="libXau6" arch="i586,i686"/> @@ -3059,6 +3064,8 @@ <repopackage name="libXprintUtil-devel" arch="i586,i686"/> <repopackage name="libXprintUtil1" arch="i586,i686"/> <repopackage name="libXrandr2" arch="i586,i686"/> + <repopackage name="libxreaderdocument3" arch="i586,i686"/> + <repopackage name="libxreaderview3" arch="i586,i686"/> <repopackage name="libXrender-devel" arch="i586,i686"/> <repopackage name="libXrender1" arch="i586,i686"/> <repopackage name="libXRes1" arch="i586,i686"/> @@ -3195,6 +3202,7 @@ <repopackage name="meld-lang" arch="i586,i686"/> <repopackage name="memtest86+" arch="i586,i686"/> <repopackage name="menu-cache" arch="i586,i686"/> + <repopackage name="menulibre" arch="i586,i686"/> <repopackage name="mercurial" arch="i586,i686"/> <repopackage name="mercurial-lang" arch="i586,i686"/> <repopackage name="Mesa" arch="i586,i686"/> @@ -3238,6 +3246,8 @@ <repopackage name="ModemManager-lang" arch="i586,i686"/> <repopackage name="monapo-fonts" arch="i586,i686"/> <repopackage name="mosh" arch="i586,i686"/> + <repopackage name="mousepad" arch="i586,i686"/> + <repopackage name="mousepad-lang" arch="i586,i686"/> <repopackage name="mousetweaks" arch="i586,i686"/> <repopackage name="mousetweaks-lang" arch="i586,i686"/> <repopackage name="mozc" arch="i586,i686"/> @@ -3469,6 +3479,8 @@ <repopackage name="parcellite" arch="i586,i686"/> <repopackage name="parley" arch="i586,i686"/> <repopackage name="parley-lang" arch="i586,i686"/> + <repopackage name="parole" arch="i586,i686"/> + <repopackage name="parole-lang" arch="i586,i686"/> <repopackage name="parted" arch="i586,i686"/> <repopackage name="parted-lang" arch="i586,i686"/> <repopackage name="patch" arch="i586,i686"/> @@ -4176,6 +4188,7 @@ <repopackage name="python3-Pillow" arch="i586,i686"/> <repopackage name="python3-pip" arch="i586,i686"/> <repopackage name="python3-ply" arch="i586,i686"/> + <repopackage name="python3-psutil" arch="i586,i686"/> <repopackage name="python3-py" arch="i586,i686"/> <repopackage name="python3-pyasn1" arch="i586,i686"/> <repopackage name="python3-pycparser" arch="i586,i686"/> @@ -5036,6 +5049,7 @@ <repopackage name="x11-tools" arch="i586,i686"/> <repopackage name="xalan-j2" arch="i586,i686"/> <repopackage name="xano-mincho-fonts" arch="i586,i686"/> + <repopackage name="xapps-common" arch="i586,i686"/> <repopackage name="xauth" arch="i586,i686"/> <repopackage name="xawtv" arch="i586,i686"/> <repopackage name="xbitmaps" arch="i586,i686"/> @@ -5241,6 +5255,9 @@ <repopackage name="xprop" arch="i586,i686"/> <repopackage name="xrandr" arch="i586,i686"/> <repopackage name="xrdb" arch="i586,i686"/> + <repopackage name="xreader" arch="i586,i686"/> + <repopackage name="xreader-backends" arch="i586,i686"/> + <repopackage name="xreader-lang" arch="i586,i686"/> <repopackage name="xsane" arch="i586,i686"/> <repopackage name="xscreensaver" arch="i586,i686"/> <repopackage name="xscreensaver-data" arch="i586,i686"/> ++++++ _service:product_converter:openSUSE-dvd5-dvd-x86_64.kiwi ++++++ --- /var/tmp/diff_new_pack.wCerip/_old 2018-10-31 23:02:17.107213624 +0100 +++ /var/tmp/diff_new_pack.wCerip/_new 2018-10-31 23:02:17.107213624 +0100 @@ -493,6 +493,8 @@ <repopackage name="enchant-1-backend-voikko" arch="x86_64"/> <repopackage name="enchant-2-backend-hunspell" arch="x86_64"/> <repopackage name="enchant-data" arch="x86_64"/> + <repopackage name="engrampa" arch="x86_64"/> + <repopackage name="engrampa-lang" arch="x86_64"/> <repopackage name="enscript" arch="x86_64"/> <repopackage name="eog" arch="x86_64"/> <repopackage name="eog-lang" arch="x86_64"/> @@ -1513,6 +1515,7 @@ <repopackage name="lensfun-data" arch="x86_64"/> <repopackage name="less" arch="x86_64"/> <repopackage name="lftp" arch="x86_64"/> + <repopackage name="lhasa" arch="x86_64"/> <repopackage name="liba52-0" arch="x86_64"/> <repopackage name="libaa1" arch="x86_64"/> <repopackage name="libabiword-3_0" arch="x86_64"/> @@ -2383,6 +2386,7 @@ <repopackage name="libldm-1_0-0" arch="x86_64"/> <repopackage name="libldns2" arch="x86_64"/> <repopackage name="liblensfun1" arch="x86_64"/> + <repopackage name="liblhasa0" arch="x86_64"/> <repopackage name="liblibkremotecontrol1" arch="x86_64"/> <repopackage name="liblightdm-gobject-1-0" arch="x86_64"/> <repopackage name="liblilv-0-0" arch="x86_64"/> @@ -3130,6 +3134,7 @@ <repopackage name="libX11-xcb1" arch="x86_64"/> <repopackage name="libx86emu2" arch="x86_64"/> <repopackage name="libxapian30" arch="x86_64"/> + <repopackage name="libxapp1" arch="x86_64"/> <repopackage name="libxatracker2" arch="x86_64"/> <repopackage name="libXau-devel" arch="x86_64"/> <repopackage name="libXau6" arch="x86_64"/> @@ -3230,6 +3235,8 @@ <repopackage name="libXprintUtil1" arch="x86_64"/> <repopackage name="libXrandr2" arch="x86_64"/> <repopackage name="libXrandr2-32bit" arch="x86_64"/> + <repopackage name="libxreaderdocument3" arch="x86_64"/> + <repopackage name="libxreaderview3" arch="x86_64"/> <repopackage name="libXrender-devel" arch="x86_64"/> <repopackage name="libXrender1" arch="x86_64"/> <repopackage name="libXrender1-32bit" arch="x86_64"/> @@ -3370,6 +3377,7 @@ <repopackage name="meld-lang" arch="x86_64"/> <repopackage name="memtest86+" arch="x86_64"/> <repopackage name="menu-cache" arch="x86_64"/> + <repopackage name="menulibre" arch="x86_64"/> <repopackage name="mercurial" arch="x86_64"/> <repopackage name="mercurial-lang" arch="x86_64"/> <repopackage name="Mesa" arch="x86_64"/> @@ -3413,6 +3421,8 @@ <repopackage name="mokutil" arch="x86_64"/> <repopackage name="monapo-fonts" arch="x86_64"/> <repopackage name="mosh" arch="x86_64"/> + <repopackage name="mousepad" arch="x86_64"/> + <repopackage name="mousepad-lang" arch="x86_64"/> <repopackage name="mousetweaks" arch="x86_64"/> <repopackage name="mousetweaks-lang" arch="x86_64"/> <repopackage name="mozc" arch="x86_64"/> @@ -3654,6 +3664,8 @@ <repopackage name="parcellite" arch="x86_64"/> <repopackage name="parley" arch="x86_64"/> <repopackage name="parley-lang" arch="x86_64"/> + <repopackage name="parole" arch="x86_64"/> + <repopackage name="parole-lang" arch="x86_64"/> <repopackage name="parted" arch="x86_64"/> <repopackage name="parted-lang" arch="x86_64"/> <repopackage name="patch" arch="x86_64"/> @@ -4362,6 +4374,7 @@ <repopackage name="python3-Pillow" arch="x86_64"/> <repopackage name="python3-pip" arch="x86_64"/> <repopackage name="python3-ply" arch="x86_64"/> + <repopackage name="python3-psutil" arch="x86_64"/> <repopackage name="python3-py" arch="x86_64"/> <repopackage name="python3-pyasn1" arch="x86_64"/> <repopackage name="python3-pycparser" arch="x86_64"/> @@ -5236,6 +5249,7 @@ <repopackage name="x11-tools" arch="x86_64"/> <repopackage name="xalan-j2" arch="x86_64"/> <repopackage name="xano-mincho-fonts" arch="x86_64"/> + <repopackage name="xapps-common" arch="x86_64"/> <repopackage name="xauth" arch="x86_64"/> <repopackage name="xawtv" arch="x86_64"/> <repopackage name="xbitmaps" arch="x86_64"/> @@ -5443,6 +5457,9 @@ <repopackage name="xprop" arch="x86_64"/> <repopackage name="xrandr" arch="x86_64"/> <repopackage name="xrdb" arch="x86_64"/> + <repopackage name="xreader" arch="x86_64"/> + <repopackage name="xreader-backends" arch="x86_64"/> + <repopackage name="xreader-lang" arch="x86_64"/> <repopackage name="xsane" arch="x86_64"/> <repopackage name="xscreensaver" arch="x86_64"/> <repopackage name="xscreensaver-data" arch="x86_64"/> _service:product_converter:openSUSE-release.spec: same change openSUSE-Tumbleweed-Kubic-release.spec: same change openSUSE-release.spec: same change ++++++ DVD5-i586.group ++++++ --- /var/tmp/diff_new_pack.wCerip/_old 2018-10-31 23:02:17.247213522 +0100 +++ /var/tmp/diff_new_pack.wCerip/_new 2018-10-31 23:02:17.251213520 +0100 @@ -481,6 +481,8 @@ <package name="enchant-1-backend-voikko"/> <package name="enchant-2-backend-hunspell"/> <package name="enchant-data"/> + <package name="engrampa"/> + <package name="engrampa-lang"/> <package name="enscript"/> <package name="eog"/> <package name="eog-lang"/> @@ -1482,6 +1484,7 @@ <package name="lensfun-data"/> <package name="less"/> <package name="lftp"/> + <package name="lhasa"/> <package name="libAnalitza5"/> <package name="libAppStreamQt2"/> <package name="libFLAC++6"/> @@ -2390,6 +2393,7 @@ <package name="libldb1"/> <package name="libldns2"/> <package name="liblensfun1"/> + <package name="liblhasa0"/> <package name="liblibkremotecontrol1"/> <package name="liblightdm-gobject-1-0"/> <package name="liblilv-0-0"/> @@ -3006,6 +3010,7 @@ <package name="libwx_gtk2u_xrc-suse3_0_4"/> <package name="libx86emu2"/> <package name="libxapian30"/> + <package name="libxapp1"/> <package name="libxatracker2"/> <package name="libxcb-composite0"/> <package name="libxcb-cursor0"/> @@ -3063,6 +3068,8 @@ <package name="libxmlsec1-openssl1"/> <package name="libxmmsclient-glib1"/> <package name="libxmmsclient6"/> + <package name="libxreaderdocument3"/> + <package name="libxreaderview3"/> <package name="libxshmfence1"/> <package name="libxslt-tools"/> <package name="libxslt1"/> @@ -3186,6 +3193,7 @@ <package name="meld-lang"/> <package name="memtest86+"/> <package name="menu-cache"/> + <package name="menulibre"/> <package name="mercurial"/> <package name="mercurial-lang"/> <package name="messagelib"/> @@ -3216,6 +3224,8 @@ <package name="mobipocket"/> <package name="monapo-fonts"/> <package name="mosh"/> + <package name="mousepad"/> + <package name="mousepad-lang"/> <package name="mousetweaks"/> <package name="mousetweaks-lang"/> <package name="mozc"/> @@ -3414,6 +3424,8 @@ <package name="parcellite"/> <package name="parley"/> <package name="parley-lang"/> + <package name="parole"/> + <package name="parole-lang"/> <package name="parted"/> <package name="parted-lang"/> <package name="patch"/> @@ -4123,6 +4135,7 @@ <package name="python3-parso"/> <package name="python3-pip"/> <package name="python3-ply"/> + <package name="python3-psutil"/> <package name="python3-py"/> <package name="python3-pyOpenSSL"/> <package name="python3-pyasn1"/> @@ -4977,6 +4990,7 @@ <package name="x11-tools"/> <package name="xalan-j2"/> <package name="xano-mincho-fonts"/> + <package name="xapps-common"/> <package name="xauth"/> <package name="xawtv"/> <package name="xbitmaps"/> @@ -5182,6 +5196,9 @@ <package name="xprop"/> <package name="xrandr"/> <package name="xrdb"/> + <package name="xreader"/> + <package name="xreader-backends"/> + <package name="xreader-lang"/> <package name="xsane"/> <package name="xscreensaver"/> <package name="xscreensaver-data"/> ++++++ DVD5-x86_64.group ++++++ --- /var/tmp/diff_new_pack.wCerip/_old 2018-10-31 23:02:17.267213508 +0100 +++ /var/tmp/diff_new_pack.wCerip/_new 2018-10-31 23:02:17.267213508 +0100 @@ -491,6 +491,8 @@ <package name="enchant-1-backend-voikko"/> <package name="enchant-2-backend-hunspell"/> <package name="enchant-data"/> + <package name="engrampa"/> + <package name="engrampa-lang"/> <package name="enscript"/> <package name="eog"/> <package name="eog-lang"/> @@ -1506,6 +1508,7 @@ <package name="lensfun-data"/> <package name="less"/> <package name="lftp"/> + <package name="lhasa"/> <package name="libAnalitza5"/> <package name="libAppStreamQt2"/> <package name="libFLAC++6"/> @@ -2494,6 +2497,7 @@ <package name="libldm-1_0-0"/> <package name="libldns2"/> <package name="liblensfun1"/> + <package name="liblhasa0"/> <package name="liblibkremotecontrol1"/> <package name="liblightdm-gobject-1-0"/> <package name="liblilv-0-0"/> @@ -3178,6 +3182,7 @@ <package name="libwx_gtk2u_xrc-suse3_0_4"/> <package name="libx86emu2"/> <package name="libxapian30"/> + <package name="libxapp1"/> <package name="libxatracker2"/> <package name="libxcb-composite0"/> <package name="libxcb-cursor0"/> @@ -3239,6 +3244,8 @@ <package name="libxmlsec1-openssl1"/> <package name="libxmmsclient-glib1"/> <package name="libxmmsclient6"/> + <package name="libxreaderdocument3"/> + <package name="libxreaderview3"/> <package name="libxshmfence1"/> <package name="libxslt-tools"/> <package name="libxslt1"/> @@ -3363,6 +3370,7 @@ <package name="meld-lang"/> <package name="memtest86+"/> <package name="menu-cache"/> + <package name="menulibre"/> <package name="mercurial"/> <package name="mercurial-lang"/> <package name="messagelib"/> @@ -3393,6 +3401,8 @@ <package name="mokutil"/> <package name="monapo-fonts"/> <package name="mosh"/> + <package name="mousepad"/> + <package name="mousepad-lang"/> <package name="mousetweaks"/> <package name="mousetweaks-lang"/> <package name="mozc"/> @@ -3601,6 +3611,8 @@ <package name="parcellite"/> <package name="parley"/> <package name="parley-lang"/> + <package name="parole"/> + <package name="parole-lang"/> <package name="parted"/> <package name="parted-lang"/> <package name="patch"/> @@ -4311,6 +4323,7 @@ <package name="python3-passlib"/> <package name="python3-pip"/> <package name="python3-ply"/> + <package name="python3-psutil"/> <package name="python3-py"/> <package name="python3-pyOpenSSL"/> <package name="python3-pyasn1"/> @@ -5179,6 +5192,7 @@ <package name="x11-tools"/> <package name="xalan-j2"/> <package name="xano-mincho-fonts"/> + <package name="xapps-common"/> <package name="xauth"/> <package name="xawtv"/> <package name="xbitmaps"/> @@ -5386,6 +5400,9 @@ <package name="xprop"/> <package name="xrandr"/> <package name="xrdb"/> + <package name="xreader"/> + <package name="xreader-backends"/> + <package name="xreader-lang"/> <package name="xsane"/> <package name="xscreensaver"/> <package name="xscreensaver-data"/> ++++++ openSUSE-Kubic-3.group ++++++ --- /var/tmp/diff_new_pack.wCerip/_old 2018-10-31 23:02:17.475213357 +0100 +++ /var/tmp/diff_new_pack.wCerip/_new 2018-10-31 23:02:17.479213355 +0100 @@ -218,6 +218,7 @@ <package name="sed"/> <package name="shadow"/> <package name="shared-mime-info"/> + <package name="slirp4netns"/> <package name="socat"/> <package name="sssd"/> <package name="sssd-krb5-common"/> ++++++ openSUSE-Kubic-DVD.group ++++++ --- /var/tmp/diff_new_pack.wCerip/_old 2018-10-31 23:02:17.491213345 +0100 +++ /var/tmp/diff_new_pack.wCerip/_new 2018-10-31 23:02:17.495213343 +0100 @@ -240,6 +240,7 @@ <package name="sed"/> <package name="shadow"/> <package name="shared-mime-info"/> + <package name="slirp4netns"/> <package name="socat"/> <package name="sssd"/> <package name="sssd-krb5-common"/>

1 0

commit 000product for openSUSE:Factory
by root 31 Oct '18

31 Oct '18

Hello community, here is the log from the commit of package 000product for openSUSE:Factory checked in at 2018-10-31 13:21:59 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/000product (Old) and /work/SRC/openSUSE:Factory/.000product.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "000product" Wed Oct 31 13:21:59 2018 rev:632 rq: version:unknown Wed Oct 31 13:21:57 2018 rev:631 rq: version:unknown Changes: -------- New Changes file: NO CHANGES FILE!!! ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ _service:product_converter:openSUSE-Addon-NonOss-ftp-ftp-i586_x86_64.kiwi: same change _service:product_converter:openSUSE-Addon-NonOss-release.spec: same change ++++++ _service:product_converter:openSUSE-Tumbleweed-Kubic-dvd5-dvd-x86_64.kiwi ++++++ --- /var/tmp/diff_new_pack.3dmEY5/_old 2018-10-31 13:22:22.479005134 +0100 +++ /var/tmp/diff_new_pack.3dmEY5/_new 2018-10-31 13:22:22.479005134 +0100 @@ -1,4 +1,4 @@ -<image name="OBS__openSUSE-Tumbleweed-Kubic___20181029" schemaversion="4.1"> +<image name="OBS__openSUSE-Tumbleweed-Kubic___20181031" schemaversion="4.1"> <description type="system"> <author>The SUSE Team</author> <contact>build(a)opensuse.org</contact> @@ -35,9 +35,9 @@ <productvar name="SEPARATE_MEDIA">true</productvar> <productvar name="SHA1OPT">-x -2</productvar> <productvar name="VENDOR">openSUSE</productvar> - <productvar name="VERSION">20181029</productvar> + <productvar name="VERSION">20181031</productvar> <productinfo name="CONTENTSTYLE">11</productinfo> - <productinfo name="DISTRO">cpe:/o:opensuse:opensuse-tumbleweed-kubic:20181029,openSUSE Tumbleweed Kubic</productinfo> + <productinfo name="DISTRO">cpe:/o:opensuse:opensuse-tumbleweed-kubic:20181031,openSUSE Tumbleweed Kubic</productinfo> <productinfo name="LINGUAS">en_US </productinfo> <productinfo name="VENDOR">openSUSE</productinfo> <productoption name="INI_DIR">/usr/share/kiwi/modules/plugins/suse-tumbleweed</productoption> ++++++ _service:product_converter:openSUSE-Tumbleweed-Kubic-release.spec ++++++ --- /var/tmp/diff_new_pack.3dmEY5/_old 2018-10-31 13:22:22.491005123 +0100 +++ /var/tmp/diff_new_pack.3dmEY5/_new 2018-10-31 13:22:22.495005119 +0100 @@ -17,7 +17,7 @@ Name: openSUSE-Tumbleweed-Kubic-release -Version: 20181029 +Version: 20181031 Release: 0 Summary: openSUSE Tumbleweed Kubic License: GPL-2.0-or-later @@ -38,9 +38,9 @@ ExclusiveArch: %ix86 x86_64 ppc64le s390x aarch64 Provides: %name-%version Provides: product() = openSUSE-Tumbleweed-Kubic -Provides: product(openSUSE-Tumbleweed-Kubic) = 20181029-0 +Provides: product(openSUSE-Tumbleweed-Kubic) = 20181031-0 Provides: product-label() = openSUSE%20Tumbleweed%20Kubic -Provides: product-cpeid() = cpe%3A%2Fo%3Aopensuse%3Aopensuse%2Dtumbleweed%2Dkubic%3A20181029 +Provides: product-cpeid() = cpe%3A%2Fo%3Aopensuse%3Aopensuse%2Dtumbleweed%2Dkubic%3A20181031 Provides: product-url(releasenotes) = http%3A%2F%2Fdoc.opensuse.org%2Frelease%2Dnotes%2Fx86_64%2FopenSUSE%2FTumbleweed%2Frelease%2Dnotes%2DopenSUSE.rpm Provides: product-endoflife() Requires: product_flavor(openSUSE-Tumbleweed-Kubic) @@ -61,7 +61,7 @@ Group: System/Fhs Provides: product_flavor() Provides: flavor(dvd) -Provides: product_flavor(openSUSE-Tumbleweed-Kubic) = 20181029-0 +Provides: product_flavor(openSUSE-Tumbleweed-Kubic) = 20181031-0 Summary: openSUSE Tumbleweed Kubic %description dvd @@ -123,11 +123,11 @@ <product schemeversion="0"> <vendor>openSUSE</vendor> <name>openSUSE-Tumbleweed-Kubic</name> - <version>20181029</version> + <version>20181031</version> <release>0</release> <endoflife></endoflife> <arch>%{_target_cpu}</arch> - <cpeid>cpe:/o:opensuse:opensuse-tumbleweed-kubic:20181029</cpeid> + <cpeid>cpe:/o:opensuse:opensuse-tumbleweed-kubic:20181031</cpeid> <productline>openSUSE-Tumbleweed-Kubic</productline> <register> <pool> ++++++ _service:product_converter:openSUSE-cd-mini-i586.kiwi ++++++ --- /var/tmp/diff_new_pack.3dmEY5/_old 2018-10-31 13:22:22.515005101 +0100 +++ /var/tmp/diff_new_pack.3dmEY5/_new 2018-10-31 13:22:22.519005097 +0100 @@ -1,4 +1,4 @@ -<image name="OBS__openSUSE___20181029" schemaversion="4.1"> +<image name="OBS__openSUSE___20181031" schemaversion="4.1"> <description type="system"> <author>The SUSE Team</author> <contact>build(a)opensuse.org</contact> @@ -32,9 +32,9 @@ <productvar name="SEPARATE_MEDIA">true</productvar> <productvar name="SHA1OPT">-x -2</productvar> <productvar name="VENDOR">openSUSE</productvar> - <productvar name="VERSION">20181029</productvar> + <productvar name="VERSION">20181031</productvar> <productinfo name="CONTENTSTYLE">11</productinfo> - <productinfo name="DISTRO">cpe:/o:opensuse:opensuse:20181029,openSUSE Tumbleweed</productinfo> + <productinfo name="DISTRO">cpe:/o:opensuse:opensuse:20181031,openSUSE Tumbleweed</productinfo> <productinfo name="LINGUAS">cs da de en en_GB en_US es fi fr hu it ja nb nl pl pt pt_BR ru sv zh zh_CN zh_TW </productinfo> <productinfo name="VENDOR">openSUSE</productinfo> <productoption name="INI_DIR">/usr/share/kiwi/modules/plugins/suse-tumbleweed</productoption> _service:product_converter:openSUSE-cd-mini-x86_64.kiwi: same change _service:product_converter:openSUSE-dvd5-dvd-i586.kiwi: same change _service:product_converter:openSUSE-dvd5-dvd-x86_64.kiwi: same change ++++++ _service:product_converter:openSUSE-ftp-ftp-i586_x86_64.kiwi ++++++ --- /var/tmp/diff_new_pack.3dmEY5/_old 2018-10-31 13:22:22.595005026 +0100 +++ /var/tmp/diff_new_pack.3dmEY5/_new 2018-10-31 13:22:22.595005026 +0100 @@ -1,4 +1,4 @@ -<image name="OBS__openSUSE___20181029" schemaversion="4.1"> +<image name="OBS__openSUSE___20181031" schemaversion="4.1"> <description type="system"> <author>The SUSE Team</author> <contact>build(a)opensuse.org</contact> @@ -24,7 +24,7 @@ <productvar name="DISTNAME">openSUSE</productvar> <productvar name="FLAVOR">ftp</productvar> <productvar name="MAKE_LISTINGS">true</productvar> - <productvar name="MEDIUM_NAME">openSUSE-20181029-i586-x86_64</productvar> + <productvar name="MEDIUM_NAME">openSUSE-20181031-i586-x86_64</productvar> <productvar name="MULTIPLE_MEDIA">true</productvar> <productvar name="PRODUCT_DIR">/</productvar> <productvar name="PRODUCT_NAME">$DISTNAME-$FLAVOR</productvar> @@ -36,9 +36,9 @@ <productvar name="SEPARATE_MEDIA">true</productvar> <productvar name="SHA1OPT">-x -2</productvar> <productvar name="VENDOR">openSUSE</productvar> - <productvar name="VERSION">20181029</productvar> + <productvar name="VERSION">20181031</productvar> <productinfo name="CONTENTSTYLE">11</productinfo> - <productinfo name="DISTRO">cpe:/o:opensuse:opensuse:20181029,openSUSE Tumbleweed</productinfo> + <productinfo name="DISTRO">cpe:/o:opensuse:opensuse:20181031,openSUSE Tumbleweed</productinfo> <productinfo name="LINGUAS">cs da de en en_GB en_US es fi fr hu it ja nb nl pl pt pt_BR ru sv zh zh_CN zh_TW </productinfo> <productinfo name="VENDOR">openSUSE</productinfo> <productoption name="DEBUGMEDIUM">2</productoption> ++++++ _service:product_converter:openSUSE-release.spec ++++++ --- /var/tmp/diff_new_pack.3dmEY5/_old 2018-10-31 13:22:22.627004997 +0100 +++ /var/tmp/diff_new_pack.3dmEY5/_new 2018-10-31 13:22:22.647004978 +0100 @@ -20,7 +20,7 @@ #define betaversion %{nil} %define codename Tumbleweed Name: openSUSE-release -Version: 20181029 +Version: 20181031 Release: 0 # 0 is the product release, not the build release of this package Summary: openSUSE Tumbleweed @@ -51,7 +51,7 @@ Obsoletes: aaa_version Obsoletes: openSUSE-Promo-release <= 11.1 Obsoletes: openSUSE-release-live <= 11.0 -Obsoletes: product_flavor(%{product}) < 20181029 +Obsoletes: product_flavor(%{product}) < 20181031 # bnc#826592 Provides: weakremover(kernel-default) < 3.11 Provides: weakremover(kernel-desktop) < 4.2 @@ -61,7 +61,7 @@ Provides: weakremover(kernel-xen) < 3.11 Provides: %name-%version Provides: product() = openSUSE -Provides: product(openSUSE) = 20181029-0 +Provides: product(openSUSE) = 20181031-0 %ifarch x86_64 Provides: product-register-target() = openSUSE%2DTumbleweed%2Dx86_64 %endif @@ -75,7 +75,7 @@ Provides: product-register-target() = openSUSE%2DTumbleweed%2Daarch64 %endif Provides: product-label() = openSUSE -Provides: product-cpeid() = cpe%3A%2Fo%3Aopensuse%3Aopensuse%3A20181029 +Provides: product-cpeid() = cpe%3A%2Fo%3Aopensuse%3Aopensuse%3A20181031 Provides: product-url(releasenotes) = http%3A%2F%2Fdoc.opensuse.org%2Frelease%2Dnotes%2Fx86_64%2FopenSUSE%2FTumbleweed%2Frelease%2Dnotes%2DopenSUSE.rpm Provides: product-url(repository) = http%3A%2F%2Fdownload.opensuse.org%2Ftumbleweed%2Frepo%2Foss%2F Requires: product_flavor(openSUSE) @@ -17488,7 +17488,7 @@ Group: System/Fhs Provides: product_flavor() Provides: flavor(ftp) -Provides: product_flavor(openSUSE) = 20181029-0 +Provides: product_flavor(openSUSE) = 20181031-0 Summary: openSUSE Tumbleweed %description ftp @@ -17503,7 +17503,7 @@ Group: System/Fhs Provides: product_flavor() Provides: flavor(mini) -Provides: product_flavor(openSUSE) = 20181029-0 +Provides: product_flavor(openSUSE) = 20181031-0 Summary: openSUSE Tumbleweed %description mini @@ -17518,7 +17518,7 @@ Group: System/Fhs Provides: product_flavor() Provides: flavor(dvd) -Provides: product_flavor(openSUSE) = 20181029-0 +Provides: product_flavor(openSUSE) = 20181031-0 Summary: openSUSE Tumbleweed %description dvd @@ -17533,7 +17533,7 @@ Group: System/Fhs Provides: product_flavor() Provides: flavor(livecd-kde) -Provides: product_flavor(openSUSE) = 20181029-0 +Provides: product_flavor(openSUSE) = 20181031-0 Summary: openSUSE Tumbleweed %description livecd-kde @@ -17548,7 +17548,7 @@ Group: System/Fhs Provides: product_flavor() Provides: flavor(livecd-x11) -Provides: product_flavor(openSUSE) = 20181029-0 +Provides: product_flavor(openSUSE) = 20181031-0 Summary: openSUSE Tumbleweed %description livecd-x11 @@ -17563,7 +17563,7 @@ Group: System/Fhs Provides: product_flavor() Provides: flavor(livecd-gnome) -Provides: product_flavor(openSUSE) = 20181029-0 +Provides: product_flavor(openSUSE) = 20181031-0 Summary: openSUSE Tumbleweed %description livecd-gnome @@ -17578,7 +17578,7 @@ Group: System/Fhs Provides: product_flavor() Provides: flavor(usb-kde) -Provides: product_flavor(openSUSE) = 20181029-0 +Provides: product_flavor(openSUSE) = 20181031-0 Summary: openSUSE Tumbleweed %description usb-kde @@ -17593,7 +17593,7 @@ Group: System/Fhs Provides: product_flavor() Provides: flavor(usb-gnome) -Provides: product_flavor(openSUSE) = 20181029-0 +Provides: product_flavor(openSUSE) = 20181031-0 Summary: openSUSE Tumbleweed %description usb-gnome @@ -17608,7 +17608,7 @@ Group: System/Fhs Provides: product_flavor() Provides: flavor(usb-x11) -Provides: product_flavor(openSUSE) = 20181029-0 +Provides: product_flavor(openSUSE) = 20181031-0 Summary: openSUSE Tumbleweed %description usb-x11 @@ -17681,10 +17681,10 @@ <product schemeversion="0"> <vendor>openSUSE</vendor> <name>openSUSE</name> - <version>20181029</version> + <version>20181031</version> <release>0</release> <arch>%{_target_cpu}</arch> - <cpeid>cpe:/o:opensuse:opensuse:20181029</cpeid> + <cpeid>cpe:/o:opensuse:opensuse:20181031</cpeid> <productline>openSUSE</productline> <register> <pool> openSUSE-release.spec: same change ++++++ openSUSE-Tumbleweed-Kubic.product ++++++ --- /var/tmp/diff_new_pack.3dmEY5/_old 2018-10-31 13:22:22.927004718 +0100 +++ /var/tmp/diff_new_pack.3dmEY5/_new 2018-10-31 13:22:22.927004718 +0100 @@ -6,7 +6,7 @@ <name>openSUSE-Tumbleweed-Kubic</name> <releasepkgname>openSUSE-Tumbleweed-Kubic-release</releasepkgname> <endoflife/> - <version>20181029</version> + <version>20181031</version>  <release>0</release> <productline>openSUSE-Tumbleweed-Kubic</productline> ++++++ openSUSE.product ++++++ --- /var/tmp/diff_new_pack.3dmEY5/_old 2018-10-31 13:22:22.939004706 +0100 +++ /var/tmp/diff_new_pack.3dmEY5/_new 2018-10-31 13:22:22.939004706 +0100 @@ -4,7 +4,7 @@ <product> <vendor>openSUSE</vendor> <name>openSUSE</name> - <version>20181029</version> + <version>20181031</version> <release>0</release> <productline>openSUSE</productline>

1 0

commit digikam for openSUSE:Factory
by root 31 Oct '18

31 Oct '18

Hello community, here is the log from the commit of package digikam for openSUSE:Factory checked in at 2018-10-31 13:21:55 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/digikam (Old) and /work/SRC/openSUSE:Factory/.digikam.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "digikam" Wed Oct 31 13:21:55 2018 rev:174 rq:645711 version:5.9.0 Changes: -------- --- /work/SRC/openSUSE:Factory/digikam/digikam.changes 2018-10-18 15:40:11.334034335 +0200 +++ /work/SRC/openSUSE:Factory/.digikam.new/digikam.changes 2018-10-31 13:22:15.847011302 +0100 @@ -1,0 +2,11 @@ +Tue Oct 30 13:17:52 UTC 2018 - wbauer(a)tmo.at + +- Add Lower-minimum-exiv2-version.patch to make it build on Leap + 42.3 +- Remove some build requirements that are not used anymore since a + long time +- Remove unnecessary ENABLE_OPENCV3 and ENABLE_MYSQLSUPPORT cmake + options, they are ON by default since 5.7.0 +- Remove obsolete ENABLE_LCMS2 option, LCMS2 is mandatory since 5.0 + +------------------------------------------------------------------- New: ---- Lower-minimum-exiv2-version.patch ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ digikam.spec ++++++ --- /var/tmp/diff_new_pack.QlNSG3/_old 2018-10-31 13:22:18.315009007 +0100 +++ /var/tmp/diff_new_pack.QlNSG3/_new 2018-10-31 13:22:18.319009003 +0100 @@ -30,12 +30,13 @@ Patch1: 0001-Revert-replace-obsolete-qSort-function.patch # PATCH-FIX-OPENSUSE Patch2: 0002-Revert-replace-obsolete-qSort-function.patch +# PATCH-FIX-OPENSUSE +Patch3: Lower-minimum-exiv2-version.patch #This pulls in QWebEngine, which is not available on ppc64 %ifarch %ix86 x86_64 %arm aarch64 mips mips64 BuildRequires: akonadi-contact-devel %endif -BuildRequires: QtAV-devel >= 1.11 -BuildRequires: baloo5-devel +BuildRequires: QtAV-devel >= 1.12 BuildRequires: bison BuildRequires: boost-devel BuildRequires: doxygen @@ -44,21 +45,16 @@ BuildRequires: graphviz-devel BuildRequires: gtk2-devel BuildRequires: kfilemetadata5-devel -BuildRequires: khtml-devel BuildRequires: ki18n-devel -BuildRequires: kitemmodels-devel BuildRequires: knotifyconfig-devel BuildRequires: lensfun BuildRequires: lensfun-devel BuildRequires: libeigen3-devel -BuildRequires: libexiv2-devel >= 0.26 +BuildRequires: libexiv2-devel >= 0.25 BuildRequires: libexpat-devel BuildRequires: libgcrypt-devel BuildRequires: libgpod-devel BuildRequires: libjasper-devel -BuildRequires: libkdcraw-devel >= 15.12.0 -BuildRequires: libkexiv2-devel >= 15.12.0 -BuildRequires: libkgeomap-devel > 15.12.0 BuildRequires: libkipi-devel >= 16.04.0 BuildRequires: libksane-devel >= 15.12.0 BuildRequires: liblcms2-devel @@ -172,6 +168,7 @@ %if 0%{?suse_version} < 1320 %patch1 -p1 %patch2 -p1 +%patch3 -p1 %endif # Remove build time references so build-compare can do its work @@ -186,14 +183,7 @@ rm -f po/*/kipiplugin_vkontakte.po %build -%if 0%{?suse_version} < 1320 && !0%{?is_opensuse} -EXTRA_FLAGS="-DENABLE_LCMS2=OFF" -%else -EXTRA_FLAGS="-DENABLE_LCMS2=ON" -%endif - -%cmake_kf5 -d build -- -DENABLE_APPSTYLES=ON -DENABLE_MYSQLSUPPORT=on -DENABLE_OPENCV3=ON -DENABLE_MEDIAPLAYER=ON - +%cmake_kf5 -d build -- -DENABLE_APPSTYLES=ON -DENABLE_MEDIAPLAYER=ON %make_jobs VERBOSE=1 %install ++++++ Lower-minimum-exiv2-version.patch ++++++ >From c50103269935cf74beae646dd0da1c7ec003f430 Mon Sep 17 00:00:00 2001 From: Wolfgang Bauer <wbauer(a)tmo.at> Date: Tue, 30 Oct 2018 14:12:36 +0100 Subject: [PATCH] Lower minimum exiv2 version Digikam compiles fine with exiv2 0.25 as well, so make it accept that version to be able to build it on openSUSE Leap 42.3. --- core/CMakeLists.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/core/CMakeLists.txt b/core/CMakeLists.txt index 041865ffcc..4518ea1815 100644 --- a/core/CMakeLists.txt +++ b/core/CMakeLists.txt @@ -58,7 +58,7 @@ set(QT_MIN_VERSION "5.6.0") set(KIPI_MIN_VERSION "5.0.0") set(KSANE_MIN_VERSION "5.0.0") set(LENSFUN_MIN_VERSION "0.2.6.0") -set(EXIV2_MIN_VERSION "0.26") +set(EXIV2_MIN_VERSION "0.25") set(AKONADI_MIN_VERSION "4.89.0") # Akonadi Contact dependency set(CALENDAR_MIN_VERSION "4.81.0") # Calendar Core dependency set(QTAV_MIN_VERSION "1.12.0") -- 2.16.4

1 0

commit live-langset-data for openSUSE:Factory
by root 31 Oct '18

31 Oct '18

Hello community, here is the log from the commit of package live-langset-data for openSUSE:Factory checked in at 2018-10-31 13:21:49 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/live-langset-data (Old) and /work/SRC/openSUSE:Factory/.live-langset-data.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "live-langset-data" Wed Oct 31 13:21:49 2018 rev:9 rq:645689 version:2.0 Changes: -------- --- /work/SRC/openSUSE:Factory/live-langset-data/live-langset-data.changes 2018-06-19 12:01:57.565828169 +0200 +++ /work/SRC/openSUSE:Factory/.live-langset-data.new/live-langset-data.changes 2018-10-31 13:22:14.675012393 +0100 @@ -1,0 +2,5 @@ +Wed Oct 31 09:19:22 UTC 2018 - Fabian Vogt <fvogt(a)suse.com> + +- Support the conversion to json in yast2-country done for bsc#1013573 + +------------------------------------------------------------------- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ live-langset-data.spec ++++++ --- /var/tmp/diff_new_pack.kAAMR1/_old 2018-10-31 13:22:15.115011983 +0100 +++ /var/tmp/diff_new_pack.kAAMR1/_new 2018-10-31 13:22:15.115011983 +0100 @@ -12,7 +12,7 @@ # license that conforms to the Open Source Definition (Version 1.9) # published by the Open Source Initiative. -# Please submit bugfixes or comments via http://bugs.opensuse.org/ +# Please submit bugfixes or comments via https://bugs.opensuse.org/ # ++++++ getcountrydata.rb ++++++ --- /var/tmp/diff_new_pack.kAAMR1/_old 2018-10-31 13:22:15.139011961 +0100 +++ /var/tmp/diff_new_pack.kAAMR1/_new 2018-10-31 13:22:15.143011957 +0100 @@ -1,5 +1,7 @@ # encoding: utf-8 +require "json" + module Yast class GetcountrydataClient < Client def main @@ -9,9 +11,17 @@ Yast.import "OSRelease" langs = Language.GetLanguagesMap(true) + + consolefonts = nil + datafilepath = Directory.find_data_file("consolefonts.json") + + if datafilepath.nil? + consolefonts = SCR.Read(path(".target.yast2"), "consolefonts_#{OSRelease.id}.ycp") + consolefonts ||= SCR.Read(path(".target.yast2"), "consolefonts.ycp") + else + consolefonts = JSON.load(File.read(datafilepath)) + end - consolefonts = SCR.Read(path(".target.yast2"), "consolefonts_#{OSRelease.id}.ycp") - consolefonts ||= SCR.Read(path(".target.yast2"), "consolefonts.ycp") timezonemap = Language.GetLang2TimezoneMap(true) dir = ENV["OUTPUTDIR"] @@ -31,10 +41,17 @@ consolefont = consolefonts[lang[0,2]] end consolefont ||= [] - font = consolefont[0] || "" - unicodeMap = consolefont[1] || "" - screenMap = consolefont[2] || "" - magic = consolefont[3] || "" + if consolefont.is_a?(Hash) + font = consolefont["font"] || "" + unicodeMap = consolefont["unicodeMap"] || "" + screenMap = consolefont["screenMap"] || "" + magic = consolefont["magic"] || "" + else + font = consolefont[0] || "" + unicodeMap = consolefont[1] || "" + screenMap = consolefont[2] || "" + magic = consolefont[3] || "" + end timezone = timezonemap[lang] || "" contents = "RC_LANG='#{fqlanguage}'\n" +

1 0

commit python-pyo for openSUSE:Factory
by root 31 Oct '18

31 Oct '18

Hello community, here is the log from the commit of package python-pyo for openSUSE:Factory checked in at 2018-10-31 13:21:42 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/python-pyo (Old) and /work/SRC/openSUSE:Factory/.python-pyo.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "python-pyo" Wed Oct 31 13:21:42 2018 rev:2 rq:645632 version:0.9.1 Changes: -------- --- /work/SRC/openSUSE:Factory/python-pyo/python-pyo.changes 2018-05-29 10:28:37.452594183 +0200 +++ /work/SRC/openSUSE:Factory/.python-pyo.new/python-pyo.changes 2018-10-31 13:22:11.711015151 +0100 @@ -1,0 +2,16 @@ +Wed Oct 31 01:57:15 UTC 2018 - Todd R <toddrme2178(a)gmail.com> + +- Update to version 0.9.1 + * On Windows, use 'directsound' as the default audio host (much more + reliable than 'wasapi'). + * Fixed phase shifting between the frequency bands of FourBand and MultiBand. + * Added a new object: MultiBand, frequency splitter using Linkwitz-Riley + crossover filters. + * Fixed Compress output level when input's rms is above unity. + * Added the ability to remove a project from the project tree. + * Added getPrecision() function. Removed print statement when importing pyo. + User should use getVersion() and getPrecision() functions if needed. + * Fixed crash when asking for more input or output channels than available. + * Fixed Server window's Interpreter field scrolling history on MacOS. + +------------------------------------------------------------------- Old: ---- pyo_0.9.0-src.tar.bz2 New: ---- pyo_0.9.1-src.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ python-pyo.spec ++++++ --- /var/tmp/diff_new_pack.FqMp7H/_old 2018-10-31 13:22:12.319014585 +0100 +++ /var/tmp/diff_new_pack.FqMp7H/_new 2018-10-31 13:22:12.319014585 +0100 @@ -18,7 +18,7 @@ %{?!python_module:%define python_module() python-%{**} python3-%{**}} %define skip_python2 1 Name: python-pyo -Version: 0.9.0 +Version: 0.9.1 Release: 0 License: GPL-3.0 Summary: Python digital signal processing module @@ -53,7 +53,6 @@ %python_expand %fdupes %{buildroot}%{$python_sitearch} %files %{python_files} -%defattr(-,root,root,-) %doc ChangeLog README.md %license COPYING.txt COPYING.LESSER.txt %{python_sitearch}/* ++++++ pyo_0.9.0-src.tar.bz2 -> pyo_0.9.1-src.tar.bz2 ++++++ ++++ 4793 lines of diff (skipped)

1 0

commit python-sounddevice for openSUSE:Factory
by root 31 Oct '18

31 Oct '18

Hello community, here is the log from the commit of package python-sounddevice for openSUSE:Factory checked in at 2018-10-31 13:21:39 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/python-sounddevice (Old) and /work/SRC/openSUSE:Factory/.python-sounddevice.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "python-sounddevice" Wed Oct 31 13:21:39 2018 rev:2 rq:645617 version:0.3.12 Changes: -------- --- /work/SRC/openSUSE:Factory/python-sounddevice/python-sounddevice.changes 2018-05-15 10:31:56.667400152 +0200 +++ /work/SRC/openSUSE:Factory/.python-sounddevice.new/python-sounddevice.changes 2018-10-31 13:22:10.711016081 +0100 @@ -1,0 +2,6 @@ +Wed Oct 31 01:49:20 UTC 2018 - Todd R <toddrme2178(a)gmail.com> + +- Update to 0.3.12 + * Support for the dylib from Anaconda + +------------------------------------------------------------------- Old: ---- sounddevice-0.3.11.tar.gz New: ---- sounddevice-0.3.12.tar.gz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ python-sounddevice.spec ++++++ --- /var/tmp/diff_new_pack.2yJRFL/_old 2018-10-31 13:22:11.227015601 +0100 +++ /var/tmp/diff_new_pack.2yJRFL/_new 2018-10-31 13:22:11.231015597 +0100 @@ -18,7 +18,7 @@ %{?!python_module:%define python_module() python-%{**} python3-%{**}} Name: python-sounddevice -Version: 0.3.11 +Version: 0.3.12 Release: 0 Summary: Play and Record Sound with Python License: MIT @@ -28,6 +28,8 @@ BuildRequires: %{python_module cffi >= 1.0} BuildRequires: %{python_module devel} BuildRequires: %{python_module setuptools} +BuildRequires: fdupes +BuildRequires: portaudio BuildRequires: python-rpm-macros Requires: portaudio Requires: python-cffi >= 1.0 @@ -49,9 +51,9 @@ %install %python_install +%python_expand fdupes %{buildroot}%{$python_sitelib} %files %{python_files} -%defattr(-,root,root,-) %doc NEWS.rst README.rst %license LICENSE %{python_sitelib}/* ++++++ sounddevice-0.3.11.tar.gz -> sounddevice-0.3.12.tar.gz ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/sounddevice-0.3.11/NEWS.rst new/sounddevice-0.3.12/NEWS.rst --- old/sounddevice-0.3.11/NEWS.rst 2018-05-07 16:49:40.000000000 +0200 +++ new/sounddevice-0.3.12/NEWS.rst 2018-09-02 11:05:13.000000000 +0200 @@ -1,3 +1,6 @@ +0.3.12 (2018-09-02): + * Support for the dylib from Anaconda + 0.3.11 (2018-05-07): * Support for the DLL from ``conda-forge`` diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/sounddevice-0.3.11/PKG-INFO new/sounddevice-0.3.12/PKG-INFO --- old/sounddevice-0.3.11/PKG-INFO 2018-05-07 16:57:08.000000000 +0200 +++ new/sounddevice-0.3.12/PKG-INFO 2018-09-02 11:08:24.000000000 +0200 @@ -1,6 +1,6 @@ Metadata-Version: 2.1 Name: sounddevice -Version: 0.3.11 +Version: 0.3.12 Summary: Play and Record Sound with Python Home-page: http://python-sounddevice.readthedocs.io/ Author: Matthias Geier @@ -21,277 +21,9 @@ License: MIT -- see the file ``LICENSE`` for details. - .. image:: https://badge.fury.io/py/sounddevice.svg - :target: https://pypi.python.org/pypi/sounddevice/ - - .. image:: https://repology.org/badge/vertical-allrepos/python:sounddevice.svg - :target: https://repology.org/metapackage/python:sounddevice - - Requirements - ------------ - - Python: - Of course, you'll need Python_. - Any version where CFFI (see below) is supported should work. - If you don't have Python installed yet, you should get one of the - distributions which already include CFFI and NumPy (and many other useful - things), e.g. Anaconda_ or WinPython_. - - pip/setuptools: - Those are needed for the installation of the Python module and its - dependencies. Most systems will have these installed already, but if not, - you should install it with your package manager or you can download and - install ``pip`` and ``setuptools`` as described on the `pip installation`_ - page. - If you happen to have ``pip`` but not ``setuptools``, use this command:: - - python3 -m pip install setuptools --user - - To upgrade to a newer version of an already installed package (including - ``pip`` itself), use the ``--upgrade`` flag. - - CFFI: - The `C Foreign Function Interface for Python`_ is used to access the C-API - of the PortAudio library from within Python. It supports CPython 2.6, 2.7, - 3.x; and is distributed with PyPy_. - If it's not installed already, you should install it with your package - manager (the package might be called ``python3-cffi`` or similar), or you can - get it with:: - - python3 -m pip install cffi --user - - PortAudio library: - The PortAudio_ library must be installed on your system (and CFFI must be - able to find it). Again, you should use your package manager to install it - (the package might be called ``libportaudio2`` or similar). - If you prefer, you can of course also download the sources and compile the - library yourself. If you are using Mac OS X or Windows, the library will be - installed automagically with *pip* (see "Installation" below). - - NumPy (optional): - NumPy_ is only needed if you want to play back and record NumPy arrays. - The classes `sounddevice.RawStream`, `sounddevice.RawInputStream` and - `sounddevice.RawOutputStream` use plain Python buffer objects and don't need - NumPy at all. - If you need NumPy, you should install it with your package manager or use a - Python distribution that already includes NumPy (see above). - You can also install NumPy with ``pip``, but depending on your platform, this - might require a compiler and several additional libraries:: - - python3 -m pip install NumPy --user - + .. _Python: https://www.python.org/ .. _PortAudio: http://www.portaudio.com/ .. _NumPy: http://www.numpy.org/ - .. _Python: https://www.python.org/ - .. _Anaconda: https://www.anaconda.com/download/ - .. _WinPython: http://winpython.github.io/ - .. _C Foreign Function Interface for Python: http://cffi.readthedocs.io/ - .. _PyPy: http://pypy.org/ - .. _pip installation: https://pip.pypa.io/en/latest/installing/ - - Installation - ------------ - - Once you have installed the above-mentioned dependencies, you can use pip - to download and install the latest release with a single command:: - - python3 -m pip install sounddevice --user - - If you want to install it system-wide for all users (assuming you have the - necessary rights), you can just drop the ``--user`` option. - If you have installed the module already, you can use the ``--upgrade`` flag to - get the newest release. - - To un-install, use:: - - python3 -m pip uninstall sounddevice - - If you are using Windows, you can alternatively install one of the packages - provided at https://www.lfd.uci.edu/~gohlke/pythonlibs/#sounddevice. - The PortAudio library is also included in the package and you can get the rest - of the dependencies on the same page. - - Usage - ----- - - First, import the module: - - .. code:: python - - import sounddevice as sd - - Playback - ^^^^^^^^ - - Assuming you have a NumPy array named ``myarray`` holding audio data with a - sampling frequency of ``fs`` (in the most cases this will be 44100 or 48000 - frames per second), you can play it back with `sounddevice.play()`: - - .. code:: python - - sd.play(myarray, fs) - - This function returns immediately but continues playing the audio signal in the - background. You can stop playback with `sounddevice.stop()`: - - .. code:: python - - sd.stop() - - If you know that you will use the same sampling frequency for a while, you can - set it as default using `sounddevice.default.samplerate`: - - .. code:: python - - sd.default.samplerate = fs - - After that, you can drop the *samplerate* argument: - - .. code:: python - - sd.play(myarray) - - Recording - ^^^^^^^^^ - - To record audio data from your sound device into a NumPy array, use - `sounddevice.rec()`: - - .. code:: python - - duration = 10.5 # seconds - myrecording = sd.rec(int(duration * fs), samplerate=fs, channels=2) - - Again, for repeated use you can set defaults using `sounddevice.default`: - - .. code:: python - - sd.default.samplerate = fs - sd.default.channels = 2 - - After that, you can drop the additional arguments: - - .. code:: python - - myrecording = sd.rec(duration * fs) - - This function also returns immediately but continues recording in the - background. In the meantime, you can run other commands. If you want to check - if the recording is finished, you should use `sounddevice.wait()`: - - .. code:: python - - sd.wait() - - If the recording was already finished, this returns immediately; if not, it - waits and returns as soon as the recording is finished. - - Alternatively, you could have used the *blocking* argument in the first place: - - .. code:: python - - myrecording = sd.rec(duration * fs, blocking=True) - - By default, the recorded array has the data type ``'float32'`` (see - `sounddevice.default.dtype`), but this can be changed with the *dtype* argument: - - .. code:: python - - myrecording = sd.rec(duration * fs, dtype='float64') - - Simultaneous Playback and Recording - ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - - To play back an array and record at the same time, use `sounddevice.playrec()`: - - .. code:: python - - myrecording = sd.playrec(myarray, fs, channels=2) - - The number of output channels is obtained from ``myarray``, but the number of - input channels still has to be specified. - - Again, default values can be used: - - .. code:: python - - sd.default.samplerate = fs - sd.default.channels = 2 - myrecording = sd.playrec(myarray) - - In this case the number of output channels is still taken from ``myarray`` - (which may or may not have 2 channels), but the number of input channels is - taken from `sounddevice.default.channels`. - - Device Selection - ^^^^^^^^^^^^^^^^ - - In many cases, the default input/output device(s) will be the one(s) you want, - but it is of course possible to choose a different device. - Use `sounddevice.query_devices()` to get a list of supported devices. - The same list can be obtained from a terminal by typing the command :: - - python3 -m sounddevice - - You can use the corresponding device ID to select a desired device by assigning - to `sounddevice.default.device` or by passing it as *device* argument to - `sounddevice.play()`, `sounddevice.Stream()` etc. - - Instead of the numerical device ID, you can also use a space-separated list of - case-insensitive substrings of the device name (and the host API name, if - needed). See `sounddevice.default.device` for details. - - .. code:: python - - import sounddevice as sd - sd.default.samplerate = 44100 - sd.default.device = 'digital output' - sd.play(myarray) - - Callback Streams - ^^^^^^^^^^^^^^^^ - - Callback "wire" with `sounddevice.Stream`: - - .. code:: python - - import sounddevice as sd - duration = 5.5 # seconds - - def callback(indata, outdata, frames, time, status): - if status: - print(status) - outdata[:] = indata - - with sd.Stream(channels=2, callback=callback): - sd.sleep(int(duration * 1000)) - - Same thing with `sounddevice.RawStream`: - - .. code:: python - - import sounddevice as sd - duration = 5.5 # seconds - - def callback(indata, outdata, frames, time, status): - if status: - print(status) - outdata[:] = indata - - with sd.RawStream(channels=2, dtype='int24', callback=callback): - sd.sleep(int(duration * 1000)) - - .. note:: We are using 24-bit samples here for no particular reason - (just because we can). - - Blocking Read/Write Streams - ^^^^^^^^^^^^^^^^^^^^^^^^^^^ - - Instead of using a callback function, you can also use the blocking methods - `sounddevice.Stream.read()` and `sounddevice.Stream.write()` (and of course the - corresponding methods in `sounddevice.InputStream`, `sounddevice.OutputStream`, - `sounddevice.RawStream`, `sounddevice.RawInputStream` and - `sounddevice.RawOutputStream`). Keywords: sound,audio,PortAudio,play,record,playrec Platform: any diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/sounddevice-0.3.11/README.rst new/sounddevice-0.3.12/README.rst --- old/sounddevice-0.3.11/README.rst 2017-12-21 20:43:57.000000000 +0100 +++ new/sounddevice-0.3.12/README.rst 2018-08-22 12:11:03.000000000 +0200 @@ -13,274 +13,6 @@ License: MIT -- see the file ``LICENSE`` for details. -.. image:: https://badge.fury.io/py/sounddevice.svg - :target: https://pypi.python.org/pypi/sounddevice/ - -.. image:: https://repology.org/badge/vertical-allrepos/python:sounddevice.svg - :target: https://repology.org/metapackage/python:sounddevice - -Requirements ------------- - -Python: - Of course, you'll need Python_. - Any version where CFFI (see below) is supported should work. - If you don't have Python installed yet, you should get one of the - distributions which already include CFFI and NumPy (and many other useful - things), e.g. Anaconda_ or WinPython_. - -pip/setuptools: - Those are needed for the installation of the Python module and its - dependencies. Most systems will have these installed already, but if not, - you should install it with your package manager or you can download and - install ``pip`` and ``setuptools`` as described on the `pip installation`_ - page. - If you happen to have ``pip`` but not ``setuptools``, use this command:: - - python3 -m pip install setuptools --user - - To upgrade to a newer version of an already installed package (including - ``pip`` itself), use the ``--upgrade`` flag. - -CFFI: - The `C Foreign Function Interface for Python`_ is used to access the C-API - of the PortAudio library from within Python. It supports CPython 2.6, 2.7, - 3.x; and is distributed with PyPy_. - If it's not installed already, you should install it with your package - manager (the package might be called ``python3-cffi`` or similar), or you can - get it with:: - - python3 -m pip install cffi --user - -PortAudio library: - The PortAudio_ library must be installed on your system (and CFFI must be - able to find it). Again, you should use your package manager to install it - (the package might be called ``libportaudio2`` or similar). - If you prefer, you can of course also download the sources and compile the - library yourself. If you are using Mac OS X or Windows, the library will be - installed automagically with *pip* (see "Installation" below). - -NumPy (optional): - NumPy_ is only needed if you want to play back and record NumPy arrays. - The classes `sounddevice.RawStream`, `sounddevice.RawInputStream` and - `sounddevice.RawOutputStream` use plain Python buffer objects and don't need - NumPy at all. - If you need NumPy, you should install it with your package manager or use a - Python distribution that already includes NumPy (see above). - You can also install NumPy with ``pip``, but depending on your platform, this - might require a compiler and several additional libraries:: - - python3 -m pip install NumPy --user - +.. _Python: https://www.python.org/ .. _PortAudio: http://www.portaudio.com/ .. _NumPy: http://www.numpy.org/ -.. _Python: https://www.python.org/ -.. _Anaconda: https://www.anaconda.com/download/ -.. _WinPython: http://winpython.github.io/ -.. _C Foreign Function Interface for Python: http://cffi.readthedocs.io/ -.. _PyPy: http://pypy.org/ -.. _pip installation: https://pip.pypa.io/en/latest/installing/ - -Installation ------------- - -Once you have installed the above-mentioned dependencies, you can use pip -to download and install the latest release with a single command:: - - python3 -m pip install sounddevice --user - -If you want to install it system-wide for all users (assuming you have the -necessary rights), you can just drop the ``--user`` option. -If you have installed the module already, you can use the ``--upgrade`` flag to -get the newest release. - -To un-install, use:: - - python3 -m pip uninstall sounddevice - -If you are using Windows, you can alternatively install one of the packages -provided at https://www.lfd.uci.edu/~gohlke/pythonlibs/#sounddevice. -The PortAudio library is also included in the package and you can get the rest -of the dependencies on the same page. - -Usage ------ - -First, import the module: - -.. code:: python - - import sounddevice as sd - -Playback -^^^^^^^^ - -Assuming you have a NumPy array named ``myarray`` holding audio data with a -sampling frequency of ``fs`` (in the most cases this will be 44100 or 48000 -frames per second), you can play it back with `sounddevice.play()`: - -.. code:: python - - sd.play(myarray, fs) - -This function returns immediately but continues playing the audio signal in the -background. You can stop playback with `sounddevice.stop()`: - -.. code:: python - - sd.stop() - -If you know that you will use the same sampling frequency for a while, you can -set it as default using `sounddevice.default.samplerate`: - -.. code:: python - - sd.default.samplerate = fs - -After that, you can drop the *samplerate* argument: - -.. code:: python - - sd.play(myarray) - -Recording -^^^^^^^^^ - -To record audio data from your sound device into a NumPy array, use -`sounddevice.rec()`: - -.. code:: python - - duration = 10.5 # seconds - myrecording = sd.rec(int(duration * fs), samplerate=fs, channels=2) - -Again, for repeated use you can set defaults using `sounddevice.default`: - -.. code:: python - - sd.default.samplerate = fs - sd.default.channels = 2 - -After that, you can drop the additional arguments: - -.. code:: python - - myrecording = sd.rec(duration * fs) - -This function also returns immediately but continues recording in the -background. In the meantime, you can run other commands. If you want to check -if the recording is finished, you should use `sounddevice.wait()`: - -.. code:: python - - sd.wait() - -If the recording was already finished, this returns immediately; if not, it -waits and returns as soon as the recording is finished. - -Alternatively, you could have used the *blocking* argument in the first place: - -.. code:: python - - myrecording = sd.rec(duration * fs, blocking=True) - -By default, the recorded array has the data type ``'float32'`` (see -`sounddevice.default.dtype`), but this can be changed with the *dtype* argument: - -.. code:: python - - myrecording = sd.rec(duration * fs, dtype='float64') - -Simultaneous Playback and Recording -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -To play back an array and record at the same time, use `sounddevice.playrec()`: - -.. code:: python - - myrecording = sd.playrec(myarray, fs, channels=2) - -The number of output channels is obtained from ``myarray``, but the number of -input channels still has to be specified. - -Again, default values can be used: - -.. code:: python - - sd.default.samplerate = fs - sd.default.channels = 2 - myrecording = sd.playrec(myarray) - -In this case the number of output channels is still taken from ``myarray`` -(which may or may not have 2 channels), but the number of input channels is -taken from `sounddevice.default.channels`. - -Device Selection -^^^^^^^^^^^^^^^^ - -In many cases, the default input/output device(s) will be the one(s) you want, -but it is of course possible to choose a different device. -Use `sounddevice.query_devices()` to get a list of supported devices. -The same list can be obtained from a terminal by typing the command :: - - python3 -m sounddevice - -You can use the corresponding device ID to select a desired device by assigning -to `sounddevice.default.device` or by passing it as *device* argument to -`sounddevice.play()`, `sounddevice.Stream()` etc. - -Instead of the numerical device ID, you can also use a space-separated list of -case-insensitive substrings of the device name (and the host API name, if -needed). See `sounddevice.default.device` for details. - -.. code:: python - - import sounddevice as sd - sd.default.samplerate = 44100 - sd.default.device = 'digital output' - sd.play(myarray) - -Callback Streams -^^^^^^^^^^^^^^^^ - -Callback "wire" with `sounddevice.Stream`: - -.. code:: python - - import sounddevice as sd - duration = 5.5 # seconds - - def callback(indata, outdata, frames, time, status): - if status: - print(status) - outdata[:] = indata - - with sd.Stream(channels=2, callback=callback): - sd.sleep(int(duration * 1000)) - -Same thing with `sounddevice.RawStream`: - -.. code:: python - - import sounddevice as sd - duration = 5.5 # seconds - - def callback(indata, outdata, frames, time, status): - if status: - print(status) - outdata[:] = indata - - with sd.RawStream(channels=2, dtype='int24', callback=callback): - sd.sleep(int(duration * 1000)) - -.. note:: We are using 24-bit samples here for no particular reason - (just because we can). - -Blocking Read/Write Streams -^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -Instead of using a callback function, you can also use the blocking methods -`sounddevice.Stream.read()` and `sounddevice.Stream.write()` (and of course the -corresponding methods in `sounddevice.InputStream`, `sounddevice.OutputStream`, -`sounddevice.RawStream`, `sounddevice.RawInputStream` and -`sounddevice.RawOutputStream`). diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/sounddevice-0.3.11/doc/CONTRIBUTING.rst new/sounddevice-0.3.12/doc/CONTRIBUTING.rst --- old/sounddevice-0.3.11/doc/CONTRIBUTING.rst 1970-01-01 01:00:00.000000000 +0100 +++ new/sounddevice-0.3.12/doc/CONTRIBUTING.rst 2017-12-21 20:39:26.000000000 +0100 @@ -0,0 +1,49 @@ +Contributing +------------ + +If you find bugs, errors, omissions or other things that need improvement, +please create an issue or a pull request at +https://github.com/spatialaudio/python-sounddevice/. +Contributions are always welcome! + +Instead of pip-installing the latest release from PyPI, you should get the +newest development version from Github_:: + + git clone --recursive https://github.com/spatialaudio/python-sounddevice.git + cd python-sounddevice + python3 setup.py develop --user + +.. _Github: https://github.com/spatialaudio/python-sounddevice/ + +This way, your installation always stays up-to-date, even if you pull new +changes from the Github repository. + +If you prefer, you can also replace the last command with:: + + python3 -m pip install --user -e . + +... where ``-e`` stands for ``--editable``. + +Whenever the file ``sounddevice_build.py`` changes (either because you edited it +or it was updated by pulling from Github or switching branches), you have to run +the last command again. + +If you used the ``--recursive`` option when cloning, the dynamic libraries for +*macOS* and *Windows* should already be available. +If not, you can get the submodule with:: + + git submodule update --init + +If you make changes to the documentation, you can locally re-create the HTML +pages using Sphinx_. +You can install it and a few other necessary packages with:: + + python3 -m pip install -r doc/requirements.txt --user + +To create the HTML pages, use:: + + python3 setup.py build_sphinx + +The generated files will be available in the directory ``build/sphinx/html/``. + +.. _Sphinx: http://sphinx-doc.org/ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/sounddevice-0.3.11/doc/api.rst new/sounddevice-0.3.12/doc/api.rst --- old/sounddevice-0.3.11/doc/api.rst 1970-01-01 01:00:00.000000000 +0100 +++ new/sounddevice-0.3.12/doc/api.rst 2018-08-22 12:11:03.000000000 +0200 @@ -0,0 +1,44 @@ +API Documentation +================= + +.. automodule:: sounddevice + :members: + :undoc-members: + :exclude-members: RawInputStream, RawOutputStream, RawStream, + InputStream, OutputStream, Stream, + CallbackFlags, CallbackStop, CallbackAbort, + PortAudioError, DeviceList, + AsioSettings, CoreAudioSettings, WasapiSettings + +.. autoclass:: Stream + :members: + :undoc-members: + :inherited-members: + +.. autoclass:: InputStream + +.. autoclass:: OutputStream + +.. autoclass:: RawStream + :members: read, write + +.. autoclass:: RawInputStream + +.. autoclass:: RawOutputStream + +.. autoclass:: DeviceList + +.. autoclass:: CallbackFlags + :members: + +.. autoclass:: CallbackStop + +.. autoclass:: CallbackAbort + +.. autoclass:: PortAudioError + +.. autoclass:: AsioSettings + +.. autoclass:: CoreAudioSettings + +.. autoclass:: WasapiSettings diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/sounddevice-0.3.11/doc/conf.py new/sounddevice-0.3.12/doc/conf.py --- old/sounddevice-0.3.11/doc/conf.py 2018-05-04 09:43:31.000000000 +0200 +++ new/sounddevice-0.3.12/doc/conf.py 2018-08-22 12:16:04.000000000 +0200 @@ -99,6 +99,11 @@ #today = '' # Else, today_fmt is used as the format for a strftime call. #today_fmt = '%B %d, %Y' +try: + today = check_output(['git', 'show', '-s', '--format=%ad', '--date=short']) + today = today.decode().strip() +except Exception: + today = '<unknown date>' # List of patterns, relative to source directory, that match files and # directories to ignore when looking for source files. @@ -106,7 +111,7 @@ # The reST default role (used for this markup: `text`) to use for all # documents. -#default_role = None +default_role = 'any' # If true, '()' will be appended to :func: etc. cross-reference text. #add_function_parentheses = True @@ -138,7 +143,9 @@ # Theme options are theme-specific and customize the look and feel of a theme # further. For a list of options available for each theme, see the # documentation. -#html_theme_options = {} +html_theme_options = { + 'collapse_navigation': False, +} # Add any paths that contain custom themes here, relative to this directory. #html_theme_path = [] diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/sounddevice-0.3.11/doc/examples.rst new/sounddevice-0.3.12/doc/examples.rst --- old/sounddevice-0.3.11/doc/examples.rst 2017-11-29 11:26:21.000000000 +0100 +++ new/sounddevice-0.3.12/doc/examples.rst 2018-08-22 12:11:03.000000000 +0200 @@ -1,5 +1,3 @@ -:orphan: - Example Programs ================ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/sounddevice-0.3.11/doc/fake__sounddevice.py new/sounddevice-0.3.12/doc/fake__sounddevice.py --- old/sounddevice-0.3.11/doc/fake__sounddevice.py 2017-11-29 11:26:21.000000000 +0100 +++ new/sounddevice-0.3.12/doc/fake__sounddevice.py 2018-08-21 20:10:46.000000000 +0200 @@ -4,8 +4,17 @@ import ctypes +old_find_library = ctypes.util.find_library + + +def new_find_library(name): + if 'portaudio' in name.lower(): + return NotImplemented + return old_find_library(name) + + # Monkey-patch ctypes to disable searching for PortAudio -ctypes.util.find_library = lambda _: NotImplemented +ctypes.util.find_library = new_find_library class ffi(object): diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/sounddevice-0.3.11/doc/index.rst new/sounddevice-0.3.12/doc/index.rst --- old/sounddevice-0.3.11/doc/index.rst 2017-11-29 11:26:21.000000000 +0100 +++ new/sounddevice-0.3.12/doc/index.rst 2018-08-22 12:11:03.000000000 +0200 @@ -1,75 +1,16 @@ -.. default-role:: py:obj - .. include:: ../README.rst -.. only:: html - - More Examples - ^^^^^^^^^^^^^ - - For more examples, have a look at the :doc:`examples`. - -.. include:: ../CONTRIBUTING.rst - -.. default-role:: any - -API Documentation ------------------ - -.. automodule:: sounddevice - :members: - :undoc-members: - :exclude-members: RawInputStream, RawOutputStream, RawStream, - InputStream, OutputStream, Stream, - CallbackFlags, CallbackStop, CallbackAbort, - PortAudioError, DeviceList, - AsioSettings, CoreAudioSettings, WasapiSettings - -.. autoclass:: Stream - :members: - :undoc-members: - :inherited-members: - -.. autoclass:: InputStream - -.. autoclass:: OutputStream - -.. autoclass:: RawStream - :members: read, write +---- -.. autoclass:: RawInputStream +.. toctree:: -.. autoclass:: RawOutputStream - -.. autoclass:: DeviceList - -.. autoclass:: CallbackFlags - :members: - -.. autoclass:: CallbackStop - -.. autoclass:: CallbackAbort - -.. autoclass:: PortAudioError - -.. autoclass:: AsioSettings - -.. autoclass:: CoreAudioSettings - -.. autoclass:: WasapiSettings + installation + usage + examples + CONTRIBUTING + api + version-history .. only:: html - Index - ----- - :ref:`genindex` - -Version History ---------------- - -.. default-role:: py:obj - -.. include:: ../NEWS.rst - -.. default-role:: diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/sounddevice-0.3.11/doc/installation.rst new/sounddevice-0.3.12/doc/installation.rst --- old/sounddevice-0.3.11/doc/installation.rst 1970-01-01 01:00:00.000000000 +0100 +++ new/sounddevice-0.3.12/doc/installation.rst 2018-08-22 12:11:03.000000000 +0200 @@ -0,0 +1,85 @@ +Installation +============ + +First of all, you'll need Python_. +Any version where CFFI_ is supported should work. +If you don't have Python installed yet, you should get one of the +distributions which already include CFFI and NumPy_ (and many other useful +things), e.g. Anaconda_ or WinPython_. + +.. only:: html + + .. image:: https://anaconda.org/conda-forge/python-sounddevice/badges/version.svg + :target: https://anaconda.org/conda-forge/python-sounddevice + +If you are using the ``conda`` package manager (e.g. with Anaconda_ for +Linux/macOS/Windows), you can install the ``sounddevice`` module from the +``conda-forge`` channel:: + + conda install -c conda-forge python-sounddevice + +There are also packages for several other package managers: + +.. only:: html + + .. image:: https://repology.org/badge/vertical-allrepos/python:sounddevice.svg + :target: https://repology.org/metapackage/python:sounddevice + +.. only:: latex + + https://repology.org/metapackage/python:sounddevice + +If you are using Windows, you can alternatively install one of the packages +provided at https://www.lfd.uci.edu/~gohlke/pythonlibs/#sounddevice. +The PortAudio_ library is included in the package and you can get the rest +of the dependencies on the same page. + +Note that some of the aforementioned packages may be out-of-date. +You can always get the newest ``sounddevice`` release from PyPI_ +(using ``pip``). +If you want to try the latest development version, have a look at the section +about :doc:`CONTRIBUTING`. + +.. only:: html + + .. image:: https://badge.fury.io/py/sounddevice.svg + :target: https://pypi.org/project/sounddevice/ + +To install the latest release from PyPI, use:: + + python3 -m pip install sounddevice --user + +If you want to install it system-wide for all users (assuming you have the +necessary rights), you can just drop the ``--user`` option. +If you have installed the module already, you can use the ``--upgrade`` flag to +get the newest release. + +To un-install, use:: + + python3 -m pip uninstall sounddevice + +If you install the ``sounddevice`` module with ``pip`` on macOS or Windows, the +PortAudio_ library will be installed automagically. +On other platforms, you might have to install PortAudio with your package +manager (the package might be called ``libportaudio2`` or similar). + +You might also have to install CFFI_ (from a package called ``python3-cffi`` or +similar). + +NumPy_ is only needed if you want to play back and record NumPy arrays. +The classes `sounddevice.RawStream`, `sounddevice.RawInputStream` and +`sounddevice.RawOutputStream` use plain Python buffer objects and don't need +NumPy at all. +If you need NumPy, you should install it with your package manager (from a +package named ``python3-numpy`` or similar) or use a Python distribution that +already includes NumPy (see above). +You can also install NumPy with ``pip``, but depending on your platform, this +might require a compiler and several additional libraries. + +.. _PortAudio: http://www.portaudio.com/ +.. _NumPy: http://www.numpy.org/ +.. _Python: https://www.python.org/ +.. _Anaconda: https://www.anaconda.com/download/ +.. _WinPython: http://winpython.github.io/ +.. _CFFI: http://cffi.readthedocs.io/ +.. _PyPI: https://pypi.org/project/sounddevice/ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/sounddevice-0.3.11/doc/usage.rst new/sounddevice-0.3.12/doc/usage.rst --- old/sounddevice-0.3.11/doc/usage.rst 1970-01-01 01:00:00.000000000 +0100 +++ new/sounddevice-0.3.12/doc/usage.rst 2018-08-22 12:11:03.000000000 +0200 @@ -0,0 +1,181 @@ +Usage +===== + +First, import the module: + +.. code:: python + + import sounddevice as sd + +Playback +-------- + +Assuming you have a NumPy array named ``myarray`` holding audio data with a +sampling frequency of ``fs`` (in the most cases this will be 44100 or 48000 +frames per second), you can play it back with `sounddevice.play()`: + +.. code:: python + + sd.play(myarray, fs) + +This function returns immediately but continues playing the audio signal in the +background. You can stop playback with `sounddevice.stop()`: + +.. code:: python + + sd.stop() + +If you know that you will use the same sampling frequency for a while, you can +set it as default using `sounddevice.default.samplerate`: + +.. code:: python + + sd.default.samplerate = fs + +After that, you can drop the *samplerate* argument: + +.. code:: python + + sd.play(myarray) + +Recording +--------- + +To record audio data from your sound device into a NumPy array, use +`sounddevice.rec()`: + +.. code:: python + + duration = 10.5 # seconds + myrecording = sd.rec(int(duration * fs), samplerate=fs, channels=2) + +Again, for repeated use you can set defaults using `sounddevice.default`: + +.. code:: python + + sd.default.samplerate = fs + sd.default.channels = 2 + +After that, you can drop the additional arguments: + +.. code:: python + + myrecording = sd.rec(int(duration * fs)) + +This function also returns immediately but continues recording in the +background. In the meantime, you can run other commands. If you want to check +if the recording is finished, you should use `sounddevice.wait()`: + +.. code:: python + + sd.wait() + +If the recording was already finished, this returns immediately; if not, it +waits and returns as soon as the recording is finished. + +Alternatively, you could have used the *blocking* argument in the first place: + +.. code:: python + + myrecording = sd.rec(duration * fs, blocking=True) + +By default, the recorded array has the data type ``'float32'`` (see +`sounddevice.default.dtype`), but this can be changed with the *dtype* argument: + +.. code:: python + + myrecording = sd.rec(duration * fs, dtype='float64') + +Simultaneous Playback and Recording +----------------------------------- + +To play back an array and record at the same time, use `sounddevice.playrec()`: + +.. code:: python + + myrecording = sd.playrec(myarray, fs, channels=2) + +The number of output channels is obtained from ``myarray``, but the number of +input channels still has to be specified. + +Again, default values can be used: + +.. code:: python + + sd.default.samplerate = fs + sd.default.channels = 2 + myrecording = sd.playrec(myarray) + +In this case the number of output channels is still taken from ``myarray`` +(which may or may not have 2 channels), but the number of input channels is +taken from `sounddevice.default.channels`. + +Device Selection +---------------- + +In many cases, the default input/output device(s) will be the one(s) you want, +but it is of course possible to choose a different device. +Use `sounddevice.query_devices()` to get a list of supported devices. +The same list can be obtained from a terminal by typing the command :: + + python3 -m sounddevice + +You can use the corresponding device ID to select a desired device by assigning +to `sounddevice.default.device` or by passing it as *device* argument to +`sounddevice.play()`, `sounddevice.Stream()` etc. + +Instead of the numerical device ID, you can also use a space-separated list of +case-insensitive substrings of the device name (and the host API name, if +needed). See `sounddevice.default.device` for details. + +.. code:: python + + import sounddevice as sd + sd.default.samplerate = 44100 + sd.default.device = 'digital output' + sd.play(myarray) + +Callback Streams +---------------- + +Callback "wire" with `sounddevice.Stream`: + +.. code:: python + + import sounddevice as sd + duration = 5.5 # seconds + + def callback(indata, outdata, frames, time, status): + if status: + print(status) + outdata[:] = indata + + with sd.Stream(channels=2, callback=callback): + sd.sleep(int(duration * 1000)) + +Same thing with `sounddevice.RawStream`: + +.. code:: python + + import sounddevice as sd + duration = 5.5 # seconds + + def callback(indata, outdata, frames, time, status): + if status: + print(status) + outdata[:] = indata + + with sd.RawStream(channels=2, dtype='int24', callback=callback): + sd.sleep(int(duration * 1000)) + +.. note:: We are using 24-bit samples here for no particular reason + (just because we can). + +Blocking Read/Write Streams +--------------------------- + +Instead of using a callback function, you can also use the blocking methods +`sounddevice.Stream.read()` and `sounddevice.Stream.write()` (and of course the +corresponding methods in `sounddevice.InputStream`, `sounddevice.OutputStream`, +`sounddevice.RawStream`, `sounddevice.RawInputStream` and +`sounddevice.RawOutputStream`). diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/sounddevice-0.3.11/doc/version-history.rst new/sounddevice-0.3.12/doc/version-history.rst --- old/sounddevice-0.3.11/doc/version-history.rst 1970-01-01 01:00:00.000000000 +0100 +++ new/sounddevice-0.3.12/doc/version-history.rst 2018-08-22 12:11:03.000000000 +0200 @@ -0,0 +1,8 @@ +Version History +=============== + +.. default-role:: py:obj + +.. include:: ../NEWS.rst + +.. default-role:: diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/sounddevice-0.3.11/setup.cfg new/sounddevice-0.3.12/setup.cfg --- old/sounddevice-0.3.11/setup.cfg 2018-05-07 16:57:08.000000000 +0200 +++ new/sounddevice-0.3.12/setup.cfg 2018-09-02 11:08:24.000000000 +0200 @@ -1,3 +1,6 @@ +[metadata] +license_file = LICENSE + [egg_info] tag_build = tag_date = 0 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/sounddevice-0.3.11/sounddevice.egg-info/PKG-INFO new/sounddevice-0.3.12/sounddevice.egg-info/PKG-INFO --- old/sounddevice-0.3.11/sounddevice.egg-info/PKG-INFO 2018-05-07 16:57:08.000000000 +0200 +++ new/sounddevice-0.3.12/sounddevice.egg-info/PKG-INFO 2018-09-02 11:08:24.000000000 +0200 @@ -1,6 +1,6 @@ Metadata-Version: 2.1 Name: sounddevice -Version: 0.3.11 +Version: 0.3.12 Summary: Play and Record Sound with Python Home-page: http://python-sounddevice.readthedocs.io/ Author: Matthias Geier @@ -21,277 +21,9 @@ License: MIT -- see the file ``LICENSE`` for details. - .. image:: https://badge.fury.io/py/sounddevice.svg - :target: https://pypi.python.org/pypi/sounddevice/ - - .. image:: https://repology.org/badge/vertical-allrepos/python:sounddevice.svg - :target: https://repology.org/metapackage/python:sounddevice - - Requirements - ------------ - - Python: - Of course, you'll need Python_. - Any version where CFFI (see below) is supported should work. - If you don't have Python installed yet, you should get one of the - distributions which already include CFFI and NumPy (and many other useful - things), e.g. Anaconda_ or WinPython_. - - pip/setuptools: - Those are needed for the installation of the Python module and its - dependencies. Most systems will have these installed already, but if not, - you should install it with your package manager or you can download and - install ``pip`` and ``setuptools`` as described on the `pip installation`_ - page. - If you happen to have ``pip`` but not ``setuptools``, use this command:: - - python3 -m pip install setuptools --user - - To upgrade to a newer version of an already installed package (including - ``pip`` itself), use the ``--upgrade`` flag. - - CFFI: - The `C Foreign Function Interface for Python`_ is used to access the C-API - of the PortAudio library from within Python. It supports CPython 2.6, 2.7, - 3.x; and is distributed with PyPy_. - If it's not installed already, you should install it with your package - manager (the package might be called ``python3-cffi`` or similar), or you can - get it with:: - - python3 -m pip install cffi --user - - PortAudio library: - The PortAudio_ library must be installed on your system (and CFFI must be - able to find it). Again, you should use your package manager to install it - (the package might be called ``libportaudio2`` or similar). - If you prefer, you can of course also download the sources and compile the - library yourself. If you are using Mac OS X or Windows, the library will be - installed automagically with *pip* (see "Installation" below). - - NumPy (optional): - NumPy_ is only needed if you want to play back and record NumPy arrays. - The classes `sounddevice.RawStream`, `sounddevice.RawInputStream` and - `sounddevice.RawOutputStream` use plain Python buffer objects and don't need - NumPy at all. - If you need NumPy, you should install it with your package manager or use a - Python distribution that already includes NumPy (see above). - You can also install NumPy with ``pip``, but depending on your platform, this - might require a compiler and several additional libraries:: - - python3 -m pip install NumPy --user - + .. _Python: https://www.python.org/ .. _PortAudio: http://www.portaudio.com/ .. _NumPy: http://www.numpy.org/ - .. _Python: https://www.python.org/ - .. _Anaconda: https://www.anaconda.com/download/ - .. _WinPython: http://winpython.github.io/ - .. _C Foreign Function Interface for Python: http://cffi.readthedocs.io/ - .. _PyPy: http://pypy.org/ - .. _pip installation: https://pip.pypa.io/en/latest/installing/ - - Installation - ------------ - - Once you have installed the above-mentioned dependencies, you can use pip - to download and install the latest release with a single command:: - - python3 -m pip install sounddevice --user - - If you want to install it system-wide for all users (assuming you have the - necessary rights), you can just drop the ``--user`` option. - If you have installed the module already, you can use the ``--upgrade`` flag to - get the newest release. - - To un-install, use:: - - python3 -m pip uninstall sounddevice - - If you are using Windows, you can alternatively install one of the packages - provided at https://www.lfd.uci.edu/~gohlke/pythonlibs/#sounddevice. - The PortAudio library is also included in the package and you can get the rest - of the dependencies on the same page. - - Usage - ----- - - First, import the module: - - .. code:: python - - import sounddevice as sd - - Playback - ^^^^^^^^ - - Assuming you have a NumPy array named ``myarray`` holding audio data with a - sampling frequency of ``fs`` (in the most cases this will be 44100 or 48000 - frames per second), you can play it back with `sounddevice.play()`: - - .. code:: python - - sd.play(myarray, fs) - - This function returns immediately but continues playing the audio signal in the - background. You can stop playback with `sounddevice.stop()`: - - .. code:: python - - sd.stop() - - If you know that you will use the same sampling frequency for a while, you can - set it as default using `sounddevice.default.samplerate`: - - .. code:: python - - sd.default.samplerate = fs - - After that, you can drop the *samplerate* argument: - - .. code:: python - - sd.play(myarray) - - Recording - ^^^^^^^^^ - - To record audio data from your sound device into a NumPy array, use - `sounddevice.rec()`: - - .. code:: python - - duration = 10.5 # seconds - myrecording = sd.rec(int(duration * fs), samplerate=fs, channels=2) - - Again, for repeated use you can set defaults using `sounddevice.default`: - - .. code:: python - - sd.default.samplerate = fs - sd.default.channels = 2 - - After that, you can drop the additional arguments: - - .. code:: python - - myrecording = sd.rec(duration * fs) - - This function also returns immediately but continues recording in the - background. In the meantime, you can run other commands. If you want to check - if the recording is finished, you should use `sounddevice.wait()`: - - .. code:: python - - sd.wait() - - If the recording was already finished, this returns immediately; if not, it - waits and returns as soon as the recording is finished. - - Alternatively, you could have used the *blocking* argument in the first place: - - .. code:: python - - myrecording = sd.rec(duration * fs, blocking=True) - - By default, the recorded array has the data type ``'float32'`` (see - `sounddevice.default.dtype`), but this can be changed with the *dtype* argument: - - .. code:: python - - myrecording = sd.rec(duration * fs, dtype='float64') - - Simultaneous Playback and Recording - ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - - To play back an array and record at the same time, use `sounddevice.playrec()`: - - .. code:: python - - myrecording = sd.playrec(myarray, fs, channels=2) - - The number of output channels is obtained from ``myarray``, but the number of - input channels still has to be specified. - - Again, default values can be used: - - .. code:: python - - sd.default.samplerate = fs - sd.default.channels = 2 - myrecording = sd.playrec(myarray) - - In this case the number of output channels is still taken from ``myarray`` - (which may or may not have 2 channels), but the number of input channels is - taken from `sounddevice.default.channels`. - - Device Selection - ^^^^^^^^^^^^^^^^ - - In many cases, the default input/output device(s) will be the one(s) you want, - but it is of course possible to choose a different device. - Use `sounddevice.query_devices()` to get a list of supported devices. - The same list can be obtained from a terminal by typing the command :: - - python3 -m sounddevice - - You can use the corresponding device ID to select a desired device by assigning - to `sounddevice.default.device` or by passing it as *device* argument to - `sounddevice.play()`, `sounddevice.Stream()` etc. - - Instead of the numerical device ID, you can also use a space-separated list of - case-insensitive substrings of the device name (and the host API name, if - needed). See `sounddevice.default.device` for details. - - .. code:: python - - import sounddevice as sd - sd.default.samplerate = 44100 - sd.default.device = 'digital output' - sd.play(myarray) - - Callback Streams - ^^^^^^^^^^^^^^^^ - - Callback "wire" with `sounddevice.Stream`: - - .. code:: python - - import sounddevice as sd - duration = 5.5 # seconds - - def callback(indata, outdata, frames, time, status): - if status: - print(status) - outdata[:] = indata - - with sd.Stream(channels=2, callback=callback): - sd.sleep(int(duration * 1000)) - - Same thing with `sounddevice.RawStream`: - - .. code:: python - - import sounddevice as sd - duration = 5.5 # seconds - - def callback(indata, outdata, frames, time, status): - if status: - print(status) - outdata[:] = indata - - with sd.RawStream(channels=2, dtype='int24', callback=callback): - sd.sleep(int(duration * 1000)) - - .. note:: We are using 24-bit samples here for no particular reason - (just because we can). - - Blocking Read/Write Streams - ^^^^^^^^^^^^^^^^^^^^^^^^^^^ - - Instead of using a callback function, you can also use the blocking methods - `sounddevice.Stream.read()` and `sounddevice.Stream.write()` (and of course the - corresponding methods in `sounddevice.InputStream`, `sounddevice.OutputStream`, - `sounddevice.RawStream`, `sounddevice.RawInputStream` and - `sounddevice.RawOutputStream`). Keywords: sound,audio,PortAudio,play,record,playrec Platform: any diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/sounddevice-0.3.11/sounddevice.egg-info/SOURCES.txt new/sounddevice-0.3.12/sounddevice.egg-info/SOURCES.txt --- old/sounddevice-0.3.11/sounddevice.egg-info/SOURCES.txt 2018-05-07 16:57:08.000000000 +0200 +++ new/sounddevice-0.3.12/sounddevice.egg-info/SOURCES.txt 2018-09-02 11:08:24.000000000 +0200 @@ -3,14 +3,20 @@ MANIFEST.in NEWS.rst README.rst +setup.cfg setup.py sounddevice.py sounddevice_build.py +doc/CONTRIBUTING.rst +doc/api.rst doc/conf.py doc/examples.rst doc/fake__sounddevice.py doc/index.rst +doc/installation.rst doc/requirements.txt +doc/usage.rst +doc/version-history.rst examples/play_file.py examples/play_long_file.py examples/plot_input.py diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/sounddevice-0.3.11/sounddevice.py new/sounddevice-0.3.12/sounddevice.py --- old/sounddevice-0.3.11/sounddevice.py 2018-05-07 16:43:17.000000000 +0200 +++ new/sounddevice-0.3.12/sounddevice.py 2018-09-02 11:03:35.000000000 +0200 @@ -48,7 +48,7 @@ http://python-sounddevice.readthedocs.io/ """ -__version__ = '0.3.11' +__version__ = '0.3.12' import atexit as _atexit import os as _os @@ -62,6 +62,7 @@ for _libname in ( 'portaudio', # Default name on POSIX systems 'bin\\libportaudio-2.dll', # DLL from conda-forge + 'lib/libportaudio.dylib', # dylib from anaconda ): _libname = _find_library(_libname) if _libname is not None:

1 0

commit iwd for openSUSE:Factory
by root 31 Oct '18

31 Oct '18

Hello community, here is the log from the commit of package iwd for openSUSE:Factory checked in at 2018-10-31 13:21:35 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/iwd (Old) and /work/SRC/openSUSE:Factory/.iwd.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "iwd" Wed Oct 31 13:21:35 2018 rev:4 rq:645610 version:0.10 Changes: -------- --- /work/SRC/openSUSE:Factory/iwd/iwd.changes 2018-10-26 11:08:24.365872567 +0200 +++ /work/SRC/openSUSE:Factory/.iwd.new/iwd.changes 2018-10-31 13:22:09.779016948 +0100 @@ -1,0 +2,10 @@ +Tue Oct 23 11:53:55 UTC 2018 - sean(a)suspend.net + +- Update to version 0.10: + * Fix issue with Ethernet authentication packet handling + * Fix issue with ad-hoc network scan results in station mode + * Fix issue with cancellation of ongoing rekey offload + * Add support for setting per-mac GTK credentials + * Add support for using external Embedded Linux library + +------------------------------------------------------------------- Old: ---- iwd-0.9.tar.sign iwd-0.9.tar.xz New: ---- iwd-0.10.tar.sign iwd-0.10.tar.xz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ iwd.spec ++++++ --- /var/tmp/diff_new_pack.wRfVTE/_old 2018-10-31 13:22:10.339016427 +0100 +++ /var/tmp/diff_new_pack.wRfVTE/_new 2018-10-31 13:22:10.339016427 +0100 @@ -17,7 +17,7 @@ Name: iwd -Version: 0.9 +Version: 0.10 Release: 0 Summary: Wireless daemon for Linux License: LGPL-2.1-or-later ++++++ iwd-0.9.tar.xz -> iwd-0.10.tar.xz ++++++ ++++ 4204 lines of diff (skipped)

1 0

commit python-gear for openSUSE:Factory
by root 31 Oct '18

31 Oct '18

Hello community, here is the log from the commit of package python-gear for openSUSE:Factory checked in at 2018-10-31 13:21:29 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/python-gear (Old) and /work/SRC/openSUSE:Factory/.python-gear.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "python-gear" Wed Oct 31 13:21:29 2018 rev:2 rq:645603 version:0.12.0 Changes: -------- --- /work/SRC/openSUSE:Factory/python-gear/python-gear.changes 2018-03-28 10:30:27.771027708 +0200 +++ /work/SRC/openSUSE:Factory/.python-gear.new/python-gear.changes 2018-10-31 13:22:08.555018088 +0100 @@ -1,0 +2,8 @@ +Tue Oct 30 21:44:06 UTC 2018 - Dirk Mueller <dmueller(a)suse.com> + +- update to 0.12.0: + * Add --listen-address flag to geard + * Build universal wheels + * Automatically send GRAB\_JOB after CAN\_DO + +------------------------------------------------------------------- Old: ---- gear-0.11.1.tar.gz New: ---- gear-0.12.0.tar.gz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ python-gear.spec ++++++ --- /var/tmp/diff_new_pack.gwGliE/_old 2018-10-31 13:22:08.943017726 +0100 +++ /var/tmp/diff_new_pack.gwGliE/_new 2018-10-31 13:22:08.947017722 +0100 @@ -12,13 +12,13 @@ # license that conforms to the Open Source Definition (Version 1.9) # published by the Open Source Initiative. -# Please submit bugfixes or comments via http://bugs.opensuse.org/ +# Please submit bugfixes or comments via https://bugs.opensuse.org/ # %{?!python_module:%define python_module() python-%{**} python3-%{**}} Name: python-gear -Version: 0.11.1 +Version: 0.12.0 Release: 0 Summary: Pure Python Async Gear Protocol Library License: Apache-2.0 @@ -58,8 +58,8 @@ %python_uninstall_alternative geard %files %{python_files} -%defattr(-,root,root,-) -%doc README.rst ChangeLog LICENSE AUTHORS +%license LICENSE +%doc README.rst ChangeLog AUTHORS %{python_sitelib}/* %python_alternative %{_bindir}/geard ++++++ gear-0.11.1.tar.gz -> gear-0.12.0.tar.gz ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/gear-0.11.1/ChangeLog new/gear-0.12.0/ChangeLog --- old/gear-0.11.1/ChangeLog 2018-02-01 21:55:58.000000000 +0100 +++ new/gear-0.12.0/ChangeLog 2018-04-19 18:13:52.000000000 +0200 @@ -1,6 +1,13 @@ CHANGES ======= +0.12.0 +------ + +* Add --listen-address flag to geard +* Build universal wheels +* Automatically send GRAB\_JOB after CAN\_DO + 0.11.1 ------ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/gear-0.11.1/PKG-INFO new/gear-0.12.0/PKG-INFO --- old/gear-0.11.1/PKG-INFO 2018-02-01 21:55:59.000000000 +0100 +++ new/gear-0.12.0/PKG-INFO 2018-04-19 18:13:53.000000000 +0200 @@ -1,12 +1,11 @@ Metadata-Version: 1.1 Name: gear -Version: 0.11.1 +Version: 0.12.0 Summary: Pure Python Async Gear Protocol Library Home-page: http://pypi.python.org/pypi/gear Author: OpenStack Author-email: openstack-dev(a)lists.openstack.org License: UNKNOWN -Description-Content-Type: UNKNOWN Description: python-gear =========== @@ -22,3 +21,7 @@ Classifier: License :: OSI Approved :: Apache Software License Classifier: Operating System :: OS Independent Classifier: Programming Language :: Python +Classifier: Programming Language :: Python :: 2 +Classifier: Programming Language :: Python :: 2.7 +Classifier: Programming Language :: Python :: 3 +Classifier: Programming Language :: Python :: 3.5 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/gear-0.11.1/gear/__init__.py new/gear-0.12.0/gear/__init__.py --- old/gear-0.11.1/gear/__init__.py 2018-02-01 21:54:58.000000000 +0100 +++ new/gear-0.12.0/gear/__init__.py 2018-04-19 18:12:43.000000000 +0200 @@ -1897,6 +1897,12 @@ else: self._sendCanDo(name) + connections = self.active_connections[:] + for connection in connections: + if connection.state == "SLEEP": + connection.changeState("IDLE") + self._updateStateMachines() + def unRegisterFunction(self, name): """Remove a function from Gearman's registry. diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/gear-0.11.1/gear/cmd/geard.py new/gear-0.12.0/gear/cmd/geard.py --- old/gear-0.11.1/gear/cmd/geard.py 2018-02-01 21:54:41.000000000 +0100 +++ new/gear-0.12.0/gear/cmd/geard.py 2018-04-19 18:12:43.000000000 +0200 @@ -47,6 +47,9 @@ help='do not run as a daemon') parser.add_argument('-p', dest='port', default=4730, help='port on which to listen') + parser.add_argument('--listen-address', dest='listen_address', + default=None, + help='IP address or domain name to listen on') parser.add_argument('--log-config', dest='log_config', help='logging config file') parser.add_argument('--pidfile', dest='pidfile', @@ -122,6 +125,7 @@ statsd_port, statsd_prefix, acl=acl, + host=self.args.listen_address, keepalive=self.args.keepalive, tcp_keepidle=self.args.tcp_keepidle, tcp_keepintvl=self.args.tcp_keepintvl, diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/gear-0.11.1/gear/tests/test_functional.py new/gear-0.12.0/gear/tests/test_functional.py --- old/gear-0.11.1/gear/tests/test_functional.py 2018-02-01 21:54:41.000000000 +0100 +++ new/gear-0.12.0/gear/tests/test_functional.py 2018-04-19 18:12:43.000000000 +0200 @@ -238,6 +238,36 @@ self.assertTrue(job.complete) self.assertEqual(job.exception, 'work failed') + def test_grab_job_after_register(self): + jobunique = uuid.uuid4().hex + job = gear.TextJob('test', 'testdata', unique=jobunique) + self.client.submitJob(job) + self.assertNotEqual(job.handle, None) + + def getJob(): + workerjob = self.worker.getJob() + workerjob.sendWorkComplete() + + jobthread = threading.Thread(target=getJob) + jobthread.daemon = True + jobthread.start() + + for count in iterate_timeout(30, "worker sleeping"): + if self.worker.active_connections[0].state == 'SLEEP': + break + self.assertEqual(1, len(self.server.normal_queue)) + self.assertFalse(job.complete) + + # When we register the function, the worker should send a + # grab_job packet and pick up the job and it should complete. + self.worker.registerFunction('test') + + for count in iterate_timeout(30, "job completion"): + if job.complete: + break + + self.assertEqual(0, len(self.server.normal_queue)) + def load_tests(loader, in_tests, pattern): return testscenarios.load_tests_apply_scenarios(loader, in_tests, pattern) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/gear-0.11.1/gear.egg-info/PKG-INFO new/gear-0.12.0/gear.egg-info/PKG-INFO --- old/gear-0.11.1/gear.egg-info/PKG-INFO 2018-02-01 21:55:58.000000000 +0100 +++ new/gear-0.12.0/gear.egg-info/PKG-INFO 2018-04-19 18:13:52.000000000 +0200 @@ -1,12 +1,11 @@ Metadata-Version: 1.1 Name: gear -Version: 0.11.1 +Version: 0.12.0 Summary: Pure Python Async Gear Protocol Library Home-page: http://pypi.python.org/pypi/gear Author: OpenStack Author-email: openstack-dev(a)lists.openstack.org License: UNKNOWN -Description-Content-Type: UNKNOWN Description: python-gear =========== @@ -22,3 +21,7 @@ Classifier: License :: OSI Approved :: Apache Software License Classifier: Operating System :: OS Independent Classifier: Programming Language :: Python +Classifier: Programming Language :: Python :: 2 +Classifier: Programming Language :: Python :: 2.7 +Classifier: Programming Language :: Python :: 3 +Classifier: Programming Language :: Python :: 3.5 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/gear-0.11.1/gear.egg-info/pbr.json new/gear-0.12.0/gear.egg-info/pbr.json --- old/gear-0.11.1/gear.egg-info/pbr.json 2018-02-01 21:55:58.000000000 +0100 +++ new/gear-0.12.0/gear.egg-info/pbr.json 2018-04-19 18:13:52.000000000 +0200 @@ -1 +1 @@ -{"git_version": "da802f2", "is_release": true} \ No newline at end of file +{"git_version": "c00ca94", "is_release": true} \ No newline at end of file diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/gear-0.11.1/setup.cfg new/gear-0.12.0/setup.cfg --- old/gear-0.11.1/setup.cfg 2018-02-01 21:55:59.000000000 +0100 +++ new/gear-0.12.0/setup.cfg 2018-04-19 18:13:53.000000000 +0200 @@ -15,6 +15,10 @@ License :: OSI Approved :: Apache Software License Operating System :: OS Independent Programming Language :: Python + Programming Language :: Python :: 2 + Programming Language :: Python :: 2.7 + Programming Language :: Python :: 3 + Programming Language :: Python :: 3.5 [files] packages = @@ -24,6 +28,9 @@ console_scripts = geard = gear.cmd.geard:main +[bdist_wheel] +universal = 1 + [build_sphinx] all_files = 1 build-dir = doc/build

1 0

commit php7-ice for openSUSE:Factory
by root 31 Oct '18

31 Oct '18

Hello community, here is the log from the commit of package php7-ice for openSUSE:Factory checked in at 2018-10-31 13:21:26 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/php7-ice (Old) and /work/SRC/openSUSE:Factory/.php7-ice.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "php7-ice" Wed Oct 31 13:21:26 2018 rev:4 rq:645602 version:1.4.0 Changes: -------- --- /work/SRC/openSUSE:Factory/php7-ice/php7-ice.changes 2018-03-29 11:57:46.069701902 +0200 +++ /work/SRC/openSUSE:Factory/.php7-ice.new/php7-ice.changes 2018-10-31 13:22:06.823019700 +0100 @@ -1,0 +2,40 @@ +Tue Oct 30 07:19:50 UTC 2018 - Mariusz Laczak <mruz(a)poczta.onet.pl> + +- Ice 1.4.0 + * Exception, add a hook for pretty exceptions, fix #234 + * Session, robust start a session + * Pdo, fixed things for different DBMS + * Response, add toJson and toXml + * Db, Model, rename the remove method to delete fix #221 + * Env, add environment helper + * Auth, token enhancement, rename Model driver to Db + * Router, refactor, rename old router to FastRouter + * Auth, password hash enhancement + * Di, hook bug fixed #208 + * Model, clear save status #205 + * Pdo, add query method fix #166 + * Model, fixed retry to save invalid model bug #202 + * Cli, add websocket component #201 + * Auth, make model classes in users configurable #199 + * Request, allow for empty string on get, post #197 + * Model, enhanced and bugs fix #185 + * Pdo, make it competitable with other dbms #188 + * Di, resolve bug fix #190 + * View, allow to render file with specific engine + * Tests, add db and model tests + * Dispatcher, add reset + * Always return this from setters + * Response, send file + * App, add new module to the app + * App, allow to render page without main layout fix #169 + * Response, set response content in controller fail fix #168 + * Request, implement interface + * Config, load config from php file + * PHP, fix declaration errors + * Travis, update to xenial dist + * Composer, use zephir v0.11.0 and zephir-parser v1.1.2 + * View, stop finding view when it meets the right engine and file + * Modules, use loader from di and pass it to autoloaders fix #156 + * Loader, no namespace classes loading for the loader fix #154 + +------------------------------------------------------------------- Old: ---- ice-1.3.0.tar.gz New: ---- ice-1.4.0.tar.gz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ php7-ice.spec ++++++ --- /var/tmp/diff_new_pack.J2DItJ/_old 2018-10-31 13:22:07.831018762 +0100 +++ /var/tmp/diff_new_pack.J2DItJ/_new 2018-10-31 13:22:07.843018751 +0100 @@ -22,7 +22,7 @@ %define _name ice Name: %{_php}-%{_name} -Version: 1.3.0 +Version: 1.4.0 Release: 0 Summary: PHP framework delivered as C extension License: BSD-3-Clause ++++++ ice-1.3.0.tar.gz -> ice-1.4.0.tar.gz ++++++ ++++ 53393 lines of diff (skipped) ++++++ ice-notime.diff ++++++ --- /var/tmp/diff_new_pack.J2DItJ/_old 2018-10-31 13:22:08.219018401 +0100 +++ /var/tmp/diff_new_pack.J2DItJ/_new 2018-10-31 13:22:08.223018397 +0100 @@ -3,10 +3,10 @@ build/php7/ice.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) -Index: framework-1.1.3/build/php5/ice.c +Index: framework-1.4.0/build/php5/ice.c =================================================================== ---- framework-1.1.3.orig/build/php5/ice.c -+++ framework-1.1.3/build/php5/ice.c +--- framework-1.4.0.orig/build/php5/ice.c ++++ framework-1.4.0/build/php5/ice.c @@ -352,7 +352,7 @@ static PHP_MINFO_FUNCTION(ice) php_info_print_table_header(2, PHP_ICE_NAME, "enabled"); php_info_print_table_row(2, "Author", PHP_ICE_AUTHOR); @@ -15,11 +15,11 @@ + php_info_print_table_row(2, "Build Date", ""); php_info_print_table_row(2, "Powered by Zephir", "Version " PHP_ICE_ZEPVERSION); php_info_print_table_end(); - php_info_print_table_start(); -Index: framework-1.1.3/build/php7/ice.c + php_info_print_table_start(); +Index: framework-1.4.0/build/php7/ice.c =================================================================== ---- framework-1.1.3.orig/build/php7/ice.c -+++ framework-1.1.3/build/php7/ice.c +--- framework-1.4.0.orig/build/php7/ice.c ++++ framework-1.4.0/build/php7/ice.c @@ -327,7 +327,7 @@ static PHP_MINFO_FUNCTION(ice) php_info_print_table_header(2, PHP_ICE_NAME, "enabled"); php_info_print_table_row(2, "Author", PHP_ICE_AUTHOR); @@ -28,4 +28,4 @@ + php_info_print_table_row(2, "Build Date", ""); php_info_print_table_row(2, "Powered by Zephir", "Version " PHP_ICE_ZEPVERSION); php_info_print_table_end(); - php_info_print_table_start(); + php_info_print_table_start();

1 0

commit apache-commons-cli for openSUSE:Factory
by root 31 Oct '18

31 Oct '18

Hello community, here is the log from the commit of package apache-commons-cli for openSUSE:Factory checked in at 2018-10-31 13:21:19 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/apache-commons-cli (Old) and /work/SRC/openSUSE:Factory/.apache-commons-cli.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "apache-commons-cli" Wed Oct 31 13:21:19 2018 rev:10 rq:645582 version:1.4 Changes: -------- --- /work/SRC/openSUSE:Factory/apache-commons-cli/apache-commons-cli.changes 2018-07-07 21:58:03.615343372 +0200 +++ /work/SRC/openSUSE:Factory/.apache-commons-cli.new/apache-commons-cli.changes 2018-10-31 13:22:05.331021089 +0100 @@ -1,0 +2,10 @@ +Tue Oct 23 17:55:39 UTC 2018 - Fridrich Strba <fstrba(a)suse.com> + +- Upgrade to version 1.4 +- Modify the build.xml.tar.bz2 to build with source/target 8 and + adapt for the commons-cli-1.4 +- Modified patch: + * commons-cli-1.2-jdk9.patch -> commons-cli-1.4-jdk9.patch + + Rediff the remaining hunk to the changed context of pom.xml + +------------------------------------------------------------------- Old: ---- commons-cli-1.2-jdk9.patch commons-cli-1.2-src.tar.gz New: ---- commons-cli-1.4-jdk9.patch commons-cli-1.4-src.tar.gz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ apache-commons-cli.spec ++++++ --- /var/tmp/diff_new_pack.t3sMAe/_old 2018-10-31 13:22:06.191020289 +0100 +++ /var/tmp/diff_new_pack.t3sMAe/_new 2018-10-31 13:22:06.195020285 +0100 @@ -12,14 +12,14 @@ # license that conforms to the Open Source Definition (Version 1.9) # published by the Open Source Initiative. -# Please submit bugfixes or comments via http://bugs.opensuse.org/ +# Please submit bugfixes or comments via https://bugs.opensuse.org/ # %global base_name cli %global short_name commons-%{base_name} Name: apache-commons-cli -Version: 1.2 +Version: 1.4 Release: 0 Summary: Command Line Interface Library for Java License: Apache-2.0 @@ -27,7 +27,7 @@ Url: http://commons.apache.org/%{base_name}/ Source0: http://www.apache.org/dist/commons/%{base_name}/source/%{short_name}-%{vers… Source1: build.xml.tar.bz2 -Patch0: commons-cli-1.2-jdk9.patch +Patch0: commons-cli-1.4-jdk9.patch BuildRoot: %{_tmppath}/%{name}-%{version}-build BuildArch: noarch BuildRequires: ant @@ -39,8 +39,7 @@ Provides: jakarta-%{short_name} = %{version}-%{release} Obsoletes: jakarta-%{short_name} < %{version} Provides: apache-cli = %{version} -Provides: java(commons-cli:commons-cli) = %{version} -Obsoletes: apache-cli < 1.2 +Obsoletes: apache-cli < %{version} %description The CLI library provides a simple and easy to use API for working with the @@ -70,14 +69,14 @@ %install # jars -install -Dpm 644 target/%{short_name}-%{version}.jar %{buildroot}%{_javadir}/%{name}-%{version}.jar -(cd %{buildroot}%{_javadir} && for jar in *-%{version}*; do ln -sf ${jar} `echo $jar| sed "s|apache-||g"`; done) -(cd %{buildroot}%{_javadir} && for jar in *-%{version}*; do ln -sf ${jar} `echo $jar| sed "s|-%{version}||g"`; done) +install -Dpm 644 target/%{short_name}-%{version}.jar %{buildroot}%{_javadir}/%{short_name}-%{version}.jar +(cd %{buildroot}%{_javadir} && for jar in *-%{version}*.jar; do ln -sf ${jar} apache-${jar}; done) +(cd %{buildroot}%{_javadir} && for jar in *-%{version}*.jar; do ln -sf ${jar} `echo $jar| sed "s|-%{version}||g"`; done) # pom install -d -m 755 %{buildroot}%{_mavenpomdir} -install -pm 644 pom.xml %{buildroot}%{_mavenpomdir}/JPP-%{short_name}.pom -%add_maven_depmap JPP-%{short_name}.pom %{short_name}.jar +install -pm 644 pom.xml %{buildroot}%{_mavenpomdir}/%{short_name}-%{version}.pom +%add_maven_depmap %{short_name}-%{version}.pom %{short_name}-%{version}.jar -a "org.apache.commons:%{short_name}" # javadoc install -d -m 0755 %{buildroot}%{_javadocdir}/%{name}-%{version} @@ -87,7 +86,7 @@ %files %defattr(-,root,root) -%doc LICENSE.txt NOTICE.txt README.txt RELEASE-NOTES.txt +%doc LICENSE.txt NOTICE.txt README.md RELEASE-NOTES.txt CONTRIBUTING.md %{_javadir}/* %{_mavenpomdir}/* %if %{defined _maven_repository} ++++++ build.xml.tar.bz2 ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/maven-build.properties new/maven-build.properties --- old/maven-build.properties 2011-02-02 07:35:00.000000000 +0100 +++ new/maven-build.properties 2018-10-23 19:49:46.104236136 +0200 @@ -2,33 +2,33 @@ #Tue Feb 01 23:35:00 MST 2011 commons.manifestfile=target/osgi/MANIFEST.MF maven.settings.offline=true -maven.compile.target=1.4 -maven.build.finalName=commons-cli-1.2 -commons.release.name=commons-cli-1.2 +maven.compile.target=8 +maven.build.finalName=commons-cli-1.4 +commons.release.name=commons-cli-1.4 maven.build.resourceDir.0=. maven.build.testOutputDir=${maven.build.dir}/test-classes maven.build.testResourceDir.0=src/test/resources maven.reporting.outputDirectory=${maven.build.dir}/site commons.docEncoding=iso-8859-1 -maven.build.srcDir.0=src/java +maven.build.srcDir.0=src/main/java project.build.directory=${maven.build.dir} maven.test.reports=${maven.build.dir}/test-reports commons.binary.suffix= commons.jira.pid=12310463 maven.build.dir=target -commons.release.version=1.2 +commons.release.version=1.4 project.build.outputDirectory=${maven.build.outputDir} commons.osgi.import=* commons.encoding=iso-8859-1 commons.osgi.symbolicName=org.apache.commons.cli -maven.compile.source=1.4 +maven.compile.source=8 organization.logo=http\://www.apache.org/images/asf_logo_wide.gif commons.osgi.dynamicImport= -maven.build.testDir.0=src/test +maven.build.testDir.0=src/test/java maven.settings.interactiveMode=true commons.rc.version=RC7 commons.osgi.private= -commons.osgi.export=org.apache.commons.*;version\=1.2 +commons.osgi.export=org.apache.commons.*;version\=1.4 maven.repo.local=${user.home}/.m2/repository commons.componentid=cli commons.deployment.protocol=scp diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/maven-build.xml new/maven-build.xml --- old/maven-build.xml 2011-07-19 12:06:55.000000000 +0200 +++ new/maven-build.xml 2018-10-23 19:45:57.219015354 +0200 @@ -24,13 +24,13 @@ <property file="${user.home}/.m2/maven.properties"/> <property file="maven-build.properties"/> - <property name="maven.build.finalName" value="commons-cli-1.2"/> + <property name="maven.build.finalName" value="commons-cli-1.4"/> <property name="maven.build.dir" value="target"/> <property name="maven.build.outputDir" value="${maven.build.dir}/classes"/> - <property name="maven.build.srcDir.0" value="src/java"/> + <property name="maven.build.srcDir.0" value="src/main/java"/> <property name="maven.build.resourceDir.0" value="."/> <property name="maven.build.testOutputDir" value="${maven.build.dir}/test-classes"/> - <property name="maven.build.testDir.0" value="src/test"/> + <property name="maven.build.testDir.0" value="src/test/java"/> <property name="maven.build.testResourceDir.0" value="src/test/resources"/> <property name="maven.test.reports" value="${maven.build.dir}/test-reports"/> <property name="maven.reporting.outputDirectory" value="${maven.build.dir}/site"/> @@ -68,10 +68,10 @@ debug="true" optimize="false" deprecation="true" - target="1.4" + target="8" verbose="false" fork="false" - source="1.4"> + source="8"> <src> <pathelement location="${maven.build.srcDir.0}"/> </src> @@ -101,10 +101,10 @@ debug="true" optimize="false" deprecation="true" - target="1.4" + target="8" verbose="false" fork="false" - source="1.4"> + source="8"> <src> <pathelement location="${maven.build.testDir.0}"/> </src> @@ -202,7 +202,7 @@ nonavbar="false" serialwarn="false" charset="ISO-8859-1" - source="1.4" + source="8" linksource="true" breakiterator="false"> <link href="http://java.sun.com/javase/6/docs/api/"/> ++++++ commons-cli-1.2-jdk9.patch -> commons-cli-1.4-jdk9.patch ++++++ --- /work/SRC/openSUSE:Factory/apache-commons-cli/commons-cli-1.2-jdk9.patch 2018-07-07 21:58:03.791343149 +0200 +++ /work/SRC/openSUSE:Factory/.apache-commons-cli.new/commons-cli-1.4-jdk9.patch 2018-10-31 13:22:05.363021060 +0100 @@ -1,70 +1,13 @@ ---- commons-cli-1.2-src/maven-build.properties 2017-09-14 11:28:42.076085832 +0200 -+++ commons-cli-1.2-src/maven-build.properties 2017-09-14 11:30:28.515332100 +0200 -@@ -2,7 +2,7 @@ - #Tue Feb 01 23:35:00 MST 2011 - commons.manifestfile=target/osgi/MANIFEST.MF - maven.settings.offline=true --maven.compile.target=1.4 -+maven.compile.target=8 - maven.build.finalName=commons-cli-1.2 - commons.release.name=commons-cli-1.2 - maven.build.resourceDir.0=. -@@ -21,7 +21,7 @@ - commons.osgi.import=* - commons.encoding=iso-8859-1 - commons.osgi.symbolicName=org.apache.commons.cli --maven.compile.source=1.4 -+maven.compile.source=8 - organization.logo=http\://www.apache.org/images/asf_logo_wide.gif - commons.osgi.dynamicImport= - maven.build.testDir.0=src/test ---- commons-cli-1.2-src/maven-build.xml 2017-09-14 11:28:42.076085832 +0200 -+++ commons-cli-1.2-src/maven-build.xml 2017-09-14 11:30:13.055332041 +0200 -@@ -68,10 +68,10 @@ - debug="true" - optimize="false" - deprecation="true" -- target="1.4" -+ target="8" - verbose="false" - fork="false" -- source="1.4"> -+ source="8"> - <src> - <pathelement location="${maven.build.srcDir.0}"/> - </src> -@@ -101,10 +101,10 @@ - debug="true" - optimize="false" - deprecation="true" -- target="1.4" -+ target="8" - verbose="false" - fork="false" -- source="1.4"> -+ source="8"> - <src> - <pathelement location="${maven.build.testDir.0}"/> - </src> -@@ -202,7 +202,7 @@ - nonavbar="false" - serialwarn="false" - charset="ISO-8859-1" -- source="1.4" -+ source="8" - linksource="true" - breakiterator="false"> - <link href="http://java.sun.com/javase/6/docs/api/"/> ---- commons-cli-1.2-src/pom.xml 2017-09-14 11:28:42.076085832 +0200 -+++ commons-cli-1.2-src/pom.xml 2017-09-14 11:30:04.343332008 +0200 -@@ -128,8 +128,8 @@ +--- commons-cli-1.4-src/pom.xml 2017-03-09 13:59:23.000000000 +0100 ++++ commons-cli-1.4-src/pom.xml 2018-10-23 19:42:13.605822641 +0200 +@@ -163,8 +163,8 @@ </dependencies> <properties> -- <maven.compile.source>1.4</maven.compile.source> -- <maven.compile.target>1.4</maven.compile.target> -+ <maven.compile.source>8</maven.compile.source> -+ <maven.compile.target>8</maven.compile.target> +- <maven.compiler.source>1.5</maven.compiler.source> +- <maven.compiler.target>1.5</maven.compiler.target> ++ <maven.compiler.source>8</maven.compiler.source> ++ <maven.compiler.target>8</maven.compiler.target> <commons.componentid>cli</commons.componentid> - <commons.release.version>1.2</commons.release.version> + <commons.release.version>1.4</commons.release.version> <commons.release.name>commons-cli-${commons.release.version}</commons.release.name> ++++++ commons-cli-1.2-src.tar.gz -> commons-cli-1.4-src.tar.gz ++++++ ++++ 24852 lines of diff (skipped)

1 0