April 2020 - openSUSE Build Service - openSUSE Mailing Lists

[opensuse-buildservice] Install package in distro chroot?
by Kyle Edwards 01 May '20

01 May '20

Hi all, I'm setting up an internal OBS instance that builds packages for Ubuntu 16.04, and I'm wondering: is there a way to pre-emptively install a package in the chroot before installing the package's build dependencies? I would like to unconditionally install the pkg-create- dbgsym package when building for Ubuntu 16.04. Kyle -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

4 6

[opensuse-buildservice] repotype rpm-md with deltas
by Damian Ivanov 28 Apr '20

28 Apr '20

Hello, I am trying to figure out the correct syntax, the guide I found doesn't clearly state it / show an example. Maybe I have already found the correct one but sometimes changing this value breaks the scheduler on my local obs, sometimes other quirks and it may not have had recovered, if one of the following was to be correct: Repotype: prestodelta splitdebug:-debuginfo #Repotype: rpm-md options:prestodelta splitdebug:-debuginfo #Repotype: rpm-md options:prestodelta splitdebug:-debuginfo #Repotype: rpm-md options:-prestodelta splitdebug:-debuginfo #Repotype: rpm-md:-prestodelta splitdebug:-debuginfo #Repotype: rpm-md[:prestodelta] splitdebug:-debuginfo #Repotype: rpm-md[prestodelta] splitdebug:-debuginfo #Repotype: rpm-md:prestodelta splitdebug:-debuginfo I'd appreciate if you can point me to which syntax is correct. Thanks, Damian -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 0

[opensuse-buildservice] z/VM Worker for OBS
by Berthold Gunreben 28 Apr '20

28 Apr '20

Hi, I am currently working on updating the OBS z/VM Worker implementation. Currently, package building works without issues, but container building fails. The reason seems to be that I do have a mismatch between installed and running kernel. In the original implementation, the system just takes the kernel image from the controlling guest to make the actual builder bootable. However, this typically is not kernel-obs-build. Now, the kernel-obs-build package does not provide the image file below /boot/image to make the system bootable via the s390x bootloader zipl. Therefore, I am a bit stuck and don't exactly know how to proceed. There are several possibilities, and I would like to hear what would be a preferred solution: 1. Add the image file to kernel-obs-build for s390x. This would allow me to just use the provided image file to make the target disk bootable. 2. Setup the two stage bootprocess with grub and do a kexec boot during the build process to reboot the worker with the current kernel. 3. Boot the worker over the reader. In that case I would not need zipl and kernel-obs-build would be sufficient to boot. This is similar to booting for Installation. 4. ??? I have no idea what else could be done. Maybe you have some suggestion. Any suggestions are welcome. Thanks Berthold (azouhr(a)opensuse.org) -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 1

[opensuse-buildservice] Qactus 2.0.0 is out!
by Javier Llorente 24 Apr '20

24 Apr '20

Hello everyone, Qactus 2.0.0 has been released! This version comes with a much improved OBS browser and revamped UI; there are more actions available for projects/packages such as submit, copy, link and properties. Please take into account that the MetaConfigEditor (edit package/ project) is in beta, so use it with care. http://www.javierllorente.com/2020/04/20/qactus-v2-0-0-is-out/ Greetings, -- Javier Llorente

3 6

[opensuse-buildservice] Way to ignore errors
by Damian Ivanov 24 Apr '20

24 Apr '20

Hi, Is there a way to ignore this error and continue with build, may sound strange but the link targets don't exist on purpose and no rpm will provide them. >>ERROR: link target doesn't exist (neither in build root nor in installed system): Thanks in advance, Damian -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 4

[opensuse-buildservice] Fedora 32 in OBS
by Neal Gompa 24 Apr '20

24 Apr '20

Hey all, Can we get Fedora 32 added? Fedora 32 GA is next Tuesday[1]. [1]: https://meetbot.fedoraproject.org/fedora-meeting-1/2020-04-23/f32-final-go_… -- 真実はいつも一つ！/ Always, there's only one truth! -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 1

[opensuse-buildservice] systemd-nspawn -D obs_server
by Damian Ivanov 21 Apr '20

21 Apr '20

Hi, I am trying to setup a new tumbleweed_into_dir, install obs and run it as nspawn container, using the OBS:/Server:/Unstable/openSUSE_Factory repo So far it works except that signing fails and building for anything that requires make. At the end of the email you will find the commands used to setup everything so far. I would like to know if someone has a suggestion how to fix build and signing issue. The build process log show various /dev/null permission denied and someObsDir/dev/loopback's mknod failed Adding --property='DevicePolicy=auto' to nspawn command which should allow all devices, had no effect, although I am not absolutely sure if this isn't ignore because of another conf file somewhere. mkdir obs_server && cd obs_server sudo mkdir -p sys proc dev etc/zypp/repos.d sudo mount -t proc proc proc/ sudo mount -o bind /sys sys/ sudo mount -o bind /dev dev/ sudo zypper --no-gpg-checks --non-interactive --cache-dir /var/cache/zypp --root obs_server in --allow-unsigned-rpm --auto-agree-with-licenses filesystem bash permissions sudo zypper --no-gpg-checks --non-interactive --cache-dir /var/cache/zypp --root obs_server in --allow-unsigned-rpm --auto-agree-with-licenses filesystem bash bash-completion cpio coreutils glibc permissions systemd systemd-rpm-macros systemd-presets-branding-openSUSE distribution-logos-Novos rpm zypper nano system-group-wheel system-group-hardware system-user-bin system-user-root system-user-nobody sudo systemd-network yast2-network NetworkManager nmcli-dmenu mariadb systemd-container sudo zypper --no-gpg-checks --non-interactive --cache-dir /var/cache/zypp --root obs_server in --allow-unsigned-rpm --replacefiles --auto-agree-with-licenses -t pattern OBS_Server #bind later by nspawn must be removed sudo rm obs_server/etc/resolv.conf sudo umount -l proc sudo umount -l dev sudo umount -l sys #boot it sudo systemd-nspawn -D /path/to/obs -b --resolv-conf=bind-host --capability=all #from another console sudo machinectl --machine obs_server shell #run it and ignore all errors for now # at hostname give it localhost /usr/lib/obs/server/setup-appliance.sh --force #required? /etc/sign.conf add allow localhost allow localhost.localdomain #below is required on every container boot at the moment #/run is a temp overlay into the container mkdir -p /run/mysql/ /run/passenger/ && chmod -R 777 /run/mysql/ #chown -R mysql:mysql /run/mysql fails - no such group mysql though it exist #private-users=pick --private-users-chown for systemd-nspawn may fix this #but on opensuse these two break nspawn-boot systemctl restart mariadb systemctl restart apache2 on the host you can open the web broweser and go to 127.0.0.1 Regards, Damian -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 0

[opensuse-buildservice] outdated wiki: https://en.opensuse.org/openSUSE:Build_Service_Signer
by Hans-Peter Jansen 21 Apr '20

21 Apr '20

Hi, since I fought with a new local OBS setup for the last two days, it's time to fix the bouquet of misleading/dead wrong signer guide on the wiki. (No, the signer wasn't the reason for the fight. That was /usr/sbin/obsstoragesetup. But that's a different story..). Before I start to fix the wiki, can we agree on a couple of facts beforehand? Section: Required Packages I think, it's save to remove all paragraphs after the item enumeration. Section: Set up the GPG key I would remove: Some programs[which?] cannot handle DSA 2048, so if you are actually affected, you may want to limit yourself to a 1024 bit-DSA key instead. Section: Prep the signer Phrases go to /srv/obs/gnupg<fullstop> The symlink is unnecessary. Section: Configure the signer For the appliance at least, the key *have* to be in /srv/obs/obs-default- gpg.asc. Contraventions will be punished by prolonged troubleshooting, that will likely end in /usr/lib/obs/server/setup-appliance.sh function prepare_obssigner... A further note for sign_project is advised (and relocated from troubleshooting section). Outdated: If you run a version older than obs-signd-2.1.2 where /etc/permissions.d/sign is missing, create this file and add to it: /usr/bin/sign root:obsrun 4750 Run SuSEconfig --module permissions after having created this file. Remove? Section: Activate the Signer We arrived in systemd age. Section: Signing EFI binaries/kernel modules for EFI Secure Boot and below: out of my capabilities. Comments please. Cheers, Pete -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

4 22

[opensuse-buildservice] vdvdv
by Michael Pujos 20 Apr '20

20 Apr '20

vdvfdv -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 0

[opensuse-buildservice] Suggestion: private repositories (paid!)
by Damian Ivanov 20 Apr '20

20 Apr '20

Hi, I would like to see something similar to https://github.com/pricing with private repositories in obs. It seems there is even some code that should do that from packmans obs instance. [ ] Hide the entire project [ ] Deny access to sources of project I imagine that there could be others interested who do not wish do have their own obs instance but use an already hosted obs to build for Linux distributions (maybe more). My 2 Pfennigs, Damian -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 2