Script 'mail_helper' called by ro Hello packager, This is just FYI. Your package was checked in in distribution "sle12" by autobuild-member: ro. Here comes the log... ---------------------------%<------------------------------ Hi, here is the log from ci_new_pac /mounts/work_src_done/SLE12/yast2-cluster -> sle12 ## BNC# 883228 : "[Test Case 1394899] Various issues with YaST cluster help" (ASSIGNED/) ## BNC# 885113 : "Progress message show "Read global settings, Read..." when finish setting of yast2 cluster" (ASSIGNED/) Changes: -------- --- /work/SRC/SUSE:SLE-12:GA/yast2-cluster/yast2-cluster.changes 2014-06-26 15:59:44.000000000 +0200 +++ /mounts/work_src_done/SLE12/yast2-cluster/yast2-cluster.changes 2014-07-01 10:08:45.000000000 +0200 @@ -1,0 +2,7 @@ +Tue Jul 1 06:53:46 UTC 2014 - nwang@suse.com + +- BNC#883228 and BNC#885113. Fix various issues with YaST + Cluster help and the finish progress message. +- Version 3.1.10 + +------------------------------------------------------------------- calling whatdependson for sle12-i586 Packages directly triggered for rebuild: - yast2-cluster ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/SUSE:SLE-12:GA/yast2-cluster (Old) and /mounts/work_src_done/SLE12/yast2-cluster (BS:build ID:40239 MAIL:yast-commit@opensuse.org) (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "yast2-cluster", Maintainer is "yast-commit@opensuse.org" Old: ---- yast2-cluster-3.1.9.tar.bz2 New: ---- yast2-cluster-3.1.10.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ yast2-cluster.spec ++++++ --- /var/tmp/diff_new_pack.Q6AbMV/_old 2014-07-01 13:08:51.000000000 +0200 +++ /var/tmp/diff_new_pack.Q6AbMV/_new 2014-07-01 13:08:51.000000000 +0200 @@ -18,7 +18,7 @@ Name: yast2-cluster %define _fwdefdir /etc/sysconfig/SuSEfirewall2.d/services -Version: 3.1.9 +Version: 3.1.10 Release: 0 BuildRoot: %{_tmppath}/%{name}-%{version}-build ++++++ yast2-cluster-3.1.9.tar.bz2 -> yast2-cluster-3.1.10.tar.bz2 ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-cluster-3.1.9/package/yast2-cluster.changes new/yast2-cluster-3.1.10/package/yast2-cluster.changes --- old/yast2-cluster-3.1.9/package/yast2-cluster.changes 2014-06-22 09:25:55.000000000 +0200 +++ new/yast2-cluster-3.1.10/package/yast2-cluster.changes 2014-07-01 10:05:03.000000000 +0200 @@ -1,4 +1,11 @@ ------------------------------------------------------------------- +Tue Jul 1 06:53:46 UTC 2014 - nwang@suse.com + +- BNC#883228 and BNC#885113. Fix various issues with YaST + Cluster help and the finish progress message. +- Version 3.1.10 + +------------------------------------------------------------------- Sun Jun 22 07:08:43 UTC 2014 - nwang@suse.com - BNC#883235. Auot enable "two_node" when using two node cluster. diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-cluster-3.1.9/package/yast2-cluster.spec new/yast2-cluster-3.1.10/package/yast2-cluster.spec --- old/yast2-cluster-3.1.9/package/yast2-cluster.spec 2014-06-22 09:25:55.000000000 +0200 +++ new/yast2-cluster-3.1.10/package/yast2-cluster.spec 2014-07-01 10:05:03.000000000 +0200 @@ -18,7 +18,7 @@ Name: yast2-cluster %define _fwdefdir /etc/sysconfig/SuSEfirewall2.d/services -Version: 3.1.9 +Version: 3.1.10 Release: 0 BuildRoot: %{_tmppath}/%{name}-%{version}-build diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-cluster-3.1.9/src/include/cluster/dialogs.rb new/yast2-cluster-3.1.10/src/include/cluster/dialogs.rb --- old/yast2-cluster-3.1.9/src/include/cluster/dialogs.rb 2014-06-22 09:25:55.000000000 +0200 +++ new/yast2-cluster-3.1.10/src/include/cluster/dialogs.rb 2014-07-01 10:05:03.000000000 +0200 @@ -217,7 +217,7 @@ else #BNC#880242, expected_votes must have value when "udp" if UI.QueryWidget(Id(:expected_votes), :Value) == "" - Popup.Message("The expected votes has to be fulfilled when udp") + Popup.Message("The Expected Votes has to be fulfilled when udp is configured") UI.SetFocus(:expected_votes) return false end @@ -478,7 +478,7 @@ nid = VBox( HBox( Left(InputField(Id(:cluster_name),Opt(:hstretch), _("Cluster Name:"))), - Left(InputField(Id(:expected_votes),Opt(:hstretch), _("expected votes:"),"")), + Left(InputField(Id(:expected_votes),Opt(:hstretch), _("Expected Votes:"),"")), ComboBox( Id(:rrpmode), Opt(:hstretch), @@ -735,7 +735,7 @@ VSpacing(1), Label( _( - "For newly created cluster, push the button below to generate /etc/corosync/authkey." + "For a newly created cluster, push the button below to generate /etc/corosync/authkey." ) ), Label( diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-cluster-3.1.9/src/include/cluster/helps.rb new/yast2-cluster-3.1.10/src/include/cluster/helps.rb --- old/yast2-cluster-3.1.9/src/include/cluster/helps.rb 2014-06-22 09:25:55.000000000 +0200 +++ new/yast2-cluster-3.1.10/src/include/cluster/helps.rb 2014-07-01 10:05:03.000000000 +0200 @@ -38,7 +38,9 @@ "<p><b><big>Port</big></b><br>This specifies the UDP port number. It is possible to use the same multicast address on a network with the openais services configured for different UDP ports.<br></p>\n" + "<p><b><big>Member Address</big></b><br>This list specifies all the nodes in the cluster by IP address. This could be configurable when using udpu <br></p>\n" + "<p><b><big>Node ID</big></b><br>This configuration option is optional when using IPv4 and required when using IPv6. This is a 32 bit value specifying the node identifier delivered to the cluster membership service. If this is not specified with IPv4, the node id will be determined from the 32 bit IP address the system to which the system is bound with ring identifier of 0. The node identifier value of zero is reserved and should not be used.<br></p>\n" + - "<p><b><big>rrp_mode</big></b><br>This specifies the mode of redundant ring, which may be none, active, or passive. Active replication offers slightly lower latency from transmit to delivery in faulty network environments but with less performance. Passive replication may nearly double the speed of the totem protocol if the protocol doesn't become cpu bound. The final option is none, in which case only one network interface will be used to operate the totem protocol. If only one interface directive is specified, none is automatically chosen. If multiple interface directives are specified, only active or passive may be chosen.<br></p>\n" + "<p><b><big>rrp_mode</big></b><br>This specifies the mode of redundant ring, which may be none, active, or passive. Active replication offers slightly lower latency from transmit to delivery in faulty network environments but with less performance. Passive replication may nearly double the speed of the totem protocol if the protocol doesn't become cpu bound. The final option is none, in which case only one network interface will be used to operate the totem protocol. If only one interface directive is specified, none is automatically chosen. If multiple interface directives are specified, only active or passive may be chosen.<br></p>\n" + + "<p><b><big>Expected votes</big></b><br>Expect vote number for voting quorum. Will be automatically calculated when the nodelist {} section is present in corosync.conf or can be specified in the quorum {} section.<br></p>\n" + + "<p><b><big>Auto Generate Node ID</big></b><br>Nodeid is required when using IPv6. Auto node ID enabled will generate nodeid automatically.<br></p>\n" ), "security" => _( "\n" + @@ -47,7 +49,8 @@ ), "service" => _( "\n" + - "\t\t\t<p><b><big>Booting</big></b><br>Starting openais service during boot or not</p>\n" + + "\t\t\t<p><b><big>Booting</big></b><br>Starting corosync service during boot or not</p>\n" + + "\t\t\t<p><b><big>Firewall Settings</big></b><br>Enable the port when Firewall is enabled</p>\n" + "\t\t\t" ), "csync2" => _( diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-cluster-3.1.9/src/include/cluster/wizards.rb new/yast2-cluster-3.1.10/src/include/cluster/wizards.rb --- old/yast2-cluster-3.1.9/src/include/cluster/wizards.rb 2014-06-22 09:25:55.000000000 +0200 +++ new/yast2-cluster-3.1.10/src/include/cluster/wizards.rb 2014-07-01 10:05:03.000000000 +0200 @@ -87,8 +87,8 @@ else UI.WizardCommand(term(:SetNextButtonLabel, Label.FinishButton)) UI.WizardCommand(term(:SetAbortButtonLabel, Label.CancelButton)) - Wizard.HideBackButton end + Wizard.HideBackButton Wizard.SelectTreeItem(Ops.get_string(sequence, "ws_start", "")) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-cluster-3.1.9/src/modules/Cluster.rb new/yast2-cluster-3.1.10/src/modules/Cluster.rb --- old/yast2-cluster-3.1.9/src/modules/Cluster.rb 2014-06-22 09:25:55.000000000 +0200 +++ new/yast2-cluster-3.1.10/src/modules/Cluster.rb 2014-07-01 10:05:03.000000000 +0200 @@ -490,6 +490,7 @@ Builtins.sleep(sl) return false if Abort() + Progress.Finish @modified = false true end @@ -504,7 +505,6 @@ steps = 2 sl = 500 - Builtins.sleep(sl) # TODO FIXME Names of real stages # We do not set help text here, because it was set outside @@ -605,6 +605,7 @@ end return false if Abort() + Progress.Finish true end continue with "q"... Checked in at Tue Jul 1 13:09:18 CEST 2014 by ro Remember to have fun... -- To unsubscribe, e-mail: yast-commit+unsubscribe@opensuse.org For additional commands, e-mail: yast-commit+help@opensuse.org