Mailinglist Archive: yast-commit (518 mails)

< Previous

Next >

Author: jsmeix
Date: Fri Apr 24 12:33:14 2009
New Revision: 56961

URL: http://svn.opensuse.org/viewcvs/yast?rev=56961&view=rev
Log:

- Fixed the Connection Wizard which now checks for each connection
which is not natively supported by CUPS if the RPM package
which provides the matching CUPS backend is installed.
- 2.18.14

Modified:
trunk/printer/VERSION
trunk/printer/package/yast2-printer.changes
trunk/printer/src/connectionwizard.ycp
trunk/printer/src/helps.ycp

Modified: trunk/printer/VERSION
URL:
http://svn.opensuse.org/viewcvs/yast/trunk/printer/VERSION?rev=56961&r1=56960&r2=56961&view=diff
==============================================================================
--- trunk/printer/VERSION (original)
+++ trunk/printer/VERSION Fri Apr 24 12:33:14 2009
@@ -1 +1 @@
-2.18.13
+2.18.14

Modified: trunk/printer/package/yast2-printer.changes
URL:
http://svn.opensuse.org/viewcvs/yast/trunk/printer/package/yast2-printer.changes?rev=56961&r1=56960&r2=56961&view=diff
==============================================================================
--- trunk/printer/package/yast2-printer.changes (original)
+++ trunk/printer/package/yast2-printer.changes Fri Apr 24 12:33:14 2009
@@ -1,4 +1,12 @@
-------------------------------------------------------------------
+Fri Apr 24 10:42:09 CEST 2009 - jsmeix@xxxxxxx
+
+- Fixed the Connection Wizard which now checks for each connection
+ which is not natively supported by CUPS if the RPM package
+ which provides the matching CUPS backend is installed.
+- 2.18.14
+
+-------------------------------------------------------------------
Thu Apr 23 13:24:07 CEST 2009 - jsmeix@xxxxxxx

- When printing a testpage in the Overview dialog, explicitely

Modified: trunk/printer/src/connectionwizard.ycp
URL:
http://svn.opensuse.org/viewcvs/yast/trunk/printer/src/connectionwizard.ycp?rev=56961&r1=56960&r2=56961&view=diff
==============================================================================
--- trunk/printer/src/connectionwizard.ycp (original)
+++ trunk/printer/src/connectionwizard.ycp Fri Apr 24 12:33:14 2009
@@ -209,6 +209,26 @@
content = getContentFromBackend("usb");
break;
case(`hplip):
+ if( ! Printerlib::TestAndInstallPackage( "hplip", "installed" ) )
+ // Only a notification but no installation of HPLIP in the
Connection Wizard.
+ // Installing the package hplip can pull in tons of required packages
+ // because the hplip package does not only provide the 'hp' backend
but is a
+ // full featured multifunction solution with GUI for HP printers and
all-in-one devices.
+ // HPLIP supports printing, scanning, faxing, photo card access, and
device management.
+ // Additionally installing hplip can become very complicated (see
driveradd.ycp).
+ // Therefore the Connection Wizard is not bloated with installing
HPLIP.
+ { Popup::Message( // Popup::Message when the user had selected "HP
Devices (HPLIP)"
+ // in the Connection Wizard but the RPM package
hplip is not installed:
+ _("To access a HP device via the 'hp'
backend,\nthe RPM package hplip must be installed.")
+ );
+ content = `VBox
+ ( `Left
+ ( `Label
+ ( _("The RPM package hplip is not installed.") )
+ )
+ );
+ break;
+ }
content = getContentFromBackend("hp");
break;
case(`serial):
@@ -325,11 +345,10 @@
// The preset values are from backend/serial.c
// in the CUPS 1.3.9 sources:
[ `item( `id(""), "", true ),
- `item( `id("soft"), "soft" ),
- `item( `id("hard"), "hard" ),
`item( `id("none"), "none" ),
- `item( `id("rtscts"), "rtscts" ),
- `item( `id("dtrdsr"), "dtrdsr" )
+ `item( `id("soft"), "XON/XOFF (software)" ),
+ `item( `id("hard"), "RTS/CTS (hardware)" ),
+ `item( `id("dtrdsr"), "DTR/DSR (hardware)" )
]
)
),
@@ -356,9 +375,26 @@
);
break;
case(`bluetooth):
+ if( ! Printerlib::TestAndInstallPackage( "bluez-cups", "installed" )
)
+ { if( Popup::ContinueCancel( _("To access a bluetooth printer, the
RPM package bluez-cups must be installed.") ) )
+ { Printerlib::TestAndInstallPackage( "bluez-cups", "install" );
+ }
+ // The user can also decide during the actual installation not to
install it
+ // or the installation may have failed for whatever reason
+ // so that we test again whether or not it is now actually
installed:
+ if( ! Printerlib::TestAndInstallPackage( "bluez-cups", "installed"
) )
+ { content = `VBox
+ ( `Left
+ ( `Label
+ ( _("The RPM package bluez-cups is not
installed.") )
+ )
+ );
+ break;
+ }
+ }
// Fallback message what the user may run manually when it fails
// to generate a valid list of bluetooth device IDs:
- string bluetooth_device_list = _("Run 'hcitool scan' to get a list
of bluetooth device IDs.");
+ string bluetooth_device_list = _("It seems there are no bluetooth
device IDs.\nRun 'hcitool scan' to get the bluetooth device IDs.\nEnter the ID
without colons like '1A2B3C4D5E6F'.");
Popup::ShowFeedback( // No title for a simple busy message:
"",
// Busy message:
@@ -428,9 +464,10 @@
case(`scsi):
// Fallback message what the user may run manually when it fails
// to generate the current list of SCSI generic device nodes:
- string scsi_device_list = _("Run 'lsscsi -g' to get a list of SCSI
generic devices (/dev/sg...).");
- if( ! Printerlib::ExecuteBashCommand( "lsscsi -g | tr -s ' ' | cut
-s -d ' ' -f 3- | grep '/dev/sg'" ) )
- { Popup::ErrorDetails( // Popup::ErrorDetails message:
+ string scsi_device_list = _("It seems there are no SCSI generic
devices (/dev/sg...).\nRun 'lsscsi -g' to get a list of SCSI generic devices.");
+ if( ! Printerlib::ExecuteBashCommand( "lsscsi -g | tr -s ' ' | cut
-s -d ' ' -f 3- | grep '/dev/sg' || echo 'no SCSI generic device found' 1>&2" )
)
+ { // Will probably never fail because the final "echo" should exit
successfully in any case:
+ Popup::ErrorDetails( // Popup::ErrorDetails message:
_("Failed to get a list of SCSI generic
devices."),
"lsscsi -g" + "\n" +
Printerlib::result["stderr"]:""
);
@@ -515,6 +552,23 @@
break;
// print via
case(`smb):
+ if( ! Printerlib::TestAndInstallPackage( "samba-client", "installed"
) )
+ { if( Popup::ContinueCancel( _("To access a SMB printer share, the
RPM package samba-client must be installed.") ) )
+ { Printerlib::TestAndInstallPackage( "samba-client", "install" );
+ }
+ // The user can also decide during the actual installation not to
install it
+ // or the installation may have failed for whatever reason
+ // so that we test again whether or not it is now actually
installed:
+ if( ! Printerlib::TestAndInstallPackage( "samba-client",
"installed" ) )
+ { content = `VBox
+ ( `Left
+ ( `Label
+ ( _("The RPM package samba-client is not
installed.") )
+ )
+ );
+ break;
+ }
+ }
content = `VBox
( `Left
( `HBox
@@ -629,6 +683,23 @@
);
break;
case(`ipx):
+ if( ! Printerlib::TestAndInstallPackage( "ncpfs", "installed" ) )
+ { if( Popup::ContinueCancel( _("To access an IPX print queue, the
RPM package ncpfs must be installed.") ) )
+ { Printerlib::TestAndInstallPackage( "ncpfs", "install" );
+ }
+ // The user can also decide during the actual installation not to
install it
+ // or the installation may have failed for whatever reason
+ // so that we test again whether or not it is now actually
installed:
+ if( ! Printerlib::TestAndInstallPackage( "ncpfs", "installed" ) )
+ { content = `VBox
+ ( `Left
+ ( `Label
+ ( _("The RPM package ncpfs is not installed.") )
+ )
+ );
+ break;
+ }
+ }
content = `VBox
( `Left
( `InputField
@@ -688,6 +759,23 @@
);
break;
case(`pipe):
+ if( ! Printerlib::TestAndInstallPackage( "cups-backends",
"installed" ) )
+ { if( Popup::ContinueCancel( _("To print via 'pipe', the RPM package
cups-backends must be installed.") ) )
+ { Printerlib::TestAndInstallPackage( "cups-backends", "install" );
+ }
+ // The user can also decide during the actual installation not to
install it
+ // or the installation may have failed for whatever reason
+ // so that we test again whether or not it is now actually
installed:
+ if( ! Printerlib::TestAndInstallPackage( "cups-backends",
"installed" ) )
+ { content = `VBox
+ ( `Left
+ ( `Label
+ ( _("The RPM package cups-backends is not
installed.") )
+ )
+ );
+ break;
+ }
+ }
content = `VBox
( `Left
( `InputField
@@ -700,6 +788,23 @@
);
break;
case(`beh):
+ if( ! Printerlib::TestAndInstallPackage( "cups-backends",
"installed" ) )
+ { if( Popup::ContinueCancel( _("To use 'beh', the RPM package
cups-backends must be installed.") ) )
+ { Printerlib::TestAndInstallPackage( "cups-backends", "install" );
+ }
+ // The user can also decide during the actual installation not to
install it
+ // or the installation may have failed for whatever reason
+ // so that we test again whether or not it is now actually
installed:
+ if( ! Printerlib::TestAndInstallPackage( "cups-backends",
"installed" ) )
+ { content = `VBox
+ ( `Left
+ ( `Label
+ ( _("The RPM package cups-backends is not
installed.") )
+ )
+ );
+ break;
+ }
+ }
model_content = getContentFromCurrentModel();
content = `VBox
( `Left
@@ -911,8 +1016,8 @@
{ Popup::Error( _("The 'space' parity checking is only supported
with 7 data bits.") );
}
else
- { if( "mark" == serial_parity && "7" != serial_data_bits )
- { Popup::Error( _("The 'mark' parity checking is only supported
with 7 data bits.") );
+ { if( "mark" == serial_parity && "7" != serial_data_bits && "1" !=
serial_stop_bits )
+ { Popup::Error( _("The 'mark' parity checking is only supported
with 7 data bits and 1 stop bit.") );
}
else
{ connection_uri = "serial:" + serial_device_node + "?baud=" +
serial_baud_rate;

Modified: trunk/printer/src/helps.ycp
URL:
http://svn.opensuse.org/viewcvs/yast/trunk/printer/src/helps.ycp?rev=56961&r1=56960&r2=56961&view=diff
==============================================================================
--- trunk/printer/src/helps.ycp (original)
+++ trunk/printer/src/helps.ycp Fri Apr 24 12:33:14 2009
@@ -410,7 +410,23 @@
hp:/usb/HP_LaserJet?serial=1234 
Usually only the autogenerated device URIs work.
When the device is not autodetected, there is usually no communication
-with the device possible and no data can be sent to the device.
+with the device possible and no data can be sent to the device. 
+To access a HP printer or all-in-one device via the backend 'hp',
+the RPM package hplip must be installed.
+The package provides HP's printing and scanning software HPLIP. 
+In contrast devices which are connected via serial port, bluetooth,
+or SCSI are usually not autodetected so that the device URI must be
+manually specified.
+The serial device URI parameters must comply with
+what the serial port in the printer requires,
+see the manual of your serial printer.
+Example device URIs: 
+serial:/dev/ttyS9?baud=9600+bits=8+parity=none+flow=soft+stop=1 
+bluetooth://1A2B3C4D5E6F 
+scsi:/dev/sg9 
+To access a device via bluetooth, the RPM package bluez-cups must be installed.
+The package provides the CUPS backend 'bluetooth' which actually sends the data
+to a bluetooth printer.
") +
// ConnectionWizardDialog help 4/6:
_("
@@ -458,6 +474,10 @@
Ask your network administrator what which print server machine
provides in your particular network: 
Microsoft Windows/SAMBA (SMB/CIFS) 
+To access a SMB printer share, the RPM package samba-client must be installed.
+The package provides the CUPS backend 'smb' which is a link to
+the <tt>/usr/bin/smbspool</tt> program which actually sends the data
+to a SMB printer share.
A server name and a printer share name and optionally a workgroup name
is needed to access it.
Furthermore a user name and a password may be required to get access.

--
To unsubscribe, e-mail: yast-commit+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: yast-commit+help@xxxxxxxxxxxx

< Previous

Next >

Mailinglist Archive: yast-commit (518 mails)

[yast-commit] r56961 - in /trunk/printer: VERSION package/yast2-printer.changes src/connectionwizard.ycp src/helps.ycp

Search this list

List Navigation

This Thread