Hello, I want to use the radeonhd driver 1.25 for my onboard HD3300. I own a display with pivot function an want to rotate it using randrrotation in xorg.conf Section "ServerFlags" Option "AutoAddDevices" "false" Option "RandR" "on" EndSection Section "Device" Identifier "HD3300" Driver "radeonhd" # VideoRam 262144 Option "RandRRotation" "on" Option "AccelMethod" "exa" # Option "AddARGBGLXVisuals" "true" # Option "RenderAccel" "on" Option "UnverifiedFeatures" "on" Option "RandRRotation" "on" Option "Rotate" "left" # Option "HWCursor" "on" Option "Monitor-DVI-D_1" "L220x" EndSection But te rotation does nor work in the log file I found this: (II) Setting vga for screen 0. (**) RADEONHD(0): Depth 24, (--) framebuffer bpp 32 (**) RADEONHD(0): Option "AccelMethod" "exa" (**) RADEONHD(0): Option "DRI" "on" (**) RADEONHD(0): Option "UnverifiedFeatures" "on" (**) RADEONHD(0): Selected EXA 2D acceleration. (II) RADEONHD(0): Unknown card detected: 0x9614:0x1849:0x9614. If - and only if - your card does not work or does not work optimally please contact radeonhd@opensuse.org to help rectify this. Use the subject: 0x9614:0x1849:0x9614: <name of board> and *please* describe the problems you are seeing in your message. (--) RADEONHD(0): Detected an RS780 on an unidentified card (II) RADEONHD(0): Mapped IO @ 0xfe9f0000 to 0x7fe7e6fe7000 (size 0x00010000) (II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location (II) RADEONHD(0): ATOM BIOS Rom: SubsystemVendorID: 0x1002 SubsystemID: 0x1002 IOBaseAddress: 0xc000 Filename: ODE790GX_D2. BIOS Bootup Message: 113-B27722-X28 RS780D DDR2 200e/500m regards Christian -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org