Mailinglist Archive: radeonhd (408 mails)
| < Previous | Next > |
[radeonhd] Ati Radeon Mobility X2300: Failed to initalize XAA; disabling acceleration.
- From: anonymous <drone@xxxxxxx>
- Date: Wed, 03 Jun 2009 21:19:00 +0200
- Message-id: <1244056740.6994.9.camel@tyrion>
Hi,
after today git master commits my Ati Radeon Mobility X2300 lost 2D
acceleration.
(II) RADEONHD(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
18 256x256 slots
5 512x512 slots
(WW) RADEONHD(0): Failed to initalize XAA; disabling acceleration.
---
Drone.
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Default Screen" 0 0
# commented out by update-manager, HAL is now used
# Inputdevice "Generic Keyboard"
# commented out by update-manager, HAL is now used
# Inputdevice "Configured Mouse"
# commented out by update-manager, HAL is now used
# Inputdevice "Synaptics Touchpad"
EndSection
Section "Module"
#Load "dbe" # Double-Buffering Extension
#Load "v4l" # Video for Linux
#Load "extmod"
#Load "type1"
#Load "freetype"
#Load "glx" # 3D layer
Load "dri" # direct rendering
EndSection
# commented out by update-manager, HAL is now used
#Section "InputDevice"
# Identifier "Generic Keyboard"
# Driver "kbd"
# Option "CoreKeyboard"
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "pl"
#EndSection
# commented out by update-manager, HAL is now used
#Section "InputDevice"
# Identifier "Configured Mouse"
# Driver "mouse"
# Option "CorePointer"
# Option "Device" "/dev/input/mice"
# Option "Protocol" "ImPS/2"
# Option "ZAxisMapping" "4 5"
# Option "Emulate3Buttons" "true"
#EndSection
# commented out by update-manager, HAL is now used
#Section "InputDevice"
#
# # Option "RBCornerButton" "0"
# Identifier "Synaptics Touchpad"
# Driver "synaptics"
# Option "SendCoreEvents" "true"
# Option "Device" "/dev/psaux"
# Option "Protocol" "auto-dev"
# Option "SHMConfig" "on"
# Option "HorizScrollDelta" "0"
# Option "RightEdge" "5960"
# Option "LeftEdge" "1450"
# Option "RTCornerButton" "2"
# Option "LTCornerButton" "3"
# # Option "RTCornerButton" "0"
# Option "MinSpeed" "0.06"
# Option "MaxSpeed" "0.30"
# Option "AccelFactor" "0.0010"
# #Option "AccelFactor" "0.0030"
#EndSection
Section "Monitor"
DisplaySize 331 207
Identifier "PANEL"
# Option "DPMS"
# Option "above" "VGA_1"
#Option "PreferredMode" "1280x800"
#UseModes "Modes[0]"
EndSection
#Section "Modes"
#Identifier "Modes[0]"
#EndSection
Section "Device"
Identifier "Ati Radeon Mobility X2300"
Driver "radeonhd"
Option "ForceDPI" "98"
Option "DRI" "true"
# Option "RROutputOrder" "PANEL,VGA_1"
Option "HPD" "Off"
# Option "NoRandr" "true"
# Option "SWcursor" "true"
# Option "AccelMethod" "XAA"
# Option "AccelMethod" "EXA"
Option "AccelMethod" "default"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Ati Radeon Mobility X2300"
Monitor "PANEL"
SubSection "Display"
#Modes "1280x800"
#Virtual 2560 800
#Virtual 2960 1568
Virtual 2960 2048
EndSubSection
# DefaultDepth 24
# SubSection "Display"
# Depth 24
# Modes "default"
# EndSubSection
# SubSection "Display"
# Depth 32
# Modes "default"
# EndSubSection
EndSection
Section "DRI"
# Group "video"
Mode 0666
EndSection
Section "Extensions"
# Option "Composite" "0"
EndSection
Section "ServerFlags"
# Option "AIGLX" "off"
# Option "TexturedVideo" "True"
EndSection
X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
Current Operating System: Linux tyrion 2.6.28-11-generic #42-Ubuntu SMP Fri Apr
17 01:57:59 UTC 2009 i686
Build Date: 09 April 2009 02:10:02AM
xorg-server 2:1.6.0-0ubuntu14 (buildd@xxxxxxxxxxxxxx)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jun 3 21:02:10 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "PANEL"
(**) | |-->Device "Ati Radeon Mobility X2300"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable
AllowEmptyInput.
(II) Loader magic: 0x3bc0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@1:0:0) ATI Technologies Inc Mobility Radeon X2300 rev 0, Mem @
0xf0000000/134217728, 0xfdff0000/65536, I/O @ 0x0000b000/256, BIOS @
0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded by default.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also specified in
the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "radeonhd"
(II) Loading /usr/lib/xorg/modules/drivers//radeonhd_drv.so
(II) Module radeonhd: vendor="AMD GPG"
compiled for 1.6.0, module version = 1.2.5
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) RADEONHD: X driver for the following AMD GPG (ATI) graphics devices:
RV505 : Radeon X1550, X1550 64bit.
RV515 : Radeon X1300, X1550, X1600; FireGL V3300, V3350.
RV516 : Radeon X1300, X1550, X1550 64-bit, X1600; FireMV 2250.
R520 : Radeon X1800; FireGL V5300, V7200, V7300, V7350.
RV530 : Radeon X1300 XT, X1600, X1600 Pro, X1650; FireGL V3400, V5200.
RV535 : Radeon X1300, X1650.
RV550 : Radeon X2300 HD.
RV560 : Radeon X1650.
RV570 : Radeon X1950, X1950 GT; FireGL V7400.
R580 : Radeon X1900, X1950; AMD Stream Processor.
R600 : Radeon HD 2900 GT/Pro/XT; FireGL V7600/V8600/V8650.
RV610 : Radeon HD 2350, HD 2400 Pro/XT, HD 2400 Pro AGP; FireGL V4000.
RV620 : Radeon HD 3450, HD 3470.
RV630 : Radeon HD 2600 LE/Pro/XT, HD 2600 Pro/XT AGP; Gemini RV630;
FireGL V3600/V5600.
RV635 : Radeon HD 3650, HD 3670.
RV670 : Radeon HD 3690, 3850, HD 3870, FireGL V7700, FireStream 9170.
R680 : Radeon HD 3870 X2.
M52 : Mobility Radeon X1300.
M54 : Mobility Radeon X1400; M54-GL.
M56 : Mobility Radeon X1600; Mobility FireGL V5200.
M58 : Mobility Radeon X1800, X1800 XT; Mobility FireGL V7100, V7200.
M62 : Mobility Radeon X1350.
M64 : Mobility Radeon X1450, X2300.
M66 : Mobility Radeon X1700, X1700 XT; FireGL V5250.
M68 : Mobility Radeon X1900.
M71 : Mobility Radeon HD 2300.
M72 : Mobility Radeon HD 2400; Radeon E2400.
M74 : Mobility Radeon HD 2400 XT.
M76 : Mobility Radeon HD 2600;
(Gemini ATI) Mobility Radeon HD 2600 XT.
M82 : Mobility Radeon HD 3400.
M86 : Mobility Radeon HD 3650, HD 3670, Mobility FireGL V5700.
M88 : Mobility Radeon HD 3850, HD 3850 X2, HD 3870, HD3870 X2.
RS600 : Radeon Xpress 1200, Xpress 1250.
RS690 : Radeon X1200, X1250, X1270.
RS740 : RS740, RS740M.
RS780 : Radeon HD 3100/3200/3300 Series.
R700 : Radeon R700.
RV710 : Radeon HD4570, HD4350.
RV730 : Radeon HD4670, HD4650.
RV740 : Radeon HD4770. EXPERIMENTAL AND UNTESTED.
RV770 : Radeon HD 4800 Series; Everest, K2, Denali ATI FirePro.
RV790 : Radeon HD 4890.
M92 : Mobility Radeon HD4330, HD4530, HD4570. EXPERIMENTAL.
M93 : Mobility Radeon M93. EXPERIMENTAL AND UNTESTED.
M96 : Mobility Radeon HD4600.
M97 : Mobility Radeon HD4860. EXPERIMENTAL AND UNTESTED.
M98 : Mobility Radeon HD4850, HD4870.
(II) RADEONHD: version 1.2.5, built from git branch master, commit d89f5d87
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(==) RADEONHD(0): Depth 24, (--) framebuffer bpp 32
(**) RADEONHD(0): Option "AccelMethod" "default"
(**) RADEONHD(0): Option "forcedpi" "98"
(**) RADEONHD(0): Option "HPD" "Off"
(**) RADEONHD(0): Option "DRI" "true"
(**) RADEONHD(0): Selected XAA 2D acceleration.
(WW) RADEONHD(0): !!! Option HPD is set !!!
This shall only be used to work around broken connector tables.
Please report your findings to radeonhd@xxxxxxxxxxxx
(II) RADEONHD(0): Unknown card detected: 0x718A:0x1043:0x1449.
If - and only if - your card does not work or does not work optimally
please contact radeonhd@xxxxxxxxxxxx to help rectify this.
Use the subject: 0x718A:0x1043:0x1449: <name of board>
and *please* describe the problems you are seeing
in your message.
(--) RADEONHD(0): Detected an M64 on an unidentified card
(II) RADEONHD(0): Mapped IO @ 0xfdff0000 to 0xb794d000 (size 0x00010000)
(II) RADEONHD(0): PCIE Card Detected
(II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location
(II) RADEONHD(0): ATOM BIOS Rom:
SubsystemVendorID: 0x1043 SubsystemID: 0x1449
IOBaseAddress: 0xb000
Filename: f3jr0111.bin
BIOS Bootup Message:
Asus F3JR M64M BIOS ASID:A13318.005$
(II) RADEONHD(0): Analog TV Default Mode: 1
(II) RADEONHD(0): Found default TV Mode NTSC
(--) RADEONHD(0): VideoRAM: 131072 kByte
(II) RADEONHD(0): Framebuffer space used by Firmware (kb): 20
(II) RADEONHD(0): Start of VRAM area used by Firmware: 0x7ffb000
(II) RADEONHD(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEONHD(0): AtomBIOS VRAM scratch base: 0x7ffb000
(II) RADEONHD(0): Default Engine Clock: 480000
(II) RADEONHD(0): Default Memory Clock: 400000
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1100000
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEONHD(0): Maximum Pixel Clock: 400000
(II) RADEONHD(0): Reference Clock: 27000
(II) RADEONHD(0): Found libdri 5.4.0.
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEONHD(0): Found libdrm 1.3.0.
(II) RADEONHD(0): Found radeon drm 1.29.0.
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEONHD(0): Default Engine Clock: 480000
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f90
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f90
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 0" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f94
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f94
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 1" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f98
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f98
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 2" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) RADEONHD(0): Detected VGA mode.
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1100000
(II) RADEONHD(0): Maximum Pixel Clock: 400000
(II) RADEONHD(0): Reference Clock: 27000
(II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00000000 (size =
0x00004000)
(II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00004000 (size =
0x00004000)
(EE) RADEONHD(0): rhdAtomGetDDCIndex: GPIO_DDC Index 7 exceeds maximum 5
(II) RADEONHD(0): Connector[0] {RHD_CONNECTOR_VGA, "VGA CRT1", RHD_DDC_0,
RHD_HPD_NONE, { RHD_OUTPUT_DACA, RHD_OUTPUT_NONE } }
(II) RADEONHD(0): Connector[1] {RHD_CONNECTOR_PANEL, "PANEL LCD1",
RHD_DDC_NONE, RHD_HPD_NONE, { RHD_OUTPUT_LVTMA, RHD_OUTPUT_NONE } }
(II) RADEONHD(0): Connector[2] {RHD_CONNECTOR_TV, "SVIDEO TV1", RHD_DDC_NONE,
RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
(II) RADEONHD(0): Connector[3] {RHD_CONNECTOR_DVI, "DVI-I DFP1", RHD_DDC_1,
RHD_HPD_NONE /*0*/, { RHD_OUTPUT_TMDSA, RHD_OUTPUT_NONE } }
(--) RADEONHD(0): Attaching Output DAC A to Connector VGA 1
(II) RADEONHD(0): LVDS SEQ Dig onto DE: 30
(II) RADEONHD(0): LVDS SEQ DE to BL: 250
(II) RADEONHD(0): LVDS Off Delay: 500
(II) RADEONHD(0): LVDS Duallink: 0x0
(II) RADEONHD(0): LVDS 24Bit: 0x0
(II) RADEONHD(0): LVDS FPDI: 0x0
(II) RADEONHD(0): LVDS Temporal Dither : 0x1
(II) RADEONHD(0): LVDS Spatial Dither : 0x0
(II) RADEONHD(0): LVDS Grey Level: 0x2
(II) RADEONHD(0): AtomBIOS returned 2 Grey Levels
(--) RADEONHD(0): Detected a 18bit single link panel.
(--) RADEONHD(0): Attaching Output LVDS to Connector PANEL
(--) RADEONHD(0): Attaching Output DAC B to Connector TV SVIDEO
(--) RADEONHD(0): Attaching Output TMDS A to Connector DVI-D 1
(II) RADEONHD(0): RandR: Adding RRoutput VGA_1 for Output DAC A
(II) RADEONHD(0): RandR: Adding RRoutput PANEL for Output LVDS
(II) RADEONHD(0): RandR: Adding RRoutput TV_SVIDEO for Output DAC B
(II) RADEONHD(0): RandR: Adding RRoutput DVI-D_1 for Output TMDS A
(II) RADEONHD(0): Output VGA_1 using monitor section PANEL
(II) RADEONHD(0): Output VGA_1 has no monitor section
(II) RADEONHD(0): Output PANEL using monitor section PANEL
(II) RADEONHD(0): Output TV_SVIDEO has no monitor section
(II) RADEONHD(0): Output DVI-D_1 has no monitor section
(II) RADEONHD(0): Query for AtomBIOS Get Panel EDID: failed
(II) RADEONHD(0): Found native mode: Modeline "1280x800" 68.94 1280 1296
1344 1408 800 801 804 816
(WW) RADEONHD(0): No monitor size info, assuming 96dpi.
(II) RADEONHD(0): Output VGA_1 disconnected
(II) RADEONHD(0): Output PANEL connected
(II) RADEONHD(0): Output TV_SVIDEO disconnected
(II) RADEONHD(0): Output DVI-D_1 disconnected
(II) RADEONHD(0): Using exact sizes for initial modes
(II) RADEONHD(0): Output PANEL using initial mode 1280x800
(II) RADEONHD(0): RandR 1.2 support enabled
(==) RADEONHD(0): RGB weight 888
(==) RADEONHD(0): Default visual is TrueColor
(==) RADEONHD(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEONHD(0): Using 2960x2048 Framebuffer with 3008 pitch
(II) RADEONHD(0): FB: Allocated ScanoutBuffer at offset 0x00008000 (size =
0x01780000)
(**) RADEONHD(0): Display dimensions: (331, 207) mm
(**) RADEONHD(0): DPI set to (227, 251)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(II) RADEONHD(0): FB: Allocated Offscreen Buffer at offset 0x01788000 (size =
0x00CCC000)
(II) RADEONHD(0): FB: Allocated DRI Back Buffer at offset 0x02454000 (size =
0x01780000)
(II) RADEONHD(0): FB: Allocated DRI Depth Buffer at offset 0x03BD4000 (size =
0x01780000)
(II) RADEONHD(0): FB: Allocated GART table at offset 0x07FF8000 (size =
0x00008000, end of FB)
(II) RADEONHD(0): FB: Allocated DRI Textures at offset 0x05354000 (size =
0x02C00000)
(II) RADEONHD(0): Using 16 MB GART aperture
(II) RADEONHD(0): Using 2 MB for the ring buffer
(II) RADEONHD(0): Using 2 MB for vertex/indirect buffers
(II) RADEONHD(0): Using 12 MB for GART textures
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) RADEONHD(0): Mapped IO @ 0xfdff0000 to 0xb794d000 (size 0x00010000)
(II) RADEONHD(0): Mapped FB @ 0xf0000000 to 0xaf8da000 (size 0x08000000)
(II) RADEONHD(0): Current Engine Clock: 479250
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEONHD(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEONHD(0): [drm] framebuffer handle = 0xf0000000
(II) RADEONHD(0): [drm] added 1 reserved context for kernel
(II) RADEONHD(0): X context handle = 0x1
(II) RADEONHD(0): [drm] installed DRM signal handler
(II) RADEONHD(0): [pci] 16384 kB allocated with handle 0xf890e000
(II) RADEONHD(0): [pci] ring handle = 0xf890e000
(II) RADEONHD(0): [pci] Ring mapped at 0xaf696000
(II) RADEONHD(0): [pci] Ring contents 0x00000000
(II) RADEONHD(0): [pci] ring read ptr handle = 0xf8b0f000
(II) RADEONHD(0): [pci] Ring read ptr mapped at 0xaf695000
(II) RADEONHD(0): [pci] Ring read ptr contents 0x00000000
(II) RADEONHD(0): [pci] vertex/indirect buffers handle = 0xf8b10000
(II) RADEONHD(0): [pci] Vertex/indirect buffers mapped at 0xaf495000
(II) RADEONHD(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEONHD(0): [pci] GART texture map handle = 0xf8d10000
(II) RADEONHD(0): [pci] GART Texture map mapped at 0xae8d5000
(II) RADEONHD(0): [drm] register handle = 0xfdff0000
(II) RADEONHD(0): [dri] Visual configs initialized
(II) RADEONHD(0): [DRI] installation complete
(II) RADEONHD(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEONHD(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEONHD(0): [drm] dma control initialized, using IRQ 16
(II) RADEONHD(0): [drm] Initialized kernel GART heap manager, 12320768
(II) RADEONHD(0): Direct rendering enabled
(II) RADEONHD(0): Using DRM Command Processor (indirect) for acceleration.
(II) RADEONHD(0): Using 1115 scanlines of offscreen memory
(II) RADEONHD(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
18 256x256 slots
5 512x512 slots
(WW) RADEONHD(0): Failed to initalize XAA; disabling acceleration.
(==) RADEONHD(0): Backing store disabled
(==) RADEONHD(0): Silken mouse enabled
(II) RADEONHD(0): RandR 1.2 enabled, ignore the following RandR disabled
message.
(II) RADEONHD(0): On Crtc 0 Setting 60.0 Hz Mode: Modeline "1280x800" 68.94
1280 1296 1344 1408 800 801 804 816
None
(II) RADEONHD(0): DPMS enabled
(II) RADEONHD(0): Xv: Textured Video initialised.
(--) RandR disabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEONHD(0): Setting screen physical size to 331 x 207
(II) config/hal: Adding input device Video Bus
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event7"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Video Bus: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) Video Bus: xkb_model: "pc105"
(**) Option "xkb_layout" "pl"
(**) Video Bus: xkb_layout: "pl"
(**) Option "xkb_options" "lv3:ralt_switch"
(**) Video Bus: xkb_options: "lv3:ralt_switch"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event5"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type:
KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) AT Translated Set 2 keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "pl"
(**) AT Translated Set 2 keyboard: xkb_layout: "pl"
(**) Option "xkb_options" "lv3:ralt_switch"
(**) AT Translated Set 2 keyboard: xkb_options: "lv3:ralt_switch"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event4"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation"
(type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 0.99.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 0.99.3
(**) Option "Device" "/dev/input/event8"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
(**) Option "SHMConfig" "True"
(--) SynPS/2 Synaptics TouchPad touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type:
TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(--) SynPS/2 Synaptics TouchPad touchpad found
(II) RADEONHD(0): Query for AtomBIOS Get Panel EDID: failed
(II) RADEONHD(0): Found native mode: Modeline "1280x800" 68.94 1280 1296
1344 1408 800 801 804 816
(WW) RADEONHD(0): No monitor size info, assuming 96dpi.
(II) RADEONHD(0): Query for AtomBIOS Get Panel EDID: failed
(II) RADEONHD(0): Found native mode: Modeline "1280x800" 68.94 1280 1296
1344 1408 800 801 804 816
(WW) RADEONHD(0): No monitor size info, assuming 96dpi.
(II) RADEONHD(0): Query for AtomBIOS Get Panel EDID: failed
(II) RADEONHD(0): Found native mode: Modeline "1280x800" 68.94 1280 1296
1344 1408 800 801 804 816
(WW) RADEONHD(0): No monitor size info, assuming 96dpi.
(II) RADEONHD(0): Query for AtomBIOS Get Panel EDID: failed
(II) RADEONHD(0): Found native mode: Modeline "1280x800" 68.94 1280 1296
1344 1408 800 801 804 816
(WW) RADEONHD(0): No monitor size info, assuming 96dpi.
(II) RADEONHD(0): Query for AtomBIOS Get Panel EDID: failed
(II) RADEONHD(0): Found native mode: Modeline "1280x800" 68.94 1280 1296
1344 1408 800 801 804 816
(WW) RADEONHD(0): No monitor size info, assuming 96dpi.
after today git master commits my Ati Radeon Mobility X2300 lost 2D
acceleration.
(II) RADEONHD(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
18 256x256 slots
5 512x512 slots
(WW) RADEONHD(0): Failed to initalize XAA; disabling acceleration.
---
Drone.
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Default Screen" 0 0
# commented out by update-manager, HAL is now used
# Inputdevice "Generic Keyboard"
# commented out by update-manager, HAL is now used
# Inputdevice "Configured Mouse"
# commented out by update-manager, HAL is now used
# Inputdevice "Synaptics Touchpad"
EndSection
Section "Module"
#Load "dbe" # Double-Buffering Extension
#Load "v4l" # Video for Linux
#Load "extmod"
#Load "type1"
#Load "freetype"
#Load "glx" # 3D layer
Load "dri" # direct rendering
EndSection
# commented out by update-manager, HAL is now used
#Section "InputDevice"
# Identifier "Generic Keyboard"
# Driver "kbd"
# Option "CoreKeyboard"
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "pl"
#EndSection
# commented out by update-manager, HAL is now used
#Section "InputDevice"
# Identifier "Configured Mouse"
# Driver "mouse"
# Option "CorePointer"
# Option "Device" "/dev/input/mice"
# Option "Protocol" "ImPS/2"
# Option "ZAxisMapping" "4 5"
# Option "Emulate3Buttons" "true"
#EndSection
# commented out by update-manager, HAL is now used
#Section "InputDevice"
#
# # Option "RBCornerButton" "0"
# Identifier "Synaptics Touchpad"
# Driver "synaptics"
# Option "SendCoreEvents" "true"
# Option "Device" "/dev/psaux"
# Option "Protocol" "auto-dev"
# Option "SHMConfig" "on"
# Option "HorizScrollDelta" "0"
# Option "RightEdge" "5960"
# Option "LeftEdge" "1450"
# Option "RTCornerButton" "2"
# Option "LTCornerButton" "3"
# # Option "RTCornerButton" "0"
# Option "MinSpeed" "0.06"
# Option "MaxSpeed" "0.30"
# Option "AccelFactor" "0.0010"
# #Option "AccelFactor" "0.0030"
#EndSection
Section "Monitor"
DisplaySize 331 207
Identifier "PANEL"
# Option "DPMS"
# Option "above" "VGA_1"
#Option "PreferredMode" "1280x800"
#UseModes "Modes[0]"
EndSection
#Section "Modes"
#Identifier "Modes[0]"
#EndSection
Section "Device"
Identifier "Ati Radeon Mobility X2300"
Driver "radeonhd"
Option "ForceDPI" "98"
Option "DRI" "true"
# Option "RROutputOrder" "PANEL,VGA_1"
Option "HPD" "Off"
# Option "NoRandr" "true"
# Option "SWcursor" "true"
# Option "AccelMethod" "XAA"
# Option "AccelMethod" "EXA"
Option "AccelMethod" "default"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Ati Radeon Mobility X2300"
Monitor "PANEL"
SubSection "Display"
#Modes "1280x800"
#Virtual 2560 800
#Virtual 2960 1568
Virtual 2960 2048
EndSubSection
# DefaultDepth 24
# SubSection "Display"
# Depth 24
# Modes "default"
# EndSubSection
# SubSection "Display"
# Depth 32
# Modes "default"
# EndSubSection
EndSection
Section "DRI"
# Group "video"
Mode 0666
EndSection
Section "Extensions"
# Option "Composite" "0"
EndSection
Section "ServerFlags"
# Option "AIGLX" "off"
# Option "TexturedVideo" "True"
EndSection
X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
Current Operating System: Linux tyrion 2.6.28-11-generic #42-Ubuntu SMP Fri Apr
17 01:57:59 UTC 2009 i686
Build Date: 09 April 2009 02:10:02AM
xorg-server 2:1.6.0-0ubuntu14 (buildd@xxxxxxxxxxxxxx)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jun 3 21:02:10 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "PANEL"
(**) | |-->Device "Ati Radeon Mobility X2300"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable
AllowEmptyInput.
(II) Loader magic: 0x3bc0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@1:0:0) ATI Technologies Inc Mobility Radeon X2300 rev 0, Mem @
0xf0000000/134217728, 0xfdff0000/65536, I/O @ 0x0000b000/256, BIOS @
0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded by default.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also specified in
the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "radeonhd"
(II) Loading /usr/lib/xorg/modules/drivers//radeonhd_drv.so
(II) Module radeonhd: vendor="AMD GPG"
compiled for 1.6.0, module version = 1.2.5
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) RADEONHD: X driver for the following AMD GPG (ATI) graphics devices:
RV505 : Radeon X1550, X1550 64bit.
RV515 : Radeon X1300, X1550, X1600; FireGL V3300, V3350.
RV516 : Radeon X1300, X1550, X1550 64-bit, X1600; FireMV 2250.
R520 : Radeon X1800; FireGL V5300, V7200, V7300, V7350.
RV530 : Radeon X1300 XT, X1600, X1600 Pro, X1650; FireGL V3400, V5200.
RV535 : Radeon X1300, X1650.
RV550 : Radeon X2300 HD.
RV560 : Radeon X1650.
RV570 : Radeon X1950, X1950 GT; FireGL V7400.
R580 : Radeon X1900, X1950; AMD Stream Processor.
R600 : Radeon HD 2900 GT/Pro/XT; FireGL V7600/V8600/V8650.
RV610 : Radeon HD 2350, HD 2400 Pro/XT, HD 2400 Pro AGP; FireGL V4000.
RV620 : Radeon HD 3450, HD 3470.
RV630 : Radeon HD 2600 LE/Pro/XT, HD 2600 Pro/XT AGP; Gemini RV630;
FireGL V3600/V5600.
RV635 : Radeon HD 3650, HD 3670.
RV670 : Radeon HD 3690, 3850, HD 3870, FireGL V7700, FireStream 9170.
R680 : Radeon HD 3870 X2.
M52 : Mobility Radeon X1300.
M54 : Mobility Radeon X1400; M54-GL.
M56 : Mobility Radeon X1600; Mobility FireGL V5200.
M58 : Mobility Radeon X1800, X1800 XT; Mobility FireGL V7100, V7200.
M62 : Mobility Radeon X1350.
M64 : Mobility Radeon X1450, X2300.
M66 : Mobility Radeon X1700, X1700 XT; FireGL V5250.
M68 : Mobility Radeon X1900.
M71 : Mobility Radeon HD 2300.
M72 : Mobility Radeon HD 2400; Radeon E2400.
M74 : Mobility Radeon HD 2400 XT.
M76 : Mobility Radeon HD 2600;
(Gemini ATI) Mobility Radeon HD 2600 XT.
M82 : Mobility Radeon HD 3400.
M86 : Mobility Radeon HD 3650, HD 3670, Mobility FireGL V5700.
M88 : Mobility Radeon HD 3850, HD 3850 X2, HD 3870, HD3870 X2.
RS600 : Radeon Xpress 1200, Xpress 1250.
RS690 : Radeon X1200, X1250, X1270.
RS740 : RS740, RS740M.
RS780 : Radeon HD 3100/3200/3300 Series.
R700 : Radeon R700.
RV710 : Radeon HD4570, HD4350.
RV730 : Radeon HD4670, HD4650.
RV740 : Radeon HD4770. EXPERIMENTAL AND UNTESTED.
RV770 : Radeon HD 4800 Series; Everest, K2, Denali ATI FirePro.
RV790 : Radeon HD 4890.
M92 : Mobility Radeon HD4330, HD4530, HD4570. EXPERIMENTAL.
M93 : Mobility Radeon M93. EXPERIMENTAL AND UNTESTED.
M96 : Mobility Radeon HD4600.
M97 : Mobility Radeon HD4860. EXPERIMENTAL AND UNTESTED.
M98 : Mobility Radeon HD4850, HD4870.
(II) RADEONHD: version 1.2.5, built from git branch master, commit d89f5d87
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(==) RADEONHD(0): Depth 24, (--) framebuffer bpp 32
(**) RADEONHD(0): Option "AccelMethod" "default"
(**) RADEONHD(0): Option "forcedpi" "98"
(**) RADEONHD(0): Option "HPD" "Off"
(**) RADEONHD(0): Option "DRI" "true"
(**) RADEONHD(0): Selected XAA 2D acceleration.
(WW) RADEONHD(0): !!! Option HPD is set !!!
This shall only be used to work around broken connector tables.
Please report your findings to radeonhd@xxxxxxxxxxxx
(II) RADEONHD(0): Unknown card detected: 0x718A:0x1043:0x1449.
If - and only if - your card does not work or does not work optimally
please contact radeonhd@xxxxxxxxxxxx to help rectify this.
Use the subject: 0x718A:0x1043:0x1449: <name of board>
and *please* describe the problems you are seeing
in your message.
(--) RADEONHD(0): Detected an M64 on an unidentified card
(II) RADEONHD(0): Mapped IO @ 0xfdff0000 to 0xb794d000 (size 0x00010000)
(II) RADEONHD(0): PCIE Card Detected
(II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location
(II) RADEONHD(0): ATOM BIOS Rom:
SubsystemVendorID: 0x1043 SubsystemID: 0x1449
IOBaseAddress: 0xb000
Filename: f3jr0111.bin
BIOS Bootup Message:
Asus F3JR M64M BIOS ASID:A13318.005$
(II) RADEONHD(0): Analog TV Default Mode: 1
(II) RADEONHD(0): Found default TV Mode NTSC
(--) RADEONHD(0): VideoRAM: 131072 kByte
(II) RADEONHD(0): Framebuffer space used by Firmware (kb): 20
(II) RADEONHD(0): Start of VRAM area used by Firmware: 0x7ffb000
(II) RADEONHD(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEONHD(0): AtomBIOS VRAM scratch base: 0x7ffb000
(II) RADEONHD(0): Default Engine Clock: 480000
(II) RADEONHD(0): Default Memory Clock: 400000
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1100000
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEONHD(0): Maximum Pixel Clock: 400000
(II) RADEONHD(0): Reference Clock: 27000
(II) RADEONHD(0): Found libdri 5.4.0.
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEONHD(0): Found libdrm 1.3.0.
(II) RADEONHD(0): Found radeon drm 1.29.0.
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEONHD(0): Default Engine Clock: 480000
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f90
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f90
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 0" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f94
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f94
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 1" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f98
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f98
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 2" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) RADEONHD(0): Detected VGA mode.
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1100000
(II) RADEONHD(0): Maximum Pixel Clock: 400000
(II) RADEONHD(0): Reference Clock: 27000
(II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00000000 (size =
0x00004000)
(II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00004000 (size =
0x00004000)
(EE) RADEONHD(0): rhdAtomGetDDCIndex: GPIO_DDC Index 7 exceeds maximum 5
(II) RADEONHD(0): Connector[0] {RHD_CONNECTOR_VGA, "VGA CRT1", RHD_DDC_0,
RHD_HPD_NONE, { RHD_OUTPUT_DACA, RHD_OUTPUT_NONE } }
(II) RADEONHD(0): Connector[1] {RHD_CONNECTOR_PANEL, "PANEL LCD1",
RHD_DDC_NONE, RHD_HPD_NONE, { RHD_OUTPUT_LVTMA, RHD_OUTPUT_NONE } }
(II) RADEONHD(0): Connector[2] {RHD_CONNECTOR_TV, "SVIDEO TV1", RHD_DDC_NONE,
RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
(II) RADEONHD(0): Connector[3] {RHD_CONNECTOR_DVI, "DVI-I DFP1", RHD_DDC_1,
RHD_HPD_NONE /*0*/, { RHD_OUTPUT_TMDSA, RHD_OUTPUT_NONE } }
(--) RADEONHD(0): Attaching Output DAC A to Connector VGA 1
(II) RADEONHD(0): LVDS SEQ Dig onto DE: 30
(II) RADEONHD(0): LVDS SEQ DE to BL: 250
(II) RADEONHD(0): LVDS Off Delay: 500
(II) RADEONHD(0): LVDS Duallink: 0x0
(II) RADEONHD(0): LVDS 24Bit: 0x0
(II) RADEONHD(0): LVDS FPDI: 0x0
(II) RADEONHD(0): LVDS Temporal Dither : 0x1
(II) RADEONHD(0): LVDS Spatial Dither : 0x0
(II) RADEONHD(0): LVDS Grey Level: 0x2
(II) RADEONHD(0): AtomBIOS returned 2 Grey Levels
(--) RADEONHD(0): Detected a 18bit single link panel.
(--) RADEONHD(0): Attaching Output LVDS to Connector PANEL
(--) RADEONHD(0): Attaching Output DAC B to Connector TV SVIDEO
(--) RADEONHD(0): Attaching Output TMDS A to Connector DVI-D 1
(II) RADEONHD(0): RandR: Adding RRoutput VGA_1 for Output DAC A
(II) RADEONHD(0): RandR: Adding RRoutput PANEL for Output LVDS
(II) RADEONHD(0): RandR: Adding RRoutput TV_SVIDEO for Output DAC B
(II) RADEONHD(0): RandR: Adding RRoutput DVI-D_1 for Output TMDS A
(II) RADEONHD(0): Output VGA_1 using monitor section PANEL
(II) RADEONHD(0): Output VGA_1 has no monitor section
(II) RADEONHD(0): Output PANEL using monitor section PANEL
(II) RADEONHD(0): Output TV_SVIDEO has no monitor section
(II) RADEONHD(0): Output DVI-D_1 has no monitor section
(II) RADEONHD(0): Query for AtomBIOS Get Panel EDID: failed
(II) RADEONHD(0): Found native mode: Modeline "1280x800" 68.94 1280 1296
1344 1408 800 801 804 816
(WW) RADEONHD(0): No monitor size info, assuming 96dpi.
(II) RADEONHD(0): Output VGA_1 disconnected
(II) RADEONHD(0): Output PANEL connected
(II) RADEONHD(0): Output TV_SVIDEO disconnected
(II) RADEONHD(0): Output DVI-D_1 disconnected
(II) RADEONHD(0): Using exact sizes for initial modes
(II) RADEONHD(0): Output PANEL using initial mode 1280x800
(II) RADEONHD(0): RandR 1.2 support enabled
(==) RADEONHD(0): RGB weight 888
(==) RADEONHD(0): Default visual is TrueColor
(==) RADEONHD(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEONHD(0): Using 2960x2048 Framebuffer with 3008 pitch
(II) RADEONHD(0): FB: Allocated ScanoutBuffer at offset 0x00008000 (size =
0x01780000)
(**) RADEONHD(0): Display dimensions: (331, 207) mm
(**) RADEONHD(0): DPI set to (227, 251)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(II) RADEONHD(0): FB: Allocated Offscreen Buffer at offset 0x01788000 (size =
0x00CCC000)
(II) RADEONHD(0): FB: Allocated DRI Back Buffer at offset 0x02454000 (size =
0x01780000)
(II) RADEONHD(0): FB: Allocated DRI Depth Buffer at offset 0x03BD4000 (size =
0x01780000)
(II) RADEONHD(0): FB: Allocated GART table at offset 0x07FF8000 (size =
0x00008000, end of FB)
(II) RADEONHD(0): FB: Allocated DRI Textures at offset 0x05354000 (size =
0x02C00000)
(II) RADEONHD(0): Using 16 MB GART aperture
(II) RADEONHD(0): Using 2 MB for the ring buffer
(II) RADEONHD(0): Using 2 MB for vertex/indirect buffers
(II) RADEONHD(0): Using 12 MB for GART textures
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) RADEONHD(0): Mapped IO @ 0xfdff0000 to 0xb794d000 (size 0x00010000)
(II) RADEONHD(0): Mapped FB @ 0xf0000000 to 0xaf8da000 (size 0x08000000)
(II) RADEONHD(0): Current Engine Clock: 479250
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEONHD(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEONHD(0): [drm] framebuffer handle = 0xf0000000
(II) RADEONHD(0): [drm] added 1 reserved context for kernel
(II) RADEONHD(0): X context handle = 0x1
(II) RADEONHD(0): [drm] installed DRM signal handler
(II) RADEONHD(0): [pci] 16384 kB allocated with handle 0xf890e000
(II) RADEONHD(0): [pci] ring handle = 0xf890e000
(II) RADEONHD(0): [pci] Ring mapped at 0xaf696000
(II) RADEONHD(0): [pci] Ring contents 0x00000000
(II) RADEONHD(0): [pci] ring read ptr handle = 0xf8b0f000
(II) RADEONHD(0): [pci] Ring read ptr mapped at 0xaf695000
(II) RADEONHD(0): [pci] Ring read ptr contents 0x00000000
(II) RADEONHD(0): [pci] vertex/indirect buffers handle = 0xf8b10000
(II) RADEONHD(0): [pci] Vertex/indirect buffers mapped at 0xaf495000
(II) RADEONHD(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEONHD(0): [pci] GART texture map handle = 0xf8d10000
(II) RADEONHD(0): [pci] GART Texture map mapped at 0xae8d5000
(II) RADEONHD(0): [drm] register handle = 0xfdff0000
(II) RADEONHD(0): [dri] Visual configs initialized
(II) RADEONHD(0): [DRI] installation complete
(II) RADEONHD(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEONHD(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEONHD(0): [drm] dma control initialized, using IRQ 16
(II) RADEONHD(0): [drm] Initialized kernel GART heap manager, 12320768
(II) RADEONHD(0): Direct rendering enabled
(II) RADEONHD(0): Using DRM Command Processor (indirect) for acceleration.
(II) RADEONHD(0): Using 1115 scanlines of offscreen memory
(II) RADEONHD(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
18 256x256 slots
5 512x512 slots
(WW) RADEONHD(0): Failed to initalize XAA; disabling acceleration.
(==) RADEONHD(0): Backing store disabled
(==) RADEONHD(0): Silken mouse enabled
(II) RADEONHD(0): RandR 1.2 enabled, ignore the following RandR disabled
message.
(II) RADEONHD(0): On Crtc 0 Setting 60.0 Hz Mode: Modeline "1280x800" 68.94
1280 1296 1344 1408 800 801 804 816
None
(II) RADEONHD(0): DPMS enabled
(II) RADEONHD(0): Xv: Textured Video initialised.
(--) RandR disabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEONHD(0): Setting screen physical size to 331 x 207
(II) config/hal: Adding input device Video Bus
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event7"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Video Bus: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) Video Bus: xkb_model: "pc105"
(**) Option "xkb_layout" "pl"
(**) Video Bus: xkb_layout: "pl"
(**) Option "xkb_options" "lv3:ralt_switch"
(**) Video Bus: xkb_options: "lv3:ralt_switch"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event5"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type:
KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) AT Translated Set 2 keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "pl"
(**) AT Translated Set 2 keyboard: xkb_layout: "pl"
(**) Option "xkb_options" "lv3:ralt_switch"
(**) AT Translated Set 2 keyboard: xkb_options: "lv3:ralt_switch"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event4"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation"
(type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 0.99.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 0.99.3
(**) Option "Device" "/dev/input/event8"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
(**) Option "SHMConfig" "True"
(--) SynPS/2 Synaptics TouchPad touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type:
TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(--) SynPS/2 Synaptics TouchPad touchpad found
(II) RADEONHD(0): Query for AtomBIOS Get Panel EDID: failed
(II) RADEONHD(0): Found native mode: Modeline "1280x800" 68.94 1280 1296
1344 1408 800 801 804 816
(WW) RADEONHD(0): No monitor size info, assuming 96dpi.
(II) RADEONHD(0): Query for AtomBIOS Get Panel EDID: failed
(II) RADEONHD(0): Found native mode: Modeline "1280x800" 68.94 1280 1296
1344 1408 800 801 804 816
(WW) RADEONHD(0): No monitor size info, assuming 96dpi.
(II) RADEONHD(0): Query for AtomBIOS Get Panel EDID: failed
(II) RADEONHD(0): Found native mode: Modeline "1280x800" 68.94 1280 1296
1344 1408 800 801 804 816
(WW) RADEONHD(0): No monitor size info, assuming 96dpi.
(II) RADEONHD(0): Query for AtomBIOS Get Panel EDID: failed
(II) RADEONHD(0): Found native mode: Modeline "1280x800" 68.94 1280 1296
1344 1408 800 801 804 816
(WW) RADEONHD(0): No monitor size info, assuming 96dpi.
(II) RADEONHD(0): Query for AtomBIOS Get Panel EDID: failed
(II) RADEONHD(0): Found native mode: Modeline "1280x800" 68.94 1280 1296
1344 1408 800 801 804 816
(WW) RADEONHD(0): No monitor size info, assuming 96dpi.
| < Previous | Next > |