Mailinglist Archive: radeonhd (312 mails)

< Previous Next >
[radeonhd] 0x94C3:0x1092:0x0710: Diamond HD2400 PRO
  • From: Gene Heskett <gene.heskett@xxxxxxxxxxx>
  • Date: Thu, 09 Apr 2009 14:24:32 -0400
  • Message-id: <200904091424.32553.gene.heskett@xxxxxxxxxxx>
Problem:
-------------------------Xorg.0.log-snippets----------------
(--) RADEONHD(0): Detected an RV610 on an unidentified card
(II) RADEONHD(0): Mapped IO @ 0xfdde0000 to 0xb800e000 (size 0x00010000)
(II) RADEONHD(0): PCIE Card Detected
(II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location
(II) RADEONHD(0): ATOM BIOS Rom:
SubsystemVendorID: 0x1092 SubsystemID: 0x0710
IOBaseAddress: 0x6c00
Filename: SD303VTD.I1J
BIOS Bootup Message:
DM-HD610LG2-512

(II) RADEONHD(0): Analog TV Default Mode: 1
(II) RADEONHD(0): Found default TV Mode NTSC
(II) RADEONHD(0): The detected amount of videoram exceeds the PCI BAR
aperture.
(II) RADEONHD(0): Using only 262144kB of the total 524288kB.
(--) RADEONHD(0): VideoRAM: 262144 kByte
(II) RADEONHD(0): Framebuffer space used by Firmware (kb): 16
(II) RADEONHD(0): Start of VRAM area used by Firmware: 0x1fffc000
(II) RADEONHD(0): AtomBIOS requests 16kB of VRAM scratch space
(II) RADEONHD(0): AtomBIOS VRAM scratch base: 0x1fffc000
(WW) RADEONHD(0): rhdAtomAllocateFbScratch: FW FB scratch area 536854528
(size: 16384) extends beyond available framebuffer size 268435456
(II) RADEONHD(0): Cannot get VRAM scratch space. Allocating in main memory
instead
[...]
(WW) RADEONHD(0): Direct rendering for R600 and up forced on - This is NOT
officially supported yet and may cause instability or lockups
(II) RADEONHD(0): Found libdri 5.4.0.
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:03:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
[...]
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
(EE) RADEONHD(0): RHDDRIVersionCheck: drmOpen("radeon", "pci:0000:03:00.0")
failed.
(WW) RADEONHD(0): RHDDRIPreInit: Version check failed. Disabling DRI.
[...]
-----------------------
The kernel is 2.6.29.1-rc2, and dri is built in. It also fails when it is a
module.

And my screen scrolling is maddening slow, 2 lines of text at a time, with a
nearly full second of screen redraw per 2 lines scrolled. Cap that with about
a 100ms delay to keyboard repeat, and there have been times when a finger on
the up or down arrow wasn't released quick enough, and that screen was
unusable for a couple minutes when the scrolling finally got caught up with
the 100x/second keyboard repeat, which does not respond to setting it for half
a second and 5x a second in the bios, nor in the kconfig prefs.

Many Thanks for any help you can give me on this.

--
Cheers, Gene
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Yow! Now we can become alcoholics!

--
To unsubscribe, e-mail: radeonhd+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: radeonhd+help@xxxxxxxxxxxx

< Previous Next >
Follow Ups