Mailinglist Archive: radeonhd (330 mails)

[bugzilla-daemon@xxxxxxxxxxxxxxx]

http://bugs.freedesktop.org/show_bug.cgi?id=18232

           Summary: Regression (1.2.1->1.2.3): ddc does not return any
                    information
           Product: xorg
           Version: unspecified
          Platform: x86-64 (AMD64)
        OS/Version: Linux (All)
            Status: NEW
          Severity: normal
          Priority: medium
         Component: Driver/radeonhd
        AssignedTo: lverhaegen@xxxxxxx
        ReportedBy: roland.lezuo@xxxxxxxxx
         QAContact: xorg-team@xxxxxxxxxxx


Hi!

I've just notices a regression in radeonhd 1.2.3+git 15f0b2a8 regarding ddc. It
simply stopped working for me which just gives me some default modes.

from XOrg.0.log (full file attached):

<snip>
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux Debian (xorg-server 2:1.4.2-7)
Current Operating System: Linux center 2.6.26-1-amd64 #1 SMP Sat Oct 18
15:27:18 UTC 2008 x86_64
Build Date: 30 September 2008  03:57:43PM
<snap>
<snip>
(**) RADEONHD(0): Depth 24, (--) framebuffer bpp 32
(**) RADEONHD(0): Selected XAA 2D acceleration.
(II) RADEONHD(0): Unknown card detected: 0x71C2:0x18BC:0x2212.
        If - and only if - your card does not work or does not work optimally
        please contact radeonhd@xxxxxxxxxxxx to help rectify this.
        Use the subject: 0x71C2:0x18BC:0x2212: <name of board>
        and *please* describe the problems you are seeing
        in your message.
(--) RADEONHD(0): Detected an RV530 on an unidentified card
(II) RADEONHD(0): Mapped IO @ 0xfbe00000 to 0x7f1cc87fb000 (size 0x00010000)
(II) RADEONHD(0): AGP Card Detected
(II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location
(II) RADEONHD(0): ATOM BIOS Rom: 
        SubsystemVendorID: 0x18bc SubsystemID: 0x2212
        IOBaseAddress: 0xe000
        Filename: E6PRB3D2.H2H
        BIOS Bootup Message: 
RX1600PGA2-D3 H2H                                                           
<snap>
<snip>
(II) RADEONHD(0): Connector[0] {RHD_CONNECTOR_DVI, "DVI-I CRT1 DFP1",
RHD_DDC_0, RHD_HPD_0, { RHD_OUTPUT_DACA, RHD_OUTPUT_TMDSA } }
(II) RADEONHD(0): Connector[1] {RHD_CONNECTOR_TV, "SVIDEO TV1", RHD_DDC_NONE,
RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
(II) RADEONHD(0): Connector[2] {RHD_CONNECTOR_DVI, "DVI-I CRT2 DFP3",
RHD_DDC_1, RHD_HPD_1, { RHD_OUTPUT_DACB, RHD_OUTPUT_LVTMA } }
<snap>
<snip>
(II) RADEONHD(0): TMDS A: Sensed Output: DVI
(II) RADEONHD(0): I2C device "RHD I2C line 0:ddc2" registered at address 0xA0.
(II) RADEONHD(0): I2C device "RHD I2C line 0:ddc2" removed.
(II) RADEONHD(0): I2C device "RHD I2C line 1:ddc2" registered at address 0xA0.
(II) RADEONHD(0): I2C device "RHD I2C line 1:ddc2" removed.
(II) RADEONHD(0): TMDS A: Sensed Output: DVI
(II) RADEONHD(0): I2C device "RHD I2C line 0:ddc2" registered at address 0xA0.
(II) RADEONHD(0): I2C device "RHD I2C line 0:ddc2" removed.
(II) RADEONHD(0): I2C device "RHD I2C line 1:ddc2" registered at address 0xA0.
(II) RADEONHD(0): I2C device "RHD I2C line 1:ddc2" removed.
(II) RADEONHD(0): On Crtc 1 Setting 60.0 Hz Mode: Modeline "1280x768"   80.14 
1280 1344 1480 1680  768 769 772 795
None
(II) 3rd Button detected: disabling emulate3Button
</snap>

This is a debian unstable system and ddc monitor detection worked with 1.2.1.

regards
roland lezuo


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug.
_______________________________________________
xorg-team mailing list
xorg-team@xxxxxxxxxxx
http://lists.x.org/mailman/listinfo/xorg-team
-- 
To unsubscribe, e-mail: radeonhd+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: radeonhd+help@xxxxxxxxxxxx