Mailinglist Archive: radeonhd (300 mails)
| < Previous | Next > |
[radeonhd] 0x791E:0x1462:0x7327: K9AG Neo2-Digital (DVI-D timing output issue)
- From: Tomas Thiemel <thiemel@xxxxxxxxxx>
- Date: Thu, 8 May 2008 17:33:27 +0200
- Message-id: <200805081733.27967.thiemel@xxxxxxxxxx>
Hello,
recently I've bought new LG's LCD L1953TR with VGA+DVI-D connector.
Connection via VGA output/cable is OK, all modes and frequencies works fine.
Connection via DVI-D output/cable has some problems:
* 720x400 - L1953TR does not show anything (LCD swithes to "sleep mode")
* 640x480 - L1953TR shows picture for 5~7 seconds, then the screen is blank
for 3~5 seconds, than the picture for 5~7 seconds, and so on...xrandr -s 0
It seems like "timing" problem/issue, because in 640x480 there are some "bad
blinking pixels" - I saw those "bad blinking pixels" at graphic cards which
had too much overclocked memory chips.
Best regards,
Tomas Thiemel
e-mail: thiemel@xxxxxxxxxx
http://www.wifizabreh.net
****************************
MY HW/SW configuration:
****************************
krtek@krtecek ~ $ uname -a
Linux krtecek 2.6.24-gentoo-r7 #1 SMP PREEMPT Sun May 4 20:51:46 CEST 2008
x86_64 AMD Athlon(tm) 64 X2 Dual Core Processor 6400+ AuthenticAMD GNU/Linux
krtek@krtecek ~ $ xrandr
Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 1280 x 1280
VGA_1 disconnected
TV_SVIDEO disconnected
DVI-D_1 connected 1280x1024+0+0 338mm x 270mm
1280x1024 60.0*+ 59.9
1152x864 75.0
1024x768 74.9 75.1 60.0
832x624 74.6
800x600 75.0 74.9 60.3
640x480 75.0 74.4 60.0
720x400 70.1
krtek@krtecek ~ $ emerge --search radeonHD
Searching...
[ Results for search key : radeonHD ]
[ Applications found : 1 ]
* x11-drivers/xf86-video-radeonhd
Latest version available: 1.2.1
Latest version installed: 1.2.1
Size of files: 500 kB
Homepage: http://wiki.x.org/wiki/radeonhd
Description: Experimental Radeon HD video driver.
License: GPL-2
For Xorg.0.log see attached file
recently I've bought new LG's LCD L1953TR with VGA+DVI-D connector.
Connection via VGA output/cable is OK, all modes and frequencies works fine.
Connection via DVI-D output/cable has some problems:
* 720x400 - L1953TR does not show anything (LCD swithes to "sleep mode")
* 640x480 - L1953TR shows picture for 5~7 seconds, then the screen is blank
for 3~5 seconds, than the picture for 5~7 seconds, and so on...xrandr -s 0
It seems like "timing" problem/issue, because in 640x480 there are some "bad
blinking pixels" - I saw those "bad blinking pixels" at graphic cards which
had too much overclocked memory chips.
Best regards,
Tomas Thiemel
e-mail: thiemel@xxxxxxxxxx
http://www.wifizabreh.net
****************************
MY HW/SW configuration:
****************************
krtek@krtecek ~ $ uname -a
Linux krtecek 2.6.24-gentoo-r7 #1 SMP PREEMPT Sun May 4 20:51:46 CEST 2008
x86_64 AMD Athlon(tm) 64 X2 Dual Core Processor 6400+ AuthenticAMD GNU/Linux
krtek@krtecek ~ $ xrandr
Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 1280 x 1280
VGA_1 disconnected
TV_SVIDEO disconnected
DVI-D_1 connected 1280x1024+0+0 338mm x 270mm
1280x1024 60.0*+ 59.9
1152x864 75.0
1024x768 74.9 75.1 60.0
832x624 74.6
800x600 75.0 74.9 60.3
640x480 75.0 74.4 60.0
720x400 70.1
krtek@krtecek ~ $ emerge --search radeonHD
Searching...
[ Results for search key : radeonHD ]
[ Applications found : 1 ]
* x11-drivers/xf86-video-radeonhd
Latest version available: 1.2.1
Latest version installed: 1.2.1
Size of files: 500 kB
Homepage: http://wiki.x.org/wiki/radeonhd
Description: Experimental Radeon HD video driver.
License: GPL-2
For Xorg.0.log see attached file
| < Previous | Next > |