On Tue, Mar 18, 2008 at 12:27 PM, Matthias Hopf
On Mar 18, 08 11:36:02 -0400, Leif Gruenwoldt wrote:
$ xrandr --verbose --output DVI-D_1 --mode 1920x1200_a xrandr: cannot find mode 1920x1200_a
You can try xrandr --verbose --output DVI-D_1 --mode 0x62 instead.
$ xrandr Screen 0: minimum 320 x 200, current 1680 x 1050, maximum 3600 x 1200 VGA_1 disconnected PANEL connected 1680x1050+0+0 444mm x 277mm 1680x1050 59.9*+ DVI-D_1 connected 1680x1050+0+0 519mm x 324mm 1920x1200 60.0 + 1600x1200 59.9 1680x1050 59.9* 1600x1000 59.9 1280x1024 84.9 75.0 59.9 1280x960 59.9 1152x864 75.0 1152x720 59.9 1024x768 75.1 60.0 832x624 74.6 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 1920x1200_a (0x62) 154.0MHz h: width 1920 start 1968 end 2000 total 2080 skew 0 clock 74.0KHz v: height 1200 start 1203 end 1209 total 1235 clock 60.0Hz 1920x1200_b (0x63) 154.0MHz h: width 1920 start 1968 end 2000 total 2080 skew 0 clock 74.0KHz v: height 1200 start 1203 end 1209 total 1235 clock 60.0Hz $ xrandr --verbose --output DVI-D_1 --mode 0x62 xrandr: cannot find mode 0x62 I'll wait for Fedora 9 which will hopefully ship with X Server 1.5. Till then I'll manually set the modeline as described earlier in the thread in my xorg.conf. -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org