Mailinglist Archive: radeonhd (622 mails)

[Egbert Eich <eich@xxxxxxx>]

Hi!

You are using an RS690 which I'm working on currently.
It's not yet supported.

Cheers,
        Egbert.

xeb@xxxxxxx writes:
 > Hello!
 > Xorg.0.log:
 > (II) RADEONHD(0): Initializing INT10
 > (II) RADEONHD(0): Primary V_BIOS segment is: 0xc000
 > (**) RADEONHD(0): Depth 24, (--) framebuffer bpp 32
 > (--) RADEONHD(0): Detected an RS690 on a ATI Radeon X1250 for Asus/M2A-VM
 > (II) RADEONHD(0): Mapped IO at 0x2b1c1773d000 (size 0x00010000)
 > (II) RADEONHD(0): Getting BIOS copy from INT10
 > (II) RADEONHD(0): ATOM BIOS Rom: 
 >        SubsystemVendorID: 0x1043 SubsystemID: 0x826d
 >        IOBaseAddress: 0xde00
 >        Filename: BR25534A.bin
 >        BIOS Bootup Message: 
 > ATI Radeon Xpress ?1250? for Asus/M2A-VM                                    
 > 
 > (II) RADEONHD(0): Framebuffer space used by Firmware (kb): 19
 > (II) RADEONHD(0): Start of VRAM area used by Firmware: 134198272
 > (--) RADEONHD(0): VideoRAM: 131072 kByte
 > (II) RADEONHD(0): Framebuffer space used by Firmware (kb): 19
 > (II) RADEONHD(0): Start of VRAM area used by Firmware: 134198272
 > (II) RADEONHD(0): AtomBIOS requests 19kB of VRAM scratch space
 > (II) RADEONHD(0): AtomBIOS VRAM scratch base: 0x7ffb400
 > (WW) RADEONHD(0): rhdAtomBIOSAllocateFbScratch: FW FB scratch area not located 
 > at the end of VRAM. Scratch End: 0x7fff401 VRAM End: 0x8000000
 > (II) RADEONHD(0): Cannot get VRAM scratch space. Allocating in main memory 
 > instead
 > (II) RADEONHD(0): Default Engine Clock: 40000
 > (II) RADEONHD(0): Default Memory Clock: 20000
 > (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 120000
 > (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
 > (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Input: 1350
 > (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Input: 100
 > (II) RADEONHD(0): Maximum Pixel Clock: 40000
 > (II) RADEONHD(0): Reference Clock: 1432
 > (II) Loading sub module "i2c"
 > (II) LoadModule: "i2c"(II) Module "i2c" already built-in
 > (II) RADEONHD(0): Default Engine Clock: 40000
 > (II) RADEONHD(0): I2C bus "RHD I2C line 0" initialized.
 > (II) RADEONHD(0): Default Engine Clock: 40000
 > (II) RADEONHD(0): I2C bus "RHD I2C line 1" initialized.
 > (II) RADEONHD(0): Default Engine Clock: 40000
 > (II) RADEONHD(0): I2C bus "RHD I2C line 2" initialized.
 > (II) RADEONHD(0): Default Engine Clock: 40000
 > (II) RADEONHD(0): I2C bus "RHD I2C line 3" initialized.
 > (II) Loading sub module "ddc"
 > (II) LoadModule: "ddc"(II) Module "ddc" already built-in
 > (II) RADEONHD(0): I2C device "RHD I2C line 0:ddc2" registered at address 0xA0.
 > (II) RADEONHD(0): I2C device "RHD I2C line 0:ddc2" removed.
 > (II) RADEONHD(0): I2C device "RHD I2C line 1:ddc2" registered at address 0xA0.
 > (II) RADEONHD(0): I2C device "RHD I2C line 1:ddc2" removed.
 > (II) RADEONHD(0): I2C device "RHD I2C line 2:ddc2" registered at address 0xA0.
 > (II) RADEONHD(0): I2C device "RHD I2C line 2:ddc2" removed.
 > (II) RADEONHD(0): I2C device "RHD I2C line 3:ddc2" registered at address 0xA0.
 > (II) RADEONHD(0): I2C device "RHD I2C line 3:ddc2" removed.
 > (II) RADEONHD(0): Detected VGA mode.
 > (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
 > (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 120000
 > (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Input: 100
 > (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Input: 1350
 > (II) RADEONHD(0): Maximum Pixel Clock: 40000
 > (II) RADEONHD(0): Reference Clock: 1432
 > (--) RADEONHD(0): Attaching Output DAC B to Connector VGA
 > (--) RADEONHD(0): Attaching Output DAC A to Connector DVI-I
 > (EE) RADEONHD(0): RHDLVTMAInit: unhandled connector type: 2
 > (EE) RADEONHD(0): Failed to detect a connected monitor
 > (II) RADEONHD(0): Destroying DAC B
 > (II) RADEONHD(0): Destroying DAC A
 > (II) RADEONHD(0): I2C bus "RHD I2C line 0" removed.
 > (II) RADEONHD(0): I2C bus "RHD I2C line 1" removed.
 > (II) RADEONHD(0): I2C bus "RHD I2C line 2" removed.
 > (II) RADEONHD(0): I2C bus "RHD I2C line 3" removed.
 > (II) UnloadModule: "radeonhd"
 > (II) UnloadModule: "int10"
 > (II) Unloading /usr/lib/xorg/modules//libint10.so
 > (EE) Screen(s) found, but none have a usable configuration.
 > 
 > Fatal server error:
 > no screens found
 > 
 > 
 > conntest:
 > Checking connectors on 0x791E, 0x1043, 0x826D  (@01:05:00):
 >   Load Detection: RHD_OUTPUT_NONE 
 >   HotPlug: RHD_HPD_0
 >   DDC: RHD_DDC_NONE 
 >   LVDS Info:
 >        18bits, single link, LDI Panel found.
 >        Power Timing: 0x000, 0x000, 0x00, 0x00, 0x000
 >        Macro: 0x00000000, Clock Pattern: 0x0001
 > -- 
 > To unsubscribe, e-mail: radeonhd+unsubscribe@xxxxxxxxxxxx
 > For additional commands, e-mail: radeonhd+help@xxxxxxxxxxxx
 > 
-- 
To unsubscribe, e-mail: radeonhd+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: radeonhd+help@xxxxxxxxxxxx