Mailinglist Archive: radeonhd (622 mails)

[CK <ck74@xxxxxxxxxxxxx>]

Hi,

Thank you RadeonHD team for the updates first of all.

I have just tested most recent version. I noticed that monitor couldn't be detected and i though it didnt work again somehow. Then, i plugged in an external LCD monitor and it worked! :)

Here are conntest and xorg log.

Best regards,


##########################################################################

Checking connectors on 0x7210, 0x1025, 0x012E  (@01:00:00):
  Load Detection: RHD_OUTPUT_NONE
  HotPlug: RHD_HPD_NONE
  DDC: RHD_DDC_2
  LVDS Info:
        18bits, single link, LDI Panel found.
        Power Timing: 0xF9F, 0x000, 0x03, 0x19, 0x1F4
        Macro: 0x08A03E04, Clock Pattern: 0x0063

##########################################################################

(II) Setting vga for screen 0.
(II) Enabling PCI device
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
        compiled for 1.3.0, module version = 1.0.0
        ABI class: X.Org Video Driver, version 1.2
(II) RADEONHD(0): Initializing INT10
(II) RADEONHD(0): Primary V_BIOS segment is: 0xc000
(**) RADEONHD(0): Depth 24, (--) framebuffer bpp 32
(WW) RADEONHD(0): Unknown card detected: 0x7210:0x1025:0x012E.
        Your card might not work or might not work optimally.
        To rectify this, please contact radeonhd@xxxxxxxxxxxxx
        Include your X log, the full name of the device
        and the conntest (found in utils/conntest) output.
(--) RADEONHD(0): Detected an M71 on an unidentified card
(II) RADEONHD(0): Mapped IO at 0xb7f89000 (size 0x00010000)
(II) RADEONHD(0): Getting BIOS copy from INT10
(II) RADEONHD(0): ATOM BIOS Rom: 
        SubsystemVendorID: 0x1025 SubsystemID: 0x012e
        IOBaseAddress: 0x6000
        Filename: BR25236.BIN 
        BIOS Bootup Message: 
Acer Compal Acadia M71M 256M BIOS 2ch DDR2 480e/400m                        

(II) RADEONHD(0): Framebuffer space used by Firmware (kb): 20
(II) RADEONHD(0): Start of VRAM area used by Firmware: 134197248
(--) RADEONHD(0): VideoRAM: 131072 kByte
(II) RADEONHD(0): Framebuffer space used by Firmware (kb): 20
(II) RADEONHD(0): Start of VRAM area used by Firmware: 134197248
(II) RADEONHD(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEONHD(0): AtomBIOS VRAM scratch base: 0x7ffb000
(II) RADEONHD(0): Default Engine Clock: 48000
(II) RADEONHD(0): Default Memory Clock: 40000
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 110000
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Input: 1350
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Input: 100
(II) RADEONHD(0): Minimum Pixel Clock: 40000
(II) RADEONHD(0): Reference Clock: 2700
(EE) RADEONHD(0): rhdAtomExec: Cannot exec AtomBIOS: framebuffer not mapped
(EE) RADEONHD(0): rhdAtomExec: Cannot exec AtomBIOS: framebuffer not mapped
(EE) RADEONHD(0): rhdAtomExec: Cannot exec AtomBIOS: framebuffer not mapped
(EE) RADEONHD(0): rhdAtomExec: Cannot exec AtomBIOS: framebuffer not mapped
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module already built-in
(II) RADEONHD(0): Default Engine Clock: 48000
(II) RADEONHD(0): I2C bus "RHD I2C line 0" initialized.
(II) RADEONHD(0): Default Engine Clock: 48000
(II) RADEONHD(0): I2C bus "RHD I2C line 1" initialized.
(II) RADEONHD(0): Default Engine Clock: 48000
(II) RADEONHD(0): I2C bus "RHD I2C line 2" initialized.
(II) RADEONHD(0): Default Engine Clock: 48000
(II) RADEONHD(0): I2C bus "RHD I2C line 3" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module already built-in
(II) RADEONHD(0): I2C device "RHD I2C line 0:ddc2" registered at 
address 0xA0.
(II) RADEONHD(0): I2C device "RHD I2C line 0:ddc2" removed.
(II) RADEONHD(0): I2C device "RHD I2C line 1:ddc2" registered at 
address 0xA0.
(II) RADEONHD(0): I2C device "RHD I2C line 1:ddc2" removed.
(II) RADEONHD(0): I2C device "RHD I2C line 2:ddc2" registered at 
address 0xA0.
(II) RADEONHD(0): I2C device "RHD I2C line 2:ddc2" removed.
(II) RADEONHD(0): I2C device "RHD I2C line 3:ddc2" registered at 
address 0xA0.
(II) RADEONHD(0): I2C device "RHD I2C line 3:ddc2" removed.
(II) RADEONHD(0): Detected VGA mode.
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 110000
(II) RADEONHD(0): Connector[0] {RHD_CONNECTOR_VGA, "VGA CRT1", 
RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_DACA, RHD_OUTPUT_NONE } }
(II) RADEONHD(0): Connector[1] {RHD_CONNECTOR_PANEL, "PANEL LCD1", 
DDC_NONE, RHD_HPD_NONE, { RHD_OUTPUT_LVTMA, RHD_OUTPUT_NONE } }
(II) RADEONHD(0): Connector[2] {RHD_CONNECTOR_TV, "SVIDIO TV1", 
DDC_NONE, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
(II) RADEONHD(0): Connector[3] {RHD_CONNECTOR_DVI, "DVI-I DFP1", 
RHD_DDC_1, RHD_HPD_0, { RHD_OUTPUT_TMDSA, RHD_OUTPUT_NONE } }
(--) RADEONHD(0): Attaching Output DAC A to Connector VGA CRT1
(EE) RADEONHD(0): RHDLVTMAInit: no card information available. 
Bailing for now...
(--) RADEONHD(0): Attaching Output DAC B to Connector SVIDIO TV1
(--) RADEONHD(0): Attaching Output TMDS A to Connector DVI-I DFP1
(EE) RADEONHD(0): Failed to detect a connected monitor 
(II) RADEONHD(0): Destroying DAC A
(II) RADEONHD(0): Destroying DAC B
(II) RADEONHD(0): Destroying TMDS A
(II) RADEONHD(0): I2C bus "RHD I2C line 0" removed.
(II) RADEONHD(0): I2C bus "RHD I2C line 1" removed.
(II) RADEONHD(0): I2C bus "RHD I2C line 2" removed.
(II) RADEONHD(0): I2C bus "RHD I2C line 3" removed.
(II) UnloadModule: "radeonhd"
(II) UnloadModule: "int10"
(II) Unloading /usr/lib/xorg/modules//libint10.so
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

##########################################################################







-- 
_______________________________________________
Surf the Web in a faster, safer and easier way:
Download Opera 9 at http://www.opera.com

Powered by Outblaze
--
To unsubscribe, e-mail: radeonhd+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: radeonhd+help@xxxxxxxxxxxx