Mailinglist Archive: radeonhd (622 mails)

[raiden@xxxxxxxxxxxxxxxx]

I am just resubmitting a new RV530 card (ATI Sapphire X1600 8xAGP 512mb - 
PCIID: 0x71C2:0x174B:0x0850) to be added to the radeonhd driver. It has 
both a VGA+DVI output but only using the DVI output. I have redownloaded the latest driver from git (2 minutes) ago and here is the output at X.org

(II) RADEONHD(0): Initializing INT10
(II) RADEONHD(0): Primary V_BIOS segment is: 0xc000
(==) RADEONHD(0): Depth 16, (--) framebuffer bpp 16
(WW) RADEONHD(0): Unknown card detected: 0x71C2:0x174B:0x0850.
        Your card might not work or might not work optimally.
       To rectify this, please contact radeonhd@xxxxxxxxxxxxx
        Include your X log, the full name of the device
        and the conntest (found in utils/conntest) output.
(--) RADEONHD(0): Detected an RV530 on an unidentified card
(II) RADEONHD(0): Mapped IO at 0xb7bb5000 (size 0x00010000)
(II) RADEONHD(0): Getting BIOS copy from INT10
(II) RADEONHD(0): ATOM BIOS Rom:
        SubsystemVendorID: 0x174b SubsystemID: 0x0850
        IOBaseAddress: 0x9000
        Filename: 3C8501SA.005
        BIOS Bootup Message:
RV530 Rialto Test BIOS DDR2 500e/400m
(II) RADEONHD(0): Framebuffer space used by Firmware (kb): 20
(II) RADEONHD(0): Start of VRAM area used by Firmware: 134197248
(II) RADEONHD(0): The detected amount of videoram exceeds the PCI BAR aperture.
(II) RADEONHD(0): Using only 262144kB of the total 524288kB.
(--) RADEONHD(0): VideoRAM: 262144 kByte
(II) RADEONHD(0): Framebuffer space used by Firmware (kb): 20
(II) RADEONHD(0): Start of VRAM area used by Firmware: 134197248
(II) RADEONHD(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEONHD(0): AtomBIOS VRAM scratch base: 0x7ffb000
(WW) RADEONHD(0): rhdAtomBIOSAllocateFbScratch: FW FB scratch area not located at the end of VRAM. Scratch End: 0x8000000 VRAM End: 0x10000000
(II) RADEONHD(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEONHD(0): Default Engine Clock: 63500
(II) RADEONHD(0): Default Memory Clock: 50500
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 110000
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Input: 1350
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Input: 100
(II) RADEONHD(0): Minimum Pixel Clock: 40000
(II) RADEONHD(0): Reference Clock: 2700
(II) RADEONHD(0): rhdTestAtomBIOS: I2C channel 0 STATUS: 200
(II) RADEONHD(0): rhdTestAtomBIOS: I2C channel 1 STATUS: 0
(II) RADEONHD(0): rhdTestAtomBIOS: I2C channel 2 STATUS: 200
(II) RADEONHD(0): rhdTestAtomBIOS: I2C channel 3 STATUS: 200
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) RADEONHD(0): Default Engine Clock: 63500
(II) RADEONHD(0): I2C bus "RHD I2C line 0" initialized.
(II) RADEONHD(0): Default Engine Clock: 63500
(II) RADEONHD(0): I2C bus "RHD I2C line 1" initialized.
(II) RADEONHD(0): Default Engine Clock: 63500
(II) RADEONHD(0): I2C bus "RHD I2C line 2" initialized.
(II) RADEONHD(0): Default Engine Clock: 63500
(II) RADEONHD(0): I2C bus "RHD I2C line 3" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) RADEONHD(0): I2C device "RHD I2C line 0:ddc2" registered at address 0xA0.
(II) RADEONHD(0): I2C device "RHD I2C line 0:ddc2" removed.
(II) RADEONHD(0): I2C device "RHD I2C line 1:ddc2" registered at address 0xA0.
(II) RADEONHD(0): Found DDC on line 1:
(II) RADEONHD(0): Manufacturer: SNY  Model: bf00  Serial#: 16843009
(II) RADEONHD(0): Year: 2006  Week: 0
(II) RADEONHD(0): EDID Version: 1.3
(II) RADEONHD(0): Digital Display Input
(II) RADEONHD(0): Max H-Image Size [cm]: H-Size may change,  V-Size may change
(II) RADEONHD(0): Gamma: 2.20
(II) RADEONHD(0): No DPMS capabilities specified; RGB/Color Display
(II) RADEONHD(0): First detailed timing is preferred mode
(II) RADEONHD(0): redX: 0.637 redY: 0.321   greenX: 0.289 greenY: 0.601
(II) RADEONHD(0): blueX: 0.146 blueY: 0.081   whiteX: 0.285 whiteY: 0.294
(II) RADEONHD(0): Supported VESA Video Modes:
(II) RADEONHD(0): 720x400@70Hz
(II) RADEONHD(0): 640x480@60Hz
(II) RADEONHD(0): 800x600@60Hz
(II) RADEONHD(0): 1024x768@60Hz
(II) RADEONHD(0): Manufacturer's mask: 0
(II) RADEONHD(0): Supported Future Video Modes:
(II) RADEONHD(0): #0: hsize: 1152  vsize 648  refresh: 60  vid: 49265
(II) RADEONHD(0): #1: hsize: 1024  vsize 768  refresh: 60  vid: 16481
(II) RADEONHD(0): #2: hsize: 800  vsize 600  refresh: 60  vid: 16453
(II) RADEONHD(0): #3: hsize: 640  vsize 480  refresh: 60  vid: 16433
(II) RADEONHD(0): Supported additional Video Mode:
(II) RADEONHD(0): clock: 59.2 MHz   Image Size:  16 x 9 mm
(II) RADEONHD(0): h_active: 1152  h_sync: 1200  h_sync_end 1312 h_blank_end 1472 h_border: 0
(II) RADEONHD(0): v_active: 648  v_sync: 651  v_sync_end 656 v_blanking: 674 v_border: 0
(II) RADEONHD(0): Supported additional Video Mode:
(II) RADEONHD(0): clock: 68.2 MHz   Image Size:  16 x 9 mm
(II) RADEONHD(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1440 h_border: 0
(II) RADEONHD(0): v_active: 768  v_sync: 771  v_sync_end 778 v_blanking: 790 v_border: 0
(II) RADEONHD(0): Ranges: V min: 58  V max: 62 Hz, H min: 15  H max: 50 kHz,PixClock max 80 MHz
(II) RADEONHD(0): Monitor name: SONY TV
(II) RADEONHD(0): Number of EDID sections to follow: 1
(II) RADEONHD(0): EDID (in hex):
(II) RADEONHD(0):       00ffffffffffff004dd900bf01010101
(II) RADEONHD(0):       00100103800000780a13b1a3524a9925
(II) RADEONHD(0):       14494ba1080071c06140454031400101
(II) RADEONHD(0):       0101010101012517804041881a203070
(II) RADEONHD(0):       350010090000001ca91a00a050001630
(II) RADEONHD(0):       3020370010090000001a000000fd003a
(II) RADEONHD(0):       3e0f3208000a202020202020000000fc
(II) RADEONHD(0):       00534f4e592054560a20202020200127
(II) RADEONHD(0): I2C device "RHD I2C line 2:ddc2" registered at address 0xA0.
(II) RADEONHD(0): I2C device "RHD I2C line 2:ddc2" removed.
(II) RADEONHD(0): I2C device "RHD I2C line 3:ddc2" registered at address 0xA0.
(II) RADEONHD(0): I2C device "RHD I2C line 3:ddc2" removed.
(II) RADEONHD(0): Detected VGA mode.
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 110000
(II) RADEONHD(0): Connector[0] {RHD_CONNECTOR_VGA, "VGA CRT1", RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_DACA, RHD_OUTPUT_NONE } }
(II) RADEONHD(0): Connector[1] {RHD_CONNECTOR_TV, "SVIDIO TV1", DDC_NONE, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
(II) RADEONHD(0): Connector[2] {RHD_CONNECTOR_DVI, "DVI-I DFP1 CRT2", RHD_DDC_1, RHD_HPD_0, { RHD_OUTPUT_TMDSA, RHD_OUTPUT_DACB } }
(--) RADEONHD(0): Attaching Output DAC A to Connector VGA CRT1
(--) RADEONHD(0): Attaching Output DAC B to Connector SVIDIO TV1
(--) RADEONHD(0): Attaching Output TMDS A to Connector DVI-I DFP1 CRT2
(--) RADEONHD(0): Attaching Output DAC B to Connector DVI-I DFP1 CRT2
(EE) RADEONHD(0): Failed to detect a connected monitor
(II) RADEONHD(0): Destroying DAC A
(II) RADEONHD(0): Destroying DAC B
(II) RADEONHD(0): Destroying TMDS A
(II) RADEONHD(0): I2C bus "RHD I2C line 0" removed.
(II) RADEONHD(0): I2C device "RHD I2C line 1:ddc2" removed.
(II) RADEONHD(0): I2C bus "RHD I2C line 1" removed.
(II) RADEONHD(0): I2C bus "RHD I2C line 2" removed.
(II) RADEONHD(0): I2C bus "RHD I2C line 3" removed.
(II) UnloadModule: "radeonhd"
(II) UnloadModule: "int10"
(II) Unloading /usr/X11/lib/xorg/modules//libint10.so
(EE) Screen(s) found, but none have a usable configuration.


and running  rhd_conntest

# ./rhd_conntest 01:00.0
Checking connectors on 0x71C2, 0x174B, 0x0850  (@01:00:00):
  Load Detection: RHD_OUTPUT_TMDSA
  HotPlug: RHD_HPD_NONE
  DDC: RHD_DDC_1


Please add this card to the latest git plus please make this driver 
compatible with the latest xserver(from git). (pci-rework architecture)
--
To unsubscribe, e-mail: radeonhd+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: radeonhd+help@xxxxxxxxxxxx