Mailinglist Archive: radeonhd (622 mails)

[Ian Schram <ischram@xxxxxxxxxx>]

I had some spare time and i messed around, looking for things that could cause my odd conntests results,
and I discovered that the "count = 32" in R5xxI2CStatus(void *map) is Tooo small for it to detect my
DDC line. These are results with count set to 3200, I also tried to use these values in rhd_id.c, and
change the sleeps there too but to no avail just yet.

No monitor, just pannel
Checking connectors on 0x7145, 0x1025, 0x0094  (@01:00:00):
  Load Detection: RHD_OUTPUT_NONE
  HotPlug: RHD_HPD_NONE
  DDC: RHD_DDC_2
  LVDS Info:
        18bits, single link, LDI Panel found.
        Power Timing: 0xF9F, 0x000, 0x03, 0x19, 0x1F4
        Macro: 0x0C720407, Clock Pattern: 0x0063

vga monitor attached
Checking connectors on 0x7145, 0x1025, 0x0094  (@01:00:00):
  Load Detection: RHD_OUTPUT_DACA
  HotPlug: RHD_HPD_NONE
  DDC: RHD_DDC_0 RHD_DDC_2
  LVDS Info:
        18bits, single link, LDI Panel found.
        Power Timing: 0xF9F, 0x000, 0x03, 0x19, 0x1F4
        Macro: 0x0C720407, Clock Pattern: 0x0063

Anything more I can try?

Ian Schram wrote:
> It's an acer aspire notebook.Sold as 5672 wlmi iirc.
> the little sticker on the screen says 5670 though
> 
> lspci -vv
> 
> 
> 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility X1400 (prog-if 00 [VGA])
>         Subsystem: Acer Incorporated [ALI] Unknown device 0094
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 0, Cache Line Size: 64 bytes
>         Interrupt: pin A routed to IRQ 16
>         Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
>         Region 1: I/O ports at 2000 [size=256]
>         Region 2: Memory at c8100000 (32-bit, non-prefetchable) [size=64K]
>         [virtual] Expansion ROM at c8120000 [disabled] [size=128K]
>         Capabilities: [50] Power Management version 2
>                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [58] Express Legacy Endpoint IRQ 0
>                 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
>                 Device: Latency L0s <4us, L1 unlimited
>                 Device: AtnBtn- AtnInd- PwrInd-
>                 Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>                 Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>                 Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
>                 Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
>                 Link: Latency L0s <64ns, L1 <1us
>                 Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
>                 Link: Speed 2.5Gb/s, Width x16
>         Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
>                 Address: 0000000000000000  Data: 0000
> 
> 
> I also forgot to mention last time that it has a dvi and s-video out too, but i don't
> have the cables to connect them.Don't know what other information I can provide.
> 
> Ian
> 
> Luc Verhaegen wrote:
>> On Sat, Sep 22, 2007 at 02:02:20PM +0200, Ian Schram wrote:
>>> Card: Mobility X1400
>>> PCI ID: 1002:7145
>>> No X server loaded, No external cables connected
>>>
>>> Checking connectors on 0x7145, 0x1025, 0x0094  (@01:00:00):
>>>   Load Detection: RHD_OUTPUT_NONE
>>>   HotPlug: RHD_HPD_NONE
>>>   DDC: RHD_DDC_NONE
>>>   LVDS Info:
>>>         18bits, single link, LDI Panel found.
>>>         Power Timing: 0xF9F, 0x000, 0x03, 0x19, 0x1F4
>>>         Macro: 0x0C720407, Clock Pattern: 0x0063
>>>
>>> --------------------------------------------------------------
>>> when a vga cable is attached the DDC is also recognised.
>>>
>>> Checking connectors on 0x7145, 0x1025, 0x0094  (@01:00:00):
>>>   Load Detection: RHD_OUTPUT_DACA
>>>   HotPlug: RHD_HPD_NONE
>>>   DDC: RHD_DDC_0
>>>   LVDS Info:
>>>         18bits, single link, LDI Panel found.
>>>         Power Timing: 0xF9F, 0x000, 0x03, 0x19, 0x1F4
>>>         Macro: 0x0C720407, Clock Pattern: 0x0063
>>>
>>> ---------------------------------------------------------
>>> I have also attached my Xorg.0.log because the driver asked nicely ;-)
>>>
>>> -----------------
>>>
>>> If there's anything further don't hesitate to ask.
>>>
>> Can you provide more information about the board in question? The make 
>> and model of the laptop would also suffice.
>>
>> Thanks,
>>
>> Luc Verhaegen.
>> SUSE/Novell X Driver Developer.
>>
>>
-- 
To unsubscribe, e-mail: radeonhd+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: radeonhd+help@xxxxxxxxxxxx