Mailinglist Archive: radeonhd (400 mails)

[André-Sebastian Liebe <master-andre@xxxxxx>]

Hello, here are my data from an LG S1-MDGMG Laptop (LCD,VGA,TV-out)


lspci -s 01:00 -vvv
> 01:00.0 VGA compatible controller: ATI Technologies Inc M56P [Radeon >Mobility X1600] (prog-if 00 [VGA])
>        Subsystem: LG Electronics, Inc. Unknown device 0068
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0, Cache Line Size: 64 bytes
>        Interrupt: pin A routed to IRQ 10
>        Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
>        Region 1: I/O ports at 2000 [size=256]
>        Region 2: Memory at d8000000 (32-bit, non-prefetchable) [size=64K]
>        [virtual] Expansion ROM at d8020000 [disabled] [size=128K]
>        Capabilities: [50] Power Management version 2
>                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>        Capabilities: [58] Express Legacy Endpoint IRQ 0
>                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
>                Device: Latency L0s <4us, L1 unlimited
>                Device: AtnBtn- AtnInd- PwrInd-
>                Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>                Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
>                Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
>                Link: Latency L0s <64ns, L1 <1us
>                Link: ASPM L0s L1 Enabled RCB 64 bytes CommClk+ ExtSynch-
>                Link: Speed 2.5Gb/s, Width x16
>        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
>                Address: 0000000000000000  Data: 0000


only internal LCD:
> Checking connectors on 0x71C5, 0x1854, 0x0068  (@01:00:00):
>  Load Detection: RHD_OUTPUT_NONE 
>  HotPlug: RHD_HPD_NONE 
>  DDC: RHD_DDC_2
>  LVDS Info:
>        18bits, dual link, LDI Panel found.
>        Power Timing: 0xF9F, 0x000, 0x03, 0x19, 0x1F4
>        Macro: 0x0C720407, Clock Pattern: 0x0063

internal LCD + VGA:
> Checking connectors on 0x71C5, 0x1854, 0x0068  (@01:00:00):
>  Load Detection: RHD_OUTPUT_DACA
>  HotPlug: RHD_HPD_NONE 
>  DDC: RHD_DDC_0 RHD_DDC_2 RHD_DDC_3
>  LVDS Info:
>        18bits, dual link, LDI Panel found.
>        Power Timing: 0xF9F, 0x000, 0x03, 0x19, 0x1F4
>        Macro: 0x0C720407, Clock Pattern: 0x0063

PS: thanks for your work on the open source drivers!
-
André-Sebastian Liebe
--
To unsubscribe, e-mail: radeonhd+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: radeonhd+help@xxxxxxxxxxxx