Hi all, I tried the driver today on my Lenovo Thinkpad T60 (2007) with Radeon X1400 graphics adapter. It kind of works. I get a 1400x1050 Resolution on the internal LCD Screen, the external Monitor can only but handle 1280x1024 but displays something (a bit shifted and a bit smaller than the LCD). But i can only start X when the external monitor is connected. If not X fails to start (both logs are appended). It also breaks the VGA-Console after quitting X. I'm running Debian GNU/Linux (testing) with Xorg 7.3 from unstable. The output from conntest Without external Monitor: Checking connectors on 0x7145, 0x17AA, 0x2006 (@01:00:00): Load Detection: RHD_OUTPUT_NONE HotPlug: RHD_HPD_NONE DDC: RHD_DDC_2 LVDS Info: 18bits, dual link, LDI Panel found. Power Timing: 0x465, 0x00F, 0x10, 0x64, 0x2A8 Macro: 0x0B520407, Clock Pattern: 0x0063 With external Monitor connected through VGA Adapter Checking connectors on 0x7145, 0x17AA, 0x2006 (@01:00:00): Load Detection: RHD_OUTPUT_DACA HotPlug: RHD_HPD_NONE DDC: RHD_DDC_0 RHD_DDC_2 RHD_DDC_3 LVDS Info: 18bits, dual link, LDI Panel found. Power Timing: 0x465, 0x00F, 0x10, 0x64, 0x2A8 Macro: 0x0B520407, Clock Pattern: 0x0063 Here the output from lspci -vnn 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon Mobility X1400 [1002:7145] (prog-if 00 [VGA]) Subsystem: Lenovo Unknown device [17aa:2006] Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at d8000000 (32-bit, prefetchable) [size=128M] I/O ports at 2000 [size=256] Memory at ee100000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at ee120000 [disabled] [size=128K] Capabilities: [50] Power Management version 2 Capabilities: [58] Express Legacy Endpoint IRQ 0 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Hope this helps. Great work so far! Attached: The Xorg logs Greetings, Jörg :-) -- Jörg Kurlbaum (jkur@informatik.uni-bremen.de) Cartesium 04.015 GPG-ID: CAC40EA9 Enrique Schmidt Str. 5 T: 0421/218-64201 Universität Bremen