Mailinglist Archive: packet-writing (117 mails)

< Previous Next >
Re: Can't get packet-writing working
  • From: Rene Bartsch <rene@xxxxxxxxxxxxx>
  • Date: Wed, 3 Jul 2002 10:30:56 +0000 (UTC)
  • Message-id: <1025688901.1734.20.camel@xxxxxxxxxxxxxx>
I already booted without 'hdc=ide-scsi' and tried /dev/hdc, but same
result ...

Rene

Am Mit, 2002-07-03 um 09.33 schrieb Syam S.:
> Hi,
>
> I got the same errors. But, it worked when I stopped using the ide-scsi
> driver.
>
> On Wednesday 03 July 2002 01:38 am, Rene Bartsch wrote:
> > Hi,
> >
> > I'm trying for a month now, but with no success.
> >
> > First I tried with a patch for Mandrake8.2 which was made by Peter
> > Osterlund when I asked for - Thanks :o)
> >
> > Now I installed RedHat7.3 and used a 2.4.19-rc1-kernel from kernel.org
> > which was patched by me with packetcd-2.4.19-pre4-patch.
> >
> > I compiled both kernels with packetcd and UDF (writing enabled) as
> > module.
> >
> > Then I installed UDF-Tools 1.0.2b (./configure - make - make install).
> >
> > Did a modprobe -v pktcdvd.
> >
> > When I tried 'cdrwtool -d /dev/scd0 -q' (using IDE-SCSI, trying with a
> > CD-RW and a DVD-RW) I got the following message:
> >
> > ---------------- snip ------------------------------------------------
> >
> > [root@echelon root]# cdrwtool -d /dev/scd0 -q
> > using device /dev/scd0
> > 1238KB internal buffer
> > setting write speed to 12x
> > wait_cmd: Invalid argument
> > Command failed: 55 10 00 00 00 00 00 00 3c 00 00 00 - sense 05.26.00
> > 00 00 00 00 00 00 00 00 05 32 20 27 0a 00 00 00 20 00 00 00 00 20 00 96
> > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 00 00 00 00 00 00 00 00 00 00 08 00
> > mode_select: Illegal seek
> > set_write
> > [root@echelon root]#
> >
> > --------------- snap --------------------------------------------------
> >
> > DMESG of the cdrwtool-command:
> >
> > -------------- snip ---------------------------------------------------
> >
> > cdrom: This disc doesn't have any tracks I recognize!
> > sr0: CDROM (ioctl) reports ILLEGAL REQUEST.
> >
> > -------------- snap ---------------------------------------------------
> >
> >
> >
> > Trying mkuffs has the following result (independent wether pktsetup is
> > set or not) and doesn't create any DMESG:
> >
> >
> >
> > ---------------- snip -------------------------------------------------
> >
> > [root@echelon root]# mkudffs --media-type=cdrw /dev/pktcdvd0
> > trying to change type of multiple extents
> > [root@echelon root]#
> >
> > --------------- snap --------------------------------------------------
> >
> >
> > DMESG of 'pktsetup /dev/pktcdvd0 /dev/scd0':
> >
> > -------------- snip ---------------------------------------------------
> >
> > cdrom: This disc doesn't have any tracks I recognize!
> > pktcdvd: writer sr0 sucessfully registered
> >
> > -------------- snap ---------------------------------------------------
> >
> > Is 'sr0' right?
> >
> >
> > The writer is a PIONEER DVR-A03 (2x/1x/4 DVD-R/RW/ROM and 8x/4x/24
> > CD-R/RW/ROM)
> >
> > Any hints? Did I do something wrong?
> >
> > Thanxs for any help ...
> >
> > Rene



< Previous Next >
List Navigation
References