Mailinglist Archive: packet-writing (117 mails)

< Previous Next >
Re: Re: Re: Can't get packet-writing working
  • From: Mario Medina Nussbaum <medisoft@xxxxxxxxxxxxxxx>
  • Date: Fri, 5 Jul 2002 19:08:51 +0000 (UTC)
  • Message-id: <1025896430.2917.1.camel@xxxxxxxxxxxxxxxxxxxxx>
I think that the problem is when detecting the size of the disk. try to
say to cdrwtool a small size of the disk, like 500mb instead of the
other size....


On Fri, 2002-07-05 at 01:19, Alexander Trotsai wrote:

yes
I can use packet writing drivers with already formated discs
and cdrecord told that it can
blackhole# cdrecord -checkdrive
Cdrecord 1.11a22 (i686-pc-linux-gnu) Copyright (C) 1995-2002
JЖrg Schilling
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.6'
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : '_NEC '
Identifikation : 'NR-7900A '
Revision : '1.23'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
blackhole#


On Thu, Jul 04, 2002 at 03:52:52PM -0500, Mario Medina Nussbaum wrote:
MMN>
MMN> your cd-rw unit supports packet writing?
MMN> On Thu, 2002-07-04 at 02:07, Alexander Trotsai wrote:
MMN>
MMN>I have same troubles
MMN>But cdrecord work OK
MMN>
MMN>blackhole# cdrwtool -d /dev/sg0 -q
MMN>using device /dev/sg0
MMN>set_options
MMN>can't unlock door
MMN>blackhole# cdrwtool -d /dev/scd0 -q
MMN>using device /dev/scd0
MMN>1206KB internal buffer
MMN>setting write speed to 12x
MMN>Settings for /dev/scd0:
MMN> Fixed packets, size 32
MMN> Mode-2 disc
MMN>
MMN>I'm going to do a quick setup of /dev/scd0. The disc is
MMN>going to be blanked and formatted with one big track. All
MMN>data on the device will be lost!! Press CTRL-C to cancel
MMN>now.
MMN>ENTER to continue.
MMN>
MMN>Initiating quick disc blank
MMN>wait_cmd: Input/output error
MMN>Command failed: a1 01 00 00 00 00 00 00 00 00 00 00 - sense
MMN>03.73.03
MMN>blank disc: Illegal seek
MMN>blackhole# uname -a
MMN>Linux blackhole.adamant.net 2.4.19-rc1 #3 Срд Июл 3 11:30:31
MMN>EEST 2002 i686 unknown (now rc-aa1, but with rc1 same
MMN>problem)
MMN>
MMN>On Wed, Jul 03, 2002 at 12:44:30PM -0500, Mario Medina Nussbaum wrote:
MMN>MMN>
MMN>MMN> just a question: you can write cd-rw with cdrecord???
MMN>MMN> On Wed, 2002-07-03 at 04:34, Rene Bartsch wrote:
MMN>MMN>
MMN>MMN>I already booted without 'hdc=ide-scsi' and tried /dev/hdc, but same
MMN>MMN>result ...
MMN>MMN>
MMN>MMN>Rene
MMN>MMN>
MMN>MMN>Am Mit, 2002-07-03 um 09.33 schrieb Syam S.:
MMN>MMN>> Hi,
MMN>MMN>>
MMN>MMN>> I got the same errors. But, it worked when I stopped using the ide-scsi
MMN>MMN>> driver.
MMN>MMN>>
MMN>MMN>> On Wednesday 03 July 2002 01:38 am, Rene Bartsch wrote:
MMN>MMN>> > Hi,
MMN>MMN>> >
MMN>MMN>> > I'm trying for a month now, but with no success.
MMN>MMN>> >
MMN>MMN>> > First I tried with a patch for Mandrake8.2 which was made by Peter
MMN>MMN>> > Osterlund when I asked for - Thanks :o)
MMN>MMN>> >
MMN>MMN>> > Now I installed RedHat7.3 and used a 2.4.19-rc1-kernel from kernel.org
MMN>MMN>> > which was patched by me with packetcd-2.4.19-pre4-patch.
MMN>MMN>> >
MMN>MMN>> > I compiled both kernels with packetcd and UDF (writing enabled) as
MMN>MMN>> > module.
MMN>MMN>> >
MMN>MMN>> > Then I installed UDF-Tools 1.0.2b (./configure - make - make install).
MMN>MMN>> >
MMN>MMN>> > Did a modprobe -v pktcdvd.
MMN>MMN>> >
MMN>MMN>> > When I tried 'cdrwtool -d /dev/scd0 -q' (using IDE-SCSI, trying with a
MMN>MMN>> > CD-RW and a DVD-RW) I got the following message:
MMN>MMN>> >
MMN>MMN>> > ---------------- snip ------------------------------------------------
MMN>MMN>> >
MMN>MMN>> > [root@echelon root]# cdrwtool -d /dev/scd0 -q
MMN>MMN>> > using device /dev/scd0
MMN>MMN>> > 1238KB internal buffer
MMN>MMN>> > setting write speed to 12x
MMN>MMN>> > wait_cmd: Invalid argument
MMN>MMN>> > Command failed: 55 10 00 00 00 00 00 00 3c 00 00 00 - sense 05.26.00
MMN>MMN>> > 00 00 00 00 00 00 00 00 05 32 20 27 0a 00 00 00 20 00 00 00 00 20 00 96
MMN>MMN>> > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
MMN>MMN>> > 00 00 00 00 00 00 00 00 00 00 08 00
MMN>MMN>> > mode_select: Illegal seek
MMN>MMN>> > set_write
MMN>MMN>> > [root@echelon root]#
MMN>MMN>> >
MMN>MMN>> > --------------- snap --------------------------------------------------
MMN>MMN>> >
MMN>MMN>> > DMESG of the cdrwtool-command:
MMN>MMN>> >
MMN>MMN>> > -------------- snip ---------------------------------------------------
MMN>MMN>> >
MMN>MMN>> > cdrom: This disc doesn't have any tracks I recognize!
MMN>MMN>> > sr0: CDROM (ioctl) reports ILLEGAL REQUEST.
MMN>MMN>> >
MMN>MMN>> > -------------- snap ---------------------------------------------------
MMN>MMN>> >
MMN>MMN>> >
MMN>MMN>> >
MMN>MMN>> > Trying mkuffs has the following result (independent wether pktsetup is
MMN>MMN>> > set or not) and doesn't create any DMESG:
MMN>MMN>> >
MMN>MMN>> >
MMN>MMN>> >
MMN>MMN>> > ---------------- snip -------------------------------------------------
MMN>MMN>> >
MMN>MMN>> > [root@echelon root]# mkudffs --media-type=cdrw /dev/pktcdvd0
MMN>MMN>> > trying to change type of multiple extents
MMN>MMN>> > [root@echelon root]#
MMN>MMN>> >
MMN>MMN>> > --------------- snap --------------------------------------------------
MMN>MMN>> >
MMN>MMN>> >
MMN>MMN>> > DMESG of 'pktsetup /dev/pktcdvd0 /dev/scd0':
MMN>MMN>> >
MMN>MMN>> > -------------- snip ---------------------------------------------------
MMN>MMN>> >
MMN>MMN>> > cdrom: This disc doesn't have any tracks I recognize!
MMN>MMN>> > pktcdvd: writer sr0 sucessfully registered
MMN>MMN>> >
MMN>MMN>> > -------------- snap ---------------------------------------------------
MMN>MMN>> >
MMN>MMN>> > Is 'sr0' right?
MMN>MMN>> >
MMN>MMN>> >
MMN>MMN>> > The writer is a PIONEER DVR-A03 (2x/1x/4 DVD-R/RW/ROM and 8x/4x/24
MMN>MMN>> > CD-R/RW/ROM)
MMN>MMN>> >
MMN>MMN>> > Any hints? Did I do something wrong?
MMN>MMN>> >
MMN>MMN>> > Thanxs for any help ...
MMN>MMN>> >
MMN>MMN>> > Rene
MMN>MMN>
MMN>MMN>
MMN>MMN>
MMN>MMN>--
MMN>MMN>To unsubscribe, e-mail: packet-writing-unsubscribe@xxxxxxxx
MMN>MMN>For additional commands, e-mail: [1]packet-writing-help@xxxxxxxx
MMN>MMN>
MMN>MMN>Ссылки
MMN>MMN>
MMN>MMN> 1. mailto:packet-writing-help@xxxxxxxx
MMN>
MMN>--
MMN>Best regard, Alexander Trotsai aka MAGE-RIPE aka MAGE-UANIC
MMN>My PGP at ftp://blackhole.adamant.net/pgp/trotsai.key[.asc]
MMN>Big trouble - PCMCIA slave driver

--
Best regard, Alexander Trotsai aka MAGE-RIPE aka MAGE-UANIC
My PGP at ftp://blackhole.adamant.net/pgp/trotsai.key[.asc]
Big trouble - Someone's tie is caught in the printer, and if anything else gets printed, he'll be in it too.

--
To unsubscribe, e-mail: packet-writing-unsubscribe@xxxxxxxx
For additional commands, e-mail: packet-writing-help@xxxxxxxx

< Previous Next >
List Navigation