Mailinglist Archive: packet-writing (117 mails)

< Previous Next >
Re: Can't get packet-writing working
  • From: Mario Medina Nussbaum <medisoft@xxxxxxxxxxxxxxx>
  • Date: Sat, 6 Jul 2002 17:45:38 +0000 (UTC)
  • Message-id: <1025977023.19448.7.camel@xxxxxxxxxxxxxxxxx>
once i did a format by "hand", executing cdrwtool -d /dev/sr0 -b to
blank the disk, then used -m option with the size i wish of the track in
sectors to format, and finally i used mkudffs /dev/sr0 (or mke2fs or
another filesystem)

This because my old cdwriter doesn't detect the right size of the disks.


cdrwtool --help
--help
d device
s set write parameters
g get write parameters
b blank cdrw disc
m format cdrw disc
u run mkudffs on track
v set mkudffs version
t set cd writing speed
p write fixed packets
q perform quick setup
r reserve track
c close track
z fixed packet size
l border/session setting
w write type
f file to write
o start at this lba for file write
i print detailed disc info



On Fri, 2002-07-05 at 20:05, Rene Bartsch wrote:
> I just initialized a CD-RW with cdrwtool on my old SCSI-writer and put
> it into the DVR-A03 - it worked now! So it's just that lack of
> firmware-support for quickformat.
>
> Is there any way to do a full, non-firmware-based initialize with
> cdrwtool?
>
> Rene
>
>
> Am Fre, 2002-07-05 um 23.02 schrieb Rene Bartsch:
> > I've put my old SCSI-CD-R(W) (Sony CRX-140S-RP 8x/4x/32x) into my server
> > to test it. I works well with the same CD-RW, but it's slow
> > (approximately 90 Kbyte/s).
> >
> > I think the problem is initializing with cdrwtool. Probably the PIONEER
> > DVR-A03 does not support quick-format by firmware but only by software
> > (c't claims that problem solved with new DVR-A04).
> >
> > But I've read there'd be a firmware-update, which seems to be quite
> > unstable. I'm going to check that.
> >
> > Rene
> >
> >
> > Am Fre, 2002-07-05 um 22.46 schrieb Pere Pujal Carabantes:
> > > On dc, 2002-07-03 at 00:08, Mario Medina Nussbaum wrote:
> > > > try with /dev/sg0 instead of /dev/scd0
> > > >
> > > >
> > > > On Tue, 2002-07-02 at 16:38, Rene Bartsch wrote:
> > > >
> > >
> > > >
> > > > DMESG of the cdrwtool-command:
> > > >
> > > > -------------- snip ---------------------------------------------------
> > > >
> > > > cdrom: This disc doesn't have any tracks I recognize!
> > > > sr0: CDROM (ioctl) reports ILLEGAL REQUEST.
> > > >
> > > > -------------- snap ---------------------------------------------------
> > > >
> > > I have same problem whith Vervatim DataLifePlus Hi-Speed CDRWs, but
> > > works fine whith other Verbatim non Hi-Speed
> > >
> > > > Thanxs for any help ...
> > > >
> > > > Rene
> > >
> > > Hope it helps
> > >
> > > Pere
> > >
> > > --
> > > To unsubscribe, e-mail: packet-writing-unsubscribe@xxxxxxxx
> > > For additional commands, e-mail: packet-writing-help@xxxxxxxx
> >
> >
> >
> > --
> > To unsubscribe, e-mail: packet-writing-unsubscribe@xxxxxxxx
> > For additional commands, e-mail: packet-writing-help@xxxxxxxx
>
>
>
> --
> To unsubscribe, e-mail: packet-writing-unsubscribe@xxxxxxxx
> For additional commands, e-mail: packet-writing-help@xxxxxxxx



< Previous Next >
List Navigation