-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I'm testing my new "server". I got an MSI Cubi N-020BEU. It's got an Intel Braswell N 3710, 1.66GHz CPU, connected to a Samsung TV via HDMI cable. Leap 42.2 running XFCE. Left running all night to check, but display powered off. This morning it would not respond to the keyboard.The TV said there was no signal in the cable. Via ssh did not see load on CPU nor messages. I killed xscreensaver. [...] Oops. Wrong. ssh was on the wrong computer :-/ I disconnected the video cable, then connected again. ctrl-alt-f1 and back. Nothing. Then ctrl-alt-backspace. Got login prompt. Not nice. I have disabled for now screen power saving features. Ideas? I suspect xscreensaver. I have to try again with it on remote. Isengard:~ # hwinfo --monitor --gfxcard --framebuffer 08: PCI 02.0: 0300 VGA compatible controller (VGA) [Created at pci.378] Unique ID: _Znp.qslZ+SExVcE SysFS ID: /devices/pci0000:00/0000:00:02.0 SysFS BusID: 0000:00:02.0 Hardware Class: graphics card Device Name: "Onboard IGD" Model: "Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x22b1 "Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller" SubVendor: pci 0x1462 "Micro-Star International Co., Ltd. [MSI]" SubDevice: pci 0xb120 Revision: 0x35 Driver: "i915" Driver Modules: "drm" Memory Range: 0x80000000-0x80ffffff (rw,non-prefetchable) Memory Range: 0x90000000-0x9fffffff (ro,non-prefetchable) I/O Ports: 0xf000-0xf03f (rw) IRQ: 123 (6257765 events) Module Alias: "pci:v00008086d000022B1sv00001462sd0000B120bc03sc00i00" Driver Info #0: Driver Status: i915 is active Driver Activation Cmd: "modprobe i915" Config Status: cfg=no, avail=yes, need=no, active=unknown 21: None 00.0: 10002 LCD Monitor [Created at monitor.125] Unique ID: rdCR.RysAyeVxkx7 Parent ID: _Znp.qslZ+SExVcE Hardware Class: monitor Model: "SAMSUNG T22C350" Vendor: SAM "SAMSUNG" Device: eisa 0x0ab9 "T22C350" Resolution: 720x400@70Hz Resolution: 640x480@60Hz Resolution: 640x480@67Hz Resolution: 640x480@72Hz Resolution: 640x480@75Hz Resolution: 800x600@60Hz Resolution: 800x600@72Hz Resolution: 800x600@75Hz Resolution: 832x624@75Hz Resolution: 1024x768@60Hz Resolution: 1024x768@70Hz Resolution: 1024x768@75Hz Resolution: 1280x1024@75Hz Resolution: 1152x864@75Hz Resolution: 1280x720@60Hz Resolution: 1280x1024@60Hz Resolution: 1366x768@60Hz Resolution: 1920x1080@60Hz Size: 477x268 mm Year of Manufacture: 2012 Week of Manufacture: 52 Detailed Timings #0: Resolution: 1920x1080 Horizontal: 1920 2008 2052 2200 (+88 +132 +280) +hsync Vertical: 1080 1084 1089 1125 (+4 +9 +45) +vsync Frequencies: 148.50 MHz, 67.50 kHz, 60.00 Hz Year of Manufacture: 2012 Week of Manufacture: 52 Detailed Timings #1: Resolution: 1366x768 Horizontal: 1366 1436 1579 1792 (+70 +213 +426) +hsync Vertical: 768 771 774 798 (+3 +6 +30) +vsync Frequencies: 85.50 MHz, 47.71 kHz, 59.79 Hz Driver Info #0: Max. Resolution: 1920x1080 Vert. Sync Range: 24-75 Hz Hor. Sync Range: 15-81 kHz Bandwidth: 148 MHz Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #8 (VGA compatible controller) Isengard:~ # - -- Cheers Carlos E. R. (from 13.1 x86_64 "Bottle" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iEYEARECAAYFAlg6zWEACgkQtTMYHG2NR9UALgCfRoNPd+FdtsdXQ/hUItXJgBOk 5rAAn3NKS1Cfu3yaMihFasR52/JC6B1Z =Nz8e -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org