this printer is currently branched on an usb port with cable, direct connection, no hub. I tried change of usb, hub, no hub, change controller usb nothing. In tumbleweed on the same machine that works. Anybody knows how to debug this? I did install the debug package, if somebody knows why or how to put cups in debug mode please tell. This is the log of cups: D [04/Feb/2016:20:21:53 +0100] [Job 36] Device protocol: 2 D [04/Feb/2016:20:21:53 +0100] [Job 36] Sending data to printer. D [04/Feb/2016:20:21:53 +0100] [Job 36] Sent 0 bytes... D [04/Feb/2016:20:21:53 +0100] [Job 36] Waiting for read thread to exit... D [04/Feb/2016:20:21:53 +0100] [Job 36] pstopdf 6 args: 36 root YaST2testprint_SalvadorDali 1 finishings=3 number-up=1 page-label=SalvadorDali:YaST2testprint@linux-xmzn job-uuid=urn:uuid:7130c6ac-c2ae-354c-5414-261c3ec9a8ac job-originating-host-name=localhost time-at-creation=1454613705 time-at-processing=1454613705 /var/spool/cups/d00036-001 D [04/Feb/2016:20:21:53 +0100] [Job 36] PPD: /etc/cups/ppd/SalvadorDali.ppd D [04/Feb/2016:20:21:53 +0100] [Job 36] Resolution: 600x600 D [04/Feb/2016:20:21:53 +0100] [Job 36] Orientation requested: 0 D [04/Feb/2016:20:21:53 +0100] [Job 36] Page size: A4 D [04/Feb/2016:20:21:53 +0100] [Job 36] Width: 595, height: 842, absolute margins: 18, 36, 577, 806 D [04/Feb/2016:20:21:53 +0100] [Job 36] Relative margins: 18, 36, 18, 36 D [04/Feb/2016:20:21:53 +0100] [Job 36] PPD options: -r600 -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=842 D [04/Feb/2016:20:21:53 +0100] [Job 36] PostScript to be injected: >setpagedevice D [04/Feb/2016:20:21:53 +0100] [Job 36] Running cat | /usr/bin/gs -q -dNOPAUSE -dBATCH -sDEVICE=pdfwrite -dCompatibilityLevel=1.3 -dAutoRotatePages=/None -dAutoFilterColorImages=false -dNOPLATFONTS -dPARANOIDSAFER -dNOINTERPOLATE -sstdout=%stderr -dColorImageFilter=/FlateEncode -dPDFSETTINGS=/printer -dUseCIEColor -dColorConversionStrategy=/LeaveColorUnchanged -dDoNumCopies -r600 -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=842 -sOutputFile=- -c >setpagedevice .setpdfwrite -f - D [04/Feb/2016:20:21:53 +0100] [Job 36] GPL Ghostscript 9.15: D [04/Feb/2016:20:21:53 +0100] [Job 36] Use of -dUseCIEColor detected! D [04/Feb/2016:20:21:53 +0100] [Job 36] Since the release of version 9.11 of Ghostscript we recommend you do not set D [04/Feb/2016:20:21:53 +0100] [Job 36] -dUseCIEColor with the pdfwrite/ps2write device family. D [04/Feb/2016:20:21:53 +0100] [Job 36] GPL Ghostscript 9.15: D [04/Feb/2016:20:21:53 +0100] [Job 36] Use of -dUseCIEColor detected! D [04/Feb/2016:20:21:53 +0100] [Job 36] Since the release of version 9.11 of Ghostscript we recommend you do not set D [04/Feb/2016:20:21:53 +0100] [Job 36] -dUseCIEColor with the pdfwrite/ps2write device family. D [04/Feb/2016:20:21:53 +0100] [Job 36] PID 4973 (/usr/lib/cups/filter/pstopdf) exited with no errors. D [04/Feb/2016:20:21:53 +0100] [Job 36] PID 4974 (/usr/lib/cups/filter/pdftopdf) did not catch or ignore signal 13. D [04/Feb/2016:20:21:53 +0100] [Job 36] Read thread still active, aborting the pending read... D [04/Feb/2016:20:21:53 +0100] [Job 36] PID 4976 (/usr/lib/cups/backend/usb) exited with no errors. D [04/Feb/2016:20:21:53 +0100] [Job 36] End of messages D [04/Feb/2016:20:21:53 +0100] [Job 36] printer-state=3(idle) D [04/Feb/2016:20:21:53 +0100] [Job 36] printer-state-message="Sending data to printer." D [04/Feb/2016:20:21:53 +0100] [Job 36] printer-state-reasons=none This is a network enabled printer using normally ppd. I think this is fruit of some changement to the pdf format. I have the same machine with tumbleweed and it prints fine. So it must be something that in tumbleweed is handled differently. (same printer, same usb cable). Ideas? P.S. I tried then the non foomatic driver. That gives an error as follows: W [04/Feb/2016:21:01:47 +0100] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files W [04/Feb/2016:21:01:47 +0100] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files W [04/Feb/2016:21:01:50 +0100] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files W [04/Feb/2016:21:01:50 +0100] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files W [04/Feb/2016:21:01:50 +0100] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files and so on and so forth. I succeeded with one page print after installing all ghostscript files and driver forcibly again. --- Alle Postfächer an einem Ort. Jetzt wechseln und E-Mail-Adresse mitnehmen! http://email.freenet.de/basic/Informationen -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org