On 29/06/14 16:20, Constant Brouerius van Nidek wrote:
Since some days I had problems to connect with the internet. After checking the net speed and the line quality with the pingtest of Ookla I found that the computer I always use had a line quality between D and F. According to the test side barely usable for a lot of programms. (computer C)
Did run the test also on a reserve set with a fully updated Tumbleweed and much to my surprise with that machine I have a very good line quality A or B. (computer A)
Having a notebook with (not fully updated) Tumbleweed gave me a surprise C line quality. (computer B)
All computers are connected to the same router. Cable length same.
With every repeat of the ping test the results are same. All connectors are clean and according to my logic, the results of all three computers should be same.
Could some body come up with the reason or reasons for this troubling result.
Details of the computers:
A) Desktop Computer 1, Line quality A or B, has a dual core Intel Pentium D, CPU 3,40 GHz, Network card PRO/100 VE Network connection (eth0)
B) Notebook Computer , Line quality C, dual core ATOM CPU N270, 1,6 GHZ, Network card Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controler (enp3s0)
C) Desktop Computer, line quality D, E, F, Intel Pentium 4 CPU 1,80 GHZ Network card RTL-8139/8139C/8139C+ (enp1s5)
Opensuse Tumbleweed was freshly setup on A and B. Computer C was updated from 12.3.
What wonders me is why computer A is still using the old eth0 and both computers with worse line quality are using the new name setting.
Really need the help of the list to pin down the reason of my problem before I start working on the mechanics of the machines.
Hi James, Let me relate this to you and you can then make up your own mind. But to begin, you did not mention if you conducted your tests all at the same time or were they spread over a period of, say, days or even hours. I have ADSL2+ and my modem/router is some 5-6 kms away (measured by wire-length) from the 'exchange which, therefore, cannot possibly provide me with the theoretical max. 24Mbps broadband speed. For years I was only getting nothing better than ~2X the dial-up speed and even though I had the phone/modem-router checked and replaced, that's the speed I got. And, of course, if the phone line was congested or the links from my ISP to where I was pointing my Firefox at were overloaded or were having one of those famous "outages" then my thruput dropped dramatically. Now comes the revelation :-) . A couple of years ago there was a bad noise problem on the phone line so bad that one couldn't even hold a conversation over the phone. You can imagine what effect this had on the ADSL2+ connection! I checked ALL of my gear in the house - the phones, the modem, the filters on the phone line for the ADSL2+ connection - and they were all perfect. I had to do this because our telco, Telstra, charges you $$$$ for being called out and only to find that the fault is caused by YOUR equipment and not theirs. And this is when a miracle happened! A Testra contractor (everything is now outsourced dontcha know) arrived; a young Czech. or a Hungarian, don't know which and didn't ask, and not one of the "local lads" and he spent some time in getting the phone line fixed. And you know what? He fixed the line so that now it is capable of getting the theoretical thruput for ADSL2+ for my distance from the exchange, and then just a tad more! All the other "local lads" sent out to fix OTHER PEOPLE's problems, living in the area and connected to this group of phone lines, in the past were grabbing and swapping over MY phone line to get those other people out of trouble and leaving me with crap. So this is part one of the story. The other is that a (?)couple of days ago my thruput dropped down to ~7BYTES/s when I went "surfing" to the rest of the world. I think that it was yesterday that I read that the BT had an outage for which it apologised to all and sundry. In other words, "S*** happens" and the speed can vary from day to day, from hour to hour, from minute to minute. BC -- Using openSUSE 13.1, KDE 4.13.2 & kernel 3.15.1-2 on a system with- AMD FX 8-core 3.6/4.2GHz processor 16GB PC14900/1866MHz Quad Channel RAM Gigabyte AMD3+ m/board; Gigabyte nVidia GTX660 GPU -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org