ellanios82 wrote:
[ 1.844645] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action [ 0x6 1.844784] ata1.01: BMDMA stat 0x44 [ 1.844858] ata1.01: failed command: READ DMA [ 1.844942] ata1.01: cmd c8/00:08:00:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in [ 1.844942] res 51/84:00:00:00:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error) [ 1.845230] ata1.01: status: { DRDY ERR } [ 1.845305] ata1.01: error: { ICRC ABRT } [ 1.845403] ata1: soft resetting link [ 2.128603] ata1.01: configured for UDMA/33 [ 2.128610] sd 0:0:1:0: [sda] [ 2.128612] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 2.128614] sd 0:0:1:0: [sda] [ 0.907216] ACPI: Invalid Power Resource to register! [ 2.128616] Sense Key : Aborted Command [current] [descriptor] [ 2.128619] Descriptor sense data with sense descriptors (in hex): [ 2.128621] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 2.128631] 00 00 00 00 [ 2.128635] sd 0:0:1:0: [sda] [ 2.128638] Add. Sense: Scsi parity error [ 2.128641] sd 0:0:1:0: [sda] CDB: [ 2.128642] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 2.128651] end_request: I/O error, dev sda, sector 0 [ 2.128763] Buffer I/O error on device sda, logical block 0 [ 2.128874] ata1: EH complete [ 3.068332] ata1.01: limiting speed to UDMA/25:PIO4 [ 3.068335] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action [ 0x6 3.068471] ata1.01: BMDMA stat 0x44 [ 3.068546] ata1.01: failed command: READ DMA [ 3.068629] ata1.01: cmd c8/00:08:00:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in [ 3.068629] res 51/84:00:00:00:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error) [ 3.068904] ata1.01: status: { DRDY ERR } [ 3.068979] ata1.01: error: { ICRC ABRT } [ 3.069083] ata1: soft resetting link [ 3.352292] ata1.01: configured for UDMA/25 [ 3.352298] sd 0:0:1:0: [sda] [ 3.352300] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 3.352302] sd 0:0:1:0: [sda] [ 3.352303] Sense Key : Aborted Command [current] [descriptor] [ 3.352306] Descriptor sense data with sense descriptors (in hex): [ 3.352308] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 3.352317] 00 00 00 00 [ 3.352322] sd 0:0:1:0: [sda] [ 3.352324] Add. Sense: Scsi parity error [ 3.352327] sd 0:0:1:0: [sda] CDB: [ 3.352328] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 3.352336] end_request: I/O error, dev sda, sector 0 [ 3.352448] Buffer I/O error on device sda, logical block 0 [ 3.352555] ata1: EH complete [ 3.400372] ldm_validate_partition_table(): Disk read failed. [ 3.400764] sda: unable to read partition table [ 3.400969] sd 0:0:1:0: [sda] Attached SCSI disk
That doesn't look good - can you access it using "fdisk /dev/sda" ? /Per -- Per Jessen, Zürich (17.5°C) -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org