Hello, I cloned my HD, using clonzilla, to a 1 TB drive however once the OS boots up (OpenSuse 11.2) the partitions aren't correct. For example, Yast shows 624 GB for /dev/sda4; /dev/sda │931.51 GB│ │ │WDC-WD1002FBYS-0│ │ │ ├──Volume Management ││/dev/sda1 │298.14 GB│ │ │HPFS/NTFS │NTF│ │ ├──Crypt Files ││/dev/sda2 │172.57 MB│ │ │Linux native │Ext│ │ ├──Device Mapper ││/dev/sda3 │ 9.00 GB│ │ │Linux swap │Swa│ │ ├──NFS ││/dev/sda4 │624.20 GB│ │ │Linux native │XFS│ However, df-h shows, 359 GB, the original disk size prior to cloning; df -h / Filesystem Size Used Avail Use% Mounted on /dev/sda4 359G 356G 3.5G 100% / <snip> Parted shows; GNU Parted 1.9.0 Using /dev/sda Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) print Model: ATA WDC WD1002FBYS-0 (scsi) Disk /dev/sda: 1000GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 320GB 320GB primary ntfs type=07 2 320GB 320GB 181MB primary ext3 boot, type=83 3 320GB 330GB 9665MB primary linux-swap(v1) type=82 4 330GB 1000GB 670GB primary xfs type=83 <snip> Any suggestion how to fix this? I keep running out of disk space. Many thanks in advance, James -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org