Hello list members: I have a Silicon Image (SiI) 3512A PCI SATA raid controller, and two hard disks that contains a SiI mirrored raid set. The raid set was set up in the card's BIOS, and at boot it is detected correctly by the card's BIOS. In openSUSE 11.2 however the raid set in not detected. dmraid gives the following results: linux:~ # dmraid -s no raid disks linux:~ # dmraid -r no raid disks linux:~ # dmraid --version dmraid version: 1.0.0.rc16-3 (2010.01.12) dmraid library version: 1.0.0.rc16-3 (2010.01.12) device-mapper version: 4.15.0 linux:~ # linux:~ # ls -l /dev/mapper total 0 crw-rw---- 1 root root 10, 60 Apr 24 20:17 control linux:~ # I tried openSUSE 11.4 live CD (KDE version) which gave the same result, except for it has newer device mapper, 4.18.0. If I boot knoppix live CD, however, it detects the raid set correctly: root@Microknoppix:~# dmraid -s *** Active Set name : sil_bhaedgcfdjde size : 320168895 stride : 0 type : mirror status : ok subsets: 0 devs : 2 spares : 0 root@Microknoppix:~# dmraid -r /dev/sdb: sil, "sil_bhaedgcfdjde", mirror, ok, 320168895 sectors, data@ 0 /dev/sda: sil, "sil_bhaedgcfdjde", mirror, ok, 320168895 sectors, data@ 0 root@Microknoppix:~# dmraid --version dmraid version: 1.0.0.rc16 (2009.09.16) shared dmraid library version: 1.0.0.rc16 (2009.09.16) device-mapper version: 4.18.0 root@Microknoppix:~# ls -l /dev/mapper total 0 crw------- 1 root root 10, 236 Apr 24 20:05 control lrwxrwxrwx 1 root root 7 Apr 24 20:05 sil_bhaedgcfdjde -> ../dm-0 lrwxrwxrwx 1 root root 7 Apr 24 20:05 sil_bhaedgcfdjde1 -> ../dm-1 lrwxrwxrwx 1 root root 7 Apr 24 20:05 sil_bhaedgcfdjde2 -> ../dm-2 lrwxrwxrwx 1 root root 7 Apr 24 20:05 sil_bhaedgcfdjde3 -> ../dm-3 lrwxrwxrwx 1 root root 7 Apr 24 20:05 sil_bhaedgcfdjde5 -> ../dm-4 lrwxrwxrwx 1 root root 7 Apr 24 20:05 sil_bhaedgcfdjde6 -> ../dm-5 lrwxrwxrwx 1 root root 7 Apr 24 20:05 sil_bhaedgcfdjde7 -> ../dm-6 lrwxrwxrwx 1 root root 7 Apr 24 20:05 sil_bhaedgcfdjde8 -> ../dm-7 lrwxrwxrwx 1 root root 7 Apr 24 20:05 sil_bhaedgcfdjde9 -> ../dm-8 I can mount and use the mirrored partitions. I would like to use this raid set in openSUSE 11.2 too. How could I set it up to work as expected, and what can be the cause for not being it detected? Thanks, Istvan -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org