Mailinglist Archive: opensuse (516 mails)

["Carlos E. R." <carlos.e.r@xxxxxxxxxxxx>]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On 2011-02-10 11:44, Dave Plater wrote:
> On 02/10/2011 03:01 AM, Carlos E. R. wrote:

Switching to os-en, the part relevant for 11.2

> > I never use home repos. I'd try if it were in a normal repo maintained by
> > Novell people. Home repos are private playgrounds, not for use unless told
> > by the maintainer (and I trust him/her)
> It's located in Base:System/cdrtools which unfortunately only has
> factory repos but I linked to it in my home:plater project and it builds
> for 11.2, I'm still on 11.3, just needed to link to smake (Schilly's own
> rendition of make, as if we needed another one)

:-)

> It would be available for all to use if it's author wasn't so pig headed
> about granting permission for re-licensing.

I guess.

By the way, I'm attempting to install your rpm. Shouldn't it conflict
"cdrkit-cdrtools-compat"? I had to manually remove it.



At least he is correct in that his software does produce a sensible error
message:


...
Trying to clear drive status.
Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: -24706
cdrecord: Data does not fit on current disk.


Now I'm burning an image of 11.3, to see how it behaves:



cer@Telcontar:~/Download/Firefox_downloads> cdrecord -eject -v dev=/dev/dvd
/data/storage_b/cer_big/isos_11.3/openSUSE-DVD-Build0577-x86_64.iso
cdrecord: No write mode specified.
cdrecord: Assuming -sao mode.
cdrecord: If your drive does not accept -sao, try -tao.
cdrecord: Future versions of cdrecord may have different drive dependent
defaults.
Cdrecord-ProDVD-ProBD-Clone 3.01a01 (x86_64-unknown-linux-gnu) Copyright
(C) 1995-2010 J�rg Schilling
TOC Type: 1 = CD-ROM
scsidev: '/dev/dvd'
devname: '/dev/dvd'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.9'.
SCSI buffer size: 64512
atapi: 1
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   :
Vendor_info    : 'HL-DT-ST'
Identifikation : 'DVDRAM GH22LS50 '
Revision       : 'TL01'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: DVD+RW
Profile: DVD-RAM
Profile: DVD-R sequential recording
Profile: DVD-R/DL sequential recording
Profile: DVD-R/DL layer jump recording
Profile: DVD-RW sequential recording
Profile: DVD-RW restricted overwrite
Profile: DVD+RW (current)
Profile: DVD+R
Profile: DVD+R/DL
Profile: DVD-ROM
Profile: CD-R
Profile: CD-RW
Profile: CD-ROM
Profile: Removable Disk
Using generic SCSI-3/mmc-3 DVD+RW driver (mmc_dvdplusrw).
Driver flags   : NO-CD DVD MMC-3 SWABAUDIO BURNFREE
Supported modes: PACKET SAO LAYER_JUMP
Drive buf size : 1048576 = 1024 KB
Drive pbuf size: 1966080 = 1920 KB
cdrecord: Warning: DMA resid 0 for 'read buffer', actual data is too short.
cdrecord: Warning: The DMA speed test has been skipped.
FIFO size      : 4194304 = 4096 KB
Track 01: data  4199 MB
Total size:     4199 MB = 2150033 sectors
Current Secsize: 2048
Trying to clear drive status.
Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: 145071
Reducing transfer size from 64512 to 32768 bytes.
Starting to write CD/DVD/BD at speed 4 in real SAO mode for single session.
Last chance to quit, starting real write    0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Starting new track at sector: 0
Track 02:  755 of 4199 MB written (fifo  98%) [buf 100%]   4.0x.
...
Track 02: Total bytes read/written: 4403267584/4403267584 (2150033 sectors).
Writing  time:  813.987s
Average write speed   3.9x.
Min drive buffer fill was 100%
Fixating...
Fixating time:   45.569s
cdrecord: fifo had 134378 puts and 134378 gets.
cdrecord: fifo was 0 times empty and 39024 times full, min fill was 85%.
cer@Telcontar:~/Download/Firefox_downloads>



I wonder why it is using track number two? :-?

Anyway, it is mountable.

Thanks for packaging the tool - and a shame he says what he says of you.


- -- 
Cheers / Saludos,

                Carlos E. R.
                (from 11.2 x86_64 "Emerald" at Telcontar)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.12 (GNU/Linux)
Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org/

iEYEARECAAYFAk1T7KkACgkQtTMYHG2NR9WHFQCeN5MlEHxGgae6VctPneO5b4w3
8yIAn07ruyO1QUHojdSP7xybtd48guGB
=IWpf
-----END PGP SIGNATURE-----
-- 
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx