With SLES10 SP3 x86_64, as soon as I start the second iscsi session, and issue any SCSI command e.g. INQUIRY on the devices, I am very continuosly getting the connection errors I do not see this with SLES10 SP2 x86_64 on the same setup. Dec 7 18:42:05 cdc-r710s1 kernel: connection2:0: detected conn error (1011) Dec 7 18:42:06 cdc-r710s1 iscsid: connection2:0 is operational after recovery (1 attempts) Dec 7 18:42:06 cdc-r710s1 iscsid: Kernel reported iSCSI connection 2:0 error (1011) state (3) Dec 7 18:42:08 cdc-r710s1 kernel: connection2:0: detected conn error (1011) I have tried changing noop_out_interval and noop_out_timeout to 120/120 and 0/0 but did not help. The iscsiadm settings are same on both SP2 and SP3. Is there anything else that can be tried ? # iscsiadm -m session -P 1 Target: iqn.1992-04.com.emc:cx.ckm00091100683.a3 ........ iSCSI Connection State: TRANSPORT WAIT iSCSI Session State: FAILED Internal iscsid Session State: REPOEN # rpm -qa | grep iscsi iscsitarget-0.4.17-3.4.25 open-iscsi-2.0.868-0.6.11 yast2-iscsi-client-2.14.47-0.4.9 yast2-iscsi-server-2.13.26-0.3 -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org