Mailinglist Archive: opensuse (2810 mails)
| < Previous | Next > |
Re: [opensuse] Too much removed. Any help ?.
- From: David Bolt <bcrafhfr@xxxxxxxxxx>
- Date: Thu, 11 Dec 2008 22:42:18 +0000
- Message-id: <ZgrUTi9KdZQJFwuK@xxxxxxxxxxxxxxxxxxx>
On Thu, 11 Dec 2008, Erik Jakobsen wrote:-
In that case, what you need to do is reinstall the missing packages. The
easiest way is to make sure that you have the patterns "YaST System
Administration" and "YaST Installation Packages" installed. Open
YaST -> Software -> Software Management and then make sure those two
patterns are enabled. Also, scroll down the packages listed and make
sure that you haven't marked any as taboo, otherwise they will not be
re-installed.
Looking at the four pictures posted, you have a load of modules missing.
The above should get most/all of them back but, if it doesn't, change
the filter to "search", and make sure you're only "Name" is checked.
Then enter "YaST" in the search box. This should produce a list of all
the YaST modules. Go through the list in the package management window,
read the description for each module, and select those that you want to
include. As a starter, here's the list of (almost all) the YaST modules
I have installed:
yast2-add-on
yast2-apparmor
yast2-backup
yast2-bootloader
yast2-control-center
yast2-control-center-qt
yast2-country
yast2-country-data
yast2-firewall
yast2-hardware-detection
yast2-inetd
yast2-installation
yast2-instserver
yast2-irda
yast2-iscsi-client
yast2-kerberos-client
yast2-ldap
yast2-ldap-client
yast2-libyui
yast2-mail
yast2-metapackage-handler
yast2-mouse
yast2-ncurses
yast2-ncurses-pkg
yast2-network
yast2-nfs-client
yast2-nfs-common
yast2-nis-client
yast2-ntp-client
yast2-online-update
yast2-online-update-frontend
yast2-packager
yast2-pam
yast2-perl-bindings
yast2-phone-services
yast2-pkg-bindings
yast2-printer
yast2-profile-manager
yast2-qt
yast2-qt-pkg
yast2-registration
yast2-repair
yast2-restore
yast2-runlevel
yast2-samba-client
yast2-scanner
yast2-schema
yast2-security
yast2-slp
yast2-sound
yast2-storage
yast2-storage-lib
yast2-sudo
yast2-support
yast2-sysconfig
yast2-theme-openSUSE
yast2-trans-en_GB
yast2-trans-stats
yast2-transfer
yast2-tune
yast2-tv
yast2-update
yast2-users
yast2-vm
yast2-x11
yast2-xml
yast2-ycp-ui-bindings
Regards,
David Bolt
--
Team Acorn: http://www.distributed.net/ OGR-NG @ ~100Mnodes RC5-72 @ ~1Mkeys/s
SUSE 10.1 32 | | openSUSE 10.3 32b | openSUSE 11.0 32b
| openSUSE 10.2 64b | openSUSE 10.3 64b | openSUSE 11.0 64b
RISC OS 3.6 | TOS 4.02 | openSUSE 10.3 PPC | RISC OS 3.11
--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx
Carlos E. R. wrote:
Module "yast=>software". There, menu "extras", on the top. Then,
select "verify system".
Ok now I got it. "System dpendencies verify ok"
In that case, what you need to do is reinstall the missing packages. The
easiest way is to make sure that you have the patterns "YaST System
Administration" and "YaST Installation Packages" installed. Open
YaST -> Software -> Software Management and then make sure those two
patterns are enabled. Also, scroll down the packages listed and make
sure that you haven't marked any as taboo, otherwise they will not be
re-installed.
Looking at the four pictures posted, you have a load of modules missing.
The above should get most/all of them back but, if it doesn't, change
the filter to "search", and make sure you're only "Name" is checked.
Then enter "YaST" in the search box. This should produce a list of all
the YaST modules. Go through the list in the package management window,
read the description for each module, and select those that you want to
include. As a starter, here's the list of (almost all) the YaST modules
I have installed:
yast2-add-on
yast2-apparmor
yast2-backup
yast2-bootloader
yast2-control-center
yast2-control-center-qt
yast2-country
yast2-country-data
yast2-firewall
yast2-hardware-detection
yast2-inetd
yast2-installation
yast2-instserver
yast2-irda
yast2-iscsi-client
yast2-kerberos-client
yast2-ldap
yast2-ldap-client
yast2-libyui
yast2-mail
yast2-metapackage-handler
yast2-mouse
yast2-ncurses
yast2-ncurses-pkg
yast2-network
yast2-nfs-client
yast2-nfs-common
yast2-nis-client
yast2-ntp-client
yast2-online-update
yast2-online-update-frontend
yast2-packager
yast2-pam
yast2-perl-bindings
yast2-phone-services
yast2-pkg-bindings
yast2-printer
yast2-profile-manager
yast2-qt
yast2-qt-pkg
yast2-registration
yast2-repair
yast2-restore
yast2-runlevel
yast2-samba-client
yast2-scanner
yast2-schema
yast2-security
yast2-slp
yast2-sound
yast2-storage
yast2-storage-lib
yast2-sudo
yast2-support
yast2-sysconfig
yast2-theme-openSUSE
yast2-trans-en_GB
yast2-trans-stats
yast2-transfer
yast2-tune
yast2-tv
yast2-update
yast2-users
yast2-vm
yast2-x11
yast2-xml
yast2-ycp-ui-bindings
Regards,
David Bolt
--
Team Acorn: http://www.distributed.net/ OGR-NG @ ~100Mnodes RC5-72 @ ~1Mkeys/s
SUSE 10.1 32 | | openSUSE 10.3 32b | openSUSE 11.0 32b
| openSUSE 10.2 64b | openSUSE 10.3 64b | openSUSE 11.0 64b
RISC OS 3.6 | TOS 4.02 | openSUSE 10.3 PPC | RISC OS 3.11
--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx
| < Previous | Next > |