Mailinglist Archive: opensuse (2810 mails)

[Erik Jakobsen <eja@xxxxxxxxxxx>]

Erik Jakobsen wrote:
> >
> I did not restore the kernel from the DVD
> > You have to edit /boot/grub/menu.lst, find the entry you use, 
> > something like:
> >
> > ###Don't change this comment - YaST2 identifier: Original name: linux###
> > title openSUSE 11.1 - 2.6.27.7-4
> >     root (hd0,7)
> >     kernel /vmlinuz-2.6.27.7-4-pae root=/dev/disk/by-label/160_test 
> > resume=/dev/disk/by-label/320_swap splash=silent showopts vga=0x317
> >     initrd /initrd-2.6.27.7-4-pae
> >
> >
> > replace (mutandis mutandi) /vmlinuz-2.6.27.7-4-pae with /vmlinuz, and 
> > /initrd-2.6.27.7-4-pae with /initrd. Should work.
>
>
> My menu.lst shows this:
>
> # Modified by YaST2. Last modification on Sun Sep 28 10:09:28 CEST 2008
> ###YaST update: former default image flavor: pae###
> default 0
> timeout 8
> gfxmenu (hd0,1)/boot/message
> ##YaST - activate
>
> ###Don't change this comment - YaST2 identifier: Original name: linux###
> title openSUSE 11.0 - 2.6.25.16-0.1 (default)
>    root (hd0,1)
>    kernel /boot/vmlinuz-2.6.25.16-0.1-default 
> root=/dev/disk/by-id/scsi-SATA_WDC_WD800JB-00J_WD-WCAM9M475425-part2 
> resume=/dev/sda1 splash=silent showopts vga=0x31a
>    initrd /boot/initrd-2.6.25.16-0.1-default
>
> ###Don't change this comment - YaST2 identifier: Original name: 
> failsafe###
> title Failsafe -- openSUSE 11.0 - 2.6.25.16-0.1
>    root (hd0,1)
>    kernel /boot/vmlinuz-2.6.25.16-0.1-default 
> root=/dev/disk/by-id/scsi-SATA_WDC_WD800JB-00J_WD-WCAM9M475425-part2 
> showopts ide=nodma apm=off acpi=off noresume nosmp noapic maxcpus=0 
> edd=off x11failsafe vga=0x31a
>    initrd /boot/initrd-2.6.25.16-0.1-default
>
> ###Don't change this comment - YaST2 identifier: Original name: 
> linux-2.6.25.16-0.1-debug###
> title Debug -- openSUSE 11.0 - 2.6.25.16-0.1
>    root (hd0,1)
>    kernel /boot/vmlinuz-2.6.25.16-0.1-debug 
> root=/dev/disk/by-id/scsi-SATA_WDC_WD800JB-00J_WD-WCAM9M475425-part2 
> resume=/dev/sda1 splash=silent showopts vga=0x31a
>    initrd /boot/initrd-2.6.25.16-0.1-debug
>
> ###Don't change this comment - YaST2 identifier: Original name: xen###
> title Xen -- openSUSE 11.0 - 2.6.25.16-0.1
>    root (hd0,1)
>    kernel /boot/xen.gz
>    module /boot/vmlinuz-2.6.25.16-0.1-xen 
> root=/dev/disk/by-id/scsi-SATA_WDC_WD800JB-00J_WD-WCAM9M475425-part2 
> resume=/dev/sda1 splash=silent showopts vga=0x31a
>    module /boot/initrd-2.6.25.16-0.1-xen
>
> ###Don't change this comment - YaST2 identifier: Original name: floppy###
> title Floppy
>    rootnoverify (hd0,1)
>    chainloader (fd0)+1
I got this when I ran uname -a:

Linux dhcppc3 2.6.25.5-1.1-pae #1 SMP 2008-06-07 01:55:22 +0200 i686 
athlon i386 GNU/Linux

And this is not the one in menu.lst

To be sure, that I do it correct, please write me what I have to 
insert/change. Thanks!

--
Med venlig hilsen / Best regards
Erik Jakobsen
eja@xxxxxxxxxxx
Registered Linux user #114875 - http://counter.li.org

--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx