Mailinglist Archive: opensuse (1606 mails)

[Rui Santos <rsantos@xxxxxxxxxxxxx>]

wanakom@xxxxxxxxx wrote:
> Hi all,
>
> My server with Opensuse 11.0 has 3 network adapters, eth3 as external
> interface (public IP), eth0 (172.26.0.1) and eth2 (192.168.1.1) as
> internal.
>
> I am trying to link the two internal nets (172.26.x.x and 192.168.1.x)
> so users from both networks can use the printers in both nets.
>
> My SuSeFirewall2 config is as follow:
> - FW_DEV_EXT="any eth3"
> - FW_DEV_INT="eth0 eth2"
> - FW_ROUTE="yes"
> - FW_MASQUERADE="yes"
> - FW_MASQ_DEV="zone:ext zone:int"
> - FW_MASQ_NETS="172.26.0.0/16,192.168.1.0/24
> 192.168.1.0/24,172.26.0.0/16 192.168.1.0/24 172.26.0.0/16"
> - FW_PROTECT_FROM_INT="no"
>
> From network 172.26.x.x  I can ping up to eth2 but no futher, and the
> same with network 192.168.2.x
What about ssh ? Can you ssh from one net to another ?
> My Google searches have not shown any result. What do I miss in my
> configuration ?
Are you sure it's a firewall configuration ? It could be the
configuration of your print-server system. Many printing servers, by
default, only allow printing from the network it is connected to. Just
check it to make sure.
If you are sure it is a firewall configuration, could you provide the
firewall log right after a printing attempt ? Also state witch machine
is printing to witch machine.
> Thanks,

-- 
Rui Santos
http://www.ruisantos.com/

Veni, vidi, Linux!

-- 
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx