* David C. Rankin
I thought I saw you were able to get output?
<snip>
01:05 wahoo:../eol.svn/trunk # upsc myups@localhost battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 50 battery.date: 2001/09/25 battery.mfr.date: 2008/02/19 battery.runtime: 510 battery.runtime.low: 120
<snip>
I can't even do that:
21:36 wahoo:~ # upsc myups@localhost battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 50 battery.date: 2001/09/25 battery.mfr.date: 2008/02/19 battery.runtime: 534 battery.runtime.low: 120 battery.type: PbAc battery.voltage: 13.7 battery.voltage.nominal: 12.0 driver.name: newhidups driver.parameter.port: auto driver.version: 2.0.4 driver.version.data: APC/CyberPower HID 0.9 driver.version.internal: 0.28 input.transfer.high: 139 input.transfer.low: 92 input.voltage: 112.0 input.voltage.nominal: 120 ups.beeper.status: enabled ups.delay.shutdown: -1 ups.firmware: 841.I2 .D ups.firmware.aux: I2 ups.load: 46 ups.mfr: American Power Conversion ups.mfr.date: 2008/02/19 ups.model: Back-UPS ES 750 ups.serial: 3B0808X06916 ups.status: OL ups.test.result: No test initiated
[18:05 nirvana/home/david] # upsc nirvana_UPS@localhost Error: Connection failure: Connection refused
Googling, there are prior opensuse posts about opensuse having messed up the init script and other nut scripts. Based on my experience, that may never have been fixed. I will continue to look.
21:41 wahoo:~ # upscmd -l myups@localhost Instant commands supported on UPS [myups@localhost]: test.panel.start - Start testing the UPS panel test.panel.stop - Stop a UPS panel test load.off - Turn off the load immediately shutdown.return - Turn off the load and return when power is back shutdown.stop - Stop a shutdown in progress beeper.on - Enable the UPS beeper beeper.off - Disable the UPS beeper but I cannot send a command and I get the following: 21:42 wahoo:~ # upscmd myups@localhost -u root beeper.on Username (root): Password: Error: old command names are not supported The web (cgi) interface shows stats and accepts commands, but will not act on the commands. I cannot start a test. -- Patrick Shanahan Plainfield, Indiana, USA HOG # US1244711 http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 Registered Linux User #207535 @ http://counter.li.org -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org