Mailinglist Archive: opensuse (3031 mails)
| < Previous | Next > |
Re: [opensuse] Re: USB modem, wvdial does not redial
- From: Constant Brouerius van Nidek <constant@xxxxxxxxxxx>
- Date: Tue, 5 Feb 2008 23:59:15 +0700
- Message-id: <200802052359.37407.constant@xxxxxxxxxxx>
On Monday 04 February 2008 23:53:25 Dave Plater wrote:
For your info, I am using Kinternet.
My info is as follows:
# hwinfo --usb
03: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_07_2_if0
Unique ID: k4bc.6W47IPwMdd5
SysFS ID: /devices/pci0000:00/0000:00:07.2/usb1/1-0:1.0
SysFS BusID: 1-0:1.0
Hardware Class: hub
Model: "Linux 2.6.22.2-ccj52-default uhci_hcd UHCI Host Controller"
Hotplug: USB
Vendor: "Linux 2.6.22.2-ccj52-default uhci_hcd"
Device: "UHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:07.2"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v0000p0000d0206dc09dsc00dp00ic09isc00ip00"
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: "modprobe usbcore"
Config Status: cfg=no, avail=yes, need=no, active=unknown
04: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_3eb_3301_noserial_if0
Unique ID: ADDn.hKbQSFhpkw6
Parent ID: k4bc.6W47IPwMdd5
SysFS ID: /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1:1.0
SysFS BusID: 1-1:1.0
Hardware Class: hub
Model: "Atmel 4-port Hub"
Hotplug: USB
Vendor: usb 0x03eb "Atmel Corp."
Device: usb 0x3301 "4-port Hub"
Revision: "3.00"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v03EBp3301d0300dc09dsc00dp00ic09isc00ip00"
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: "modprobe usbcore"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #3 (Hub)
05: USB 00.0: 10503 USB Mouse
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_15ca_c3_noserial_if0
Unique ID: dwDZ.UD+3qz0WkC0
Parent ID: ADDn.hKbQSFhpkw6
SysFS ID: /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1.3/1-1.3:1.0
SysFS BusID: 1-1.3:1.0
Hardware Class: mouse
Model: "USB Optical Mouse"
Hotplug: USB
Vendor: usb 0x15ca
Device: usb 0x00c3 "USB Optical Mouse"
Revision: "5.12"
Compatible to: int 0x0210 0x0013
Driver: "usbhid"
Driver Modules: "usbhid"
Device File: /dev/input/mice (/dev/input/mouse1)
Device
Files: /dev/input/mice, /dev/input/mouse1, /dev/input/event2,
/dev/input/by-id/usb-15ca_USB_Optical_Mouse-event-mouse,
/dev/input/by-path/pci-0000:00:07.2-usb-0:1.3:1.0-event-mouse,
/dev/input/by-id/usb-15ca_USB_Optical_Mouse-mouse,
/dev/input/by-path/pci-0000:00:07.2-usb-0:1.3:1.0-mouse
Device Number: char 13:63 (char 13:33)
Speed: 1.5 Mbps
Module Alias: "usb:v15CAp00C3d0512dc00dsc00dp00ic03isc01ip02"
Driver Info #0:
Buttons: 3
Wheels: 1
XFree86 Protocol: explorerps/2
GPM Protocol: exps2
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #4 (Hub)
06: USB 00.0: 10200 Modem
[Created at usb.122]
UDI:
/org/freedesktop/Hal/devices/usb_device_1b7d_70a_noserial_if0_serial_unknown_0
Unique ID: lfzD.gQKXOFrp8H8
Parent ID: ADDn.hKbQSFhpkw6
SysFS ID: /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1.1/1-1.1:1.0
SysFS BusID: 1-1.1:1.0
Hardware Class: modem
Model: "Qualcomm CDMA Technologies MSM"
Hotplug: USB
Vendor: usb 0x1b7d "Qualcomm, Incorporated"
Device: usb 0x070a "Qualcomm CDMA Technologies MSM"
Driver: "cdc_acm"
Driver Modules: "cdc_acm"
Device File: /dev/ttyACM0
Speed: 12 Mbps
Module Alias: "usb:v1B7Dp070Ad0000dc02dsc00dp00ic02isc02ip01"
Driver Info #0:
Driver Status: cdc_acm is active
Driver Activation Cmd: "modprobe cdc_acm"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #4 (Hub)
07: USB 00.1: 0000 Unclassified device
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_1b7d_70a_noserial_if1
Unique ID: DrDI.VRkArQ0viUB
Parent ID: ADDn.hKbQSFhpkw6
SysFS ID: /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1.1/1-1.1:1.1
SysFS BusID: 1-1.1:1.1
Hardware Class: unknown
Model: "Qualcomm CDMA Technologies MSM"
Hotplug: USB
Vendor: usb 0x1b7d "Qualcomm, Incorporated"
Device: usb 0x070a "Qualcomm CDMA Technologies MSM"
Driver: "cdc_acm"
Driver Modules: "cdc_acm"
Speed: 12 Mbps
Module Alias: "usb:v1B7Dp070Ad0000dc02dsc00dp00ic0Aisc00ip00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #4 (Hub)
--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx
Constant Brouerius van Nidek wrote:
On Monday 04 February 2008, Dave Howorth wrote:
G T Smith wrote:
Dave Howorth wrote:
G T Smith wrote:
CDMA is a Mobile (Cell phone) communication standard (not a propriety
wi-fi standard). This is a connect to the network via your mobile
phone type thing. CDMA is not commonly used outside US/South East
Asia... Rest of the world tends to be GSM/3G.
I'm curious which SE Asian countries use CDMA? All the ones I'm aware
of use GSM.
Cheers, Dave
Hate using wikipedia but the link below gives idea...
http://en.wikipedia.org/wiki/IS-95...
I was aware of South Korea and US, but some of the others listed are a
surprise to me...
But none of the countries listed there are in SE Asia! :)
Constant Brouerius van Nidek wrote:
Dave, I have a CDMA USB modem working on my Thinkpad with openSUSE
10.2 In Indonesia there are some providers with CDMA but most of
them offer GSM.
Aha! Found one, thanks Constant. I knew there was GSM in Indonesia but
didn't realize there were alternatives.
And the best part, on the box of this CDMA modem it states, O/S Supported
: Windows 2000, XP, Vista & Linux Suse 10.0
Manufactured by Sungil Telecom
Can you try, as root, hwinfo --usb and post the info.
Dave
For your info, I am using Kinternet.
My info is as follows:
# hwinfo --usb
03: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_07_2_if0
Unique ID: k4bc.6W47IPwMdd5
SysFS ID: /devices/pci0000:00/0000:00:07.2/usb1/1-0:1.0
SysFS BusID: 1-0:1.0
Hardware Class: hub
Model: "Linux 2.6.22.2-ccj52-default uhci_hcd UHCI Host Controller"
Hotplug: USB
Vendor: "Linux 2.6.22.2-ccj52-default uhci_hcd"
Device: "UHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:07.2"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v0000p0000d0206dc09dsc00dp00ic09isc00ip00"
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: "modprobe usbcore"
Config Status: cfg=no, avail=yes, need=no, active=unknown
04: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_3eb_3301_noserial_if0
Unique ID: ADDn.hKbQSFhpkw6
Parent ID: k4bc.6W47IPwMdd5
SysFS ID: /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1:1.0
SysFS BusID: 1-1:1.0
Hardware Class: hub
Model: "Atmel 4-port Hub"
Hotplug: USB
Vendor: usb 0x03eb "Atmel Corp."
Device: usb 0x3301 "4-port Hub"
Revision: "3.00"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v03EBp3301d0300dc09dsc00dp00ic09isc00ip00"
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: "modprobe usbcore"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #3 (Hub)
05: USB 00.0: 10503 USB Mouse
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_15ca_c3_noserial_if0
Unique ID: dwDZ.UD+3qz0WkC0
Parent ID: ADDn.hKbQSFhpkw6
SysFS ID: /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1.3/1-1.3:1.0
SysFS BusID: 1-1.3:1.0
Hardware Class: mouse
Model: "USB Optical Mouse"
Hotplug: USB
Vendor: usb 0x15ca
Device: usb 0x00c3 "USB Optical Mouse"
Revision: "5.12"
Compatible to: int 0x0210 0x0013
Driver: "usbhid"
Driver Modules: "usbhid"
Device File: /dev/input/mice (/dev/input/mouse1)
Device
Files: /dev/input/mice, /dev/input/mouse1, /dev/input/event2,
/dev/input/by-id/usb-15ca_USB_Optical_Mouse-event-mouse,
/dev/input/by-path/pci-0000:00:07.2-usb-0:1.3:1.0-event-mouse,
/dev/input/by-id/usb-15ca_USB_Optical_Mouse-mouse,
/dev/input/by-path/pci-0000:00:07.2-usb-0:1.3:1.0-mouse
Device Number: char 13:63 (char 13:33)
Speed: 1.5 Mbps
Module Alias: "usb:v15CAp00C3d0512dc00dsc00dp00ic03isc01ip02"
Driver Info #0:
Buttons: 3
Wheels: 1
XFree86 Protocol: explorerps/2
GPM Protocol: exps2
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #4 (Hub)
06: USB 00.0: 10200 Modem
[Created at usb.122]
UDI:
/org/freedesktop/Hal/devices/usb_device_1b7d_70a_noserial_if0_serial_unknown_0
Unique ID: lfzD.gQKXOFrp8H8
Parent ID: ADDn.hKbQSFhpkw6
SysFS ID: /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1.1/1-1.1:1.0
SysFS BusID: 1-1.1:1.0
Hardware Class: modem
Model: "Qualcomm CDMA Technologies MSM"
Hotplug: USB
Vendor: usb 0x1b7d "Qualcomm, Incorporated"
Device: usb 0x070a "Qualcomm CDMA Technologies MSM"
Driver: "cdc_acm"
Driver Modules: "cdc_acm"
Device File: /dev/ttyACM0
Speed: 12 Mbps
Module Alias: "usb:v1B7Dp070Ad0000dc02dsc00dp00ic02isc02ip01"
Driver Info #0:
Driver Status: cdc_acm is active
Driver Activation Cmd: "modprobe cdc_acm"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #4 (Hub)
07: USB 00.1: 0000 Unclassified device
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_1b7d_70a_noserial_if1
Unique ID: DrDI.VRkArQ0viUB
Parent ID: ADDn.hKbQSFhpkw6
SysFS ID: /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1.1/1-1.1:1.1
SysFS BusID: 1-1.1:1.1
Hardware Class: unknown
Model: "Qualcomm CDMA Technologies MSM"
Hotplug: USB
Vendor: usb 0x1b7d "Qualcomm, Incorporated"
Device: usb 0x070a "Qualcomm CDMA Technologies MSM"
Driver: "cdc_acm"
Driver Modules: "cdc_acm"
Speed: 12 Mbps
Module Alias: "usb:v1B7Dp070Ad0000dc02dsc00dp00ic0Aisc00ip00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #4 (Hub)
--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx
| < Previous | Next > |