-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 The Monday 2007-12-31 at 10:48 +0100, Cristea Bogdan wrote:
I am not able to figure out where the modem is mounted. Here is the information I get with hwinfo:
Me neither... But it is a softmodem, not a plain modem. Those are "special", they need drivers. I've never used one of those (I hate them), so I can't be of much help if that's the case.
53: USB 00.0: 0000 Unclassified device [Created at usb.122] UDI: /org/freedesktop/Hal/devices/usb_device_483_7554_noserial_if0 Unique ID: ADDn._Hv2S+I4AYC Parent ID: k4bc.c5R855WHmXB SysFS ID: /devices/pci0000:00/0000:00:0b.0/usb1/1-1/1-1:1.0 SysFS BusID: 1-1:1.0 Hardware Class: unknown Model: "SGS Thomson Microelectronics 56k SoftModem" Hotplug: USB Vendor: usb 0x0483 "SGS Thomson Microelectronics" Device: usb 0x7554 "56k SoftModem" Revision: "2.10" Speed: 12 Mbps Module Alias: "usb:v0483p7554d0210dc02dsc00dp00ic02isc80ipFF" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #57 (Hub)
...
Does it means that the modem is not mounted?
Modems are never "mounted". Compare the hwinfo above with mine for a real serial port modem: 29: Serial 00.0: 10200 Modem [Created at modem.447] Unique ID: i7s0.ZhdTkiP6ZR9 Parent ID: v9l_.3fyvFV+mbWD Hardware Class: modem Model: "U.S. Robotics 56K FAX EXT" Vendor: USR "U.S. Robotics, Inc." Device: eisa 0x006f "U.S. Robotics 56K FAX EXT" Compatible to: PNP 0xc107 Device File: /dev/ttyS1 <========== Speed: 115.2 kbps Init1: ATZ Init2: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 Config Status: cfg=yes, avail=yes, need=no, active=unknown Attached to: #24 (Serial controller) The device file is listed there. I expected to see a similar entry on your's. One last thing to try: dissconnect it, connect, and do: ls -ltr /dev This will list the last nodes created, and if there is a new one for your modem, you will see it. But being a softmodem, you will require more things to do, loading special drivers or something. I hope somebody else can tell you more. Search the wiki. - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.4-svn0 (GNU/Linux) iD8DBQFHeNHAtTMYHG2NR9URAjtHAJ9nUzyzOEdcBq2c1jaaLXnQAiLnQgCfVUHx 4wKP3/hXInR9d0/Tw/rde8Q= =XkTz -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org