0Hi.. I have a HP C5280 All In One printer. It's connected to a NAS server. I want to have my opensuse computer to be able to print to it via the LAN I have. But I'm in doubt how I shall use to set it up. I have look at the HPLIP, and the printer is linuxcompatible. I got it set up to be used via the LAN from 2 windows xp computers. The NAS server tells this to set up printers in the network The Path 2 was the one that I used for setting up the printer in Windows. What Path would be equal to set up in opensuse 10.3 ? *Type 1. As Network Port* /Path 1. Through My Network Places/ 1. Open *View Workgroup Computers* in *My Network Places* and double click on the Disk Station. 2. Double click on *usbprinter*; the system will prompt you to install a correct driver. Please insert a printer setup CD, and then click Yes. 3. Select the manufacturer and model of the printer. Then click OK. 4. The system will start to set up the USB printer. Please wait until the setup is completed. Then you may start using the printer. /Path 2. Through Settings/ 1. Click Start button on the desktop. Select *Settings/Printers and Faxes*. 2. Double click on Add Printer. Click Next to continue. 3. Select *Network Printer*, and click Next to continue. 4. Select *Connect to this printer* and input the printer location (e.g. \printer-ds\usbprinter). Click Next to continue. 5. If it's needed, please select a proper driver and proceed. *Type 2. As Local Port* 1. Click Start button on the desktop. Select *Settings/Printers and Faxes*. 2. Double click on Add Printer. Click Next to continue. 3. Select *Local Printer attached to this computer*. Click Next to continue. 4. Select *Create a new port*. Choose *Local Port* from the pull down menu, and click Next to continue. 5. Input the printer location, and click OK. 6. Please select a proper driver and proceed. *Type 3. LPR Port (Recommended)* 1. Click Start button on the desktop. Select *Settings/Printers and Faxes*. 2. Double click on Add Printer. Click Next to continue. 3. Select *Local Printer attached to this computer*. Click Next to continue. 4. Select *Create a new port*. Choose *Standard TCP/IP Port* from the pull down menu, and click Next to continue. 5. Input the IP address of the Disk Station. Click Next to continue. 6. Select *Device Type:* Custome -> Settings…. Click Next to continue. 7. Select *LPR* for protocol; Enter *usbprinter* for Queue Name, and check the *LPR Byte Counting Enabled* checkbox. Click OK to continue. 8. Select printer driver and proceed. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org