My wireless card seems to be detected fine when I look at Hardware Information in Yast. But I don't have it configured properly under Network Card. I basically do not know which information to put where. Here's some basic information that comes up (everything appears good to me about the card itself from Yast perspective): BCM4318 [AirForce One 54g] 802.11 Wireless Lan Controller Device name: eth0 Hwaddr: 00:11:50:ed:43:b8 Wireless Lan: YES driver bcm43xx Drivers: active: YES modprobe: YES modules modprobe bcm43xx I am trying to connect to a Wireless network called "Harland Network." I know I need to put the similar information somewhere under the Network Card configuation (in Yast), but not sure where. From a Windows laptop, I can connect just fine. Here is the data from that laptop: Address Type: DHCP IP: 192.168.1.104 Subnet Mask: 255.255.255.0 Default Gateway: 192.168.1.1 DHCP Server 192.168.1.1 DNS Server: 192.168.1.1 -- Cheers, wmeler -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org