Mailinglist Archive: opensuse (1632 mails)

[Bob S <911@xxxxxxxxxxx>]

Hello SuSE people,

Been trying to get my sensors.conf file to report accurately on my system. 
got most of it squared away except for two alarm conditions. In the second 
column of the 3.3V line it shows +0.45V. The -12V line shows +0.80V. Why is 
that? Are they supposed to be the actual voltages?  That is not what the bios 
reports. Anyone straighten me out here?

Here is the output of sensors.

EasyStreet:/ # sensors
w83627thf-isa-0290
Adapter: ISA adapter
VCore:     +1.54 V  (min =  +0.70 V, max =  +1.87 V)
+12V:     +12.28 V  (min = +10.82 V, max = +13.19 V)
+3.3V:     +0.45 V  (min =  +3.14 V, max =  +3.47 V)       ALARM
+5V:       +5.09 V  (min =  +4.75 V, max =  +5.25 V)
-12V:      +0.80 V  (min = -13.18 V, max = -10.80 V)       ALARM
V5SB:      +5.13 V  (min =  +4.76 V, max =  +5.24 V)
VBat:      +3.62 V  (min =  +2.40 V, max =  +4.08 V)
Sys Fan:  3199 RPM  (min = 2800 RPM, div = 2)
CPU Fan:  5672 RPM  (min = 5487 RPM, div = 2)
M/B Temp:    +46°C  (high =   +70°C, hyst =    +2°C)   sensor = thermistor
CPU Temp:  +33.0°C  (high =   +80°C, hyst =   +75°C)   sensor = diode
temp3:     -48.0°C  (high =   +80°C, hyst =   +75°C)   sensor = thermistor
alarms:
beep_enable:
          Sound alarm enabled

EasyStreet:/ #  

Bob S.                                                                  
--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx