Per Qvindesland wrote:
Thanks everybody for responding,
the motherboard if a Gigabyte 965P-DS3 with a Intel Core 2 E6400 processor, the motherboard and the cpu is a good match, there is no beeps or indications when it starts up, but perhaps that is a good enough indication for someone that really knows this stuff, I am a server engineer, I.E i walk around and configure servers everyday, not build machines :)
Not enough information for a good guess. Try to follow the usual trouble-shooting guide: - describe exactly to which point the machine is starting. does the bios announce itself or does it break down without any messages visible on the monitor? - reduce the machine to the bare minimum first: - power supply - mainboard - cpu - cpu heat sink - ram modules (one if possible) - graphic card (if no onboard vga is available) no hdd or anything else, then carefully check again, that the cpu is and ram and graphic card are inserted correctly. If you can now access the mainboard bios, you are a big step ahead. If not, you are in deep trouble, because you probably have broken hardware. In that case you might try to exchange the above mentioned parts one at a time. -- Sandy List replies only please! Please address PMs to: news-reply2 (@) japantest (.) homelinux (.) com -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org