Hi: I'm running opensuse 10.2 on AMD Athlon 64 X2 Dual Core Processor 3800+ using kernel Linux 2.6.20-rc5-git1-20070124145831-default x86_64. KDE 3.5.5 "release 45.2". Right after boot, "My Computer" desktop application shows what I think is the correct CPU speed: 2,000.00 MHz. "My Computer" seems to refresh itself. If I leave the window up, over time I see the speed change to 1,800.00 MHz, back to 2,000.00 MHz. Then finally, it changes permanently to 1,000.00 MHz. cat /proc/cpuinfo shows 2 CPUs, processor 0 and processor 1, and each CPU MHz 1000.000. So together that should be 2000.00 MHz. Output from cat /proc/cpuinfo follows: richard@linux:~> cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 75 model name : AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping : 2 cpu MHz : 1000.000 cache size : 512 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm cr8_legacy bogomips : 2005.94 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp tm stc processor : 1 vendor_id : AuthenticAMD cpu family : 15 model : 75 model name : AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping : 2 cpu MHz : 1000.000 cache size : 512 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm cr8_legacy bogomips : 2005.94 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp tm stc Is this a KDE Konqueror problem or something else? Regards, Richard -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org