Martin Mielke wrote:
I have superkaramba installed and already use some plugins (the almost omnipresent LiquidWeather and some others). None of the plugins for monitoring will display the info I need (CPU temp, HDD rpm's, etc) even after executing sensors-detect as root and getting some "Succeed!" messages for some sensors...
Any ideas on this?
Maybe your motherboard/bios does not deliver the relevant data? I frequently experience this with cheapo boards where the manafacturers restricted the bios in this respect. Did you follow exactly the advice that sensors-detect gave you? This is especially important in regard to execute the given "modprobe xxx" commands before running "sensors", otherwise it will not work. What is the output, if you run "sensors" from the commandline? ex. on my system this reads like this: ###start of sensors output### w83627thf-isa-0290 Adapter: ISA adapter VCore: +1.60 V (min = +0.00 V, max = +3.84 V) +12V: +12.28 V (min = +7.78 V, max = +0.00 V) ALARM +3.3V: +3.36 V (min = +0.42 V, max = +0.74 V) ALARM +5V: +5.04 V (min = +3.65 V, max = +4.56 V) ALARM -12V: +6.06 V (min = +0.14 V, max = -12.20 V) ALARM V5SB: +5.08 V (min = +0.97 V, max = +1.02 V) ALARM VBat: +0.16 V (min = +2.56 V, max = +1.17 V) ALARM fan1: 0 RPM (min = -1 RPM, div = 128) ALARM CPU Fan: 2872 RPM (min = -1 RPM, div = 2) ALARM fan3: 0 RPM (min = 292 RPM, div = 128) ALARM M/B Temp: +32°C (high = +65°C, hyst = +0°C) sensor = thermistor CPU Temp: +25.5°C (high = +80°C, hyst = +75°C) sensor = thermistor temp3: -48.0°C (high = +80°C, hyst = +75°C) sensor = thermistor vid: +1.525 V (VRM Version 9.0) alarms: beep_enable: ### end of sensors output ### only after you get some relevant output from "sensors" on the commandline I would recommend you to look into graphical frontends to read the data in a more friendly way. regards Eberhard -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org