Mailinglist Archive: opensuse (4498 mails)

< Previous Next >
ide dma problem
  • From: Istvan Gabor <suseuser04@xxxxxxxxxxx>
  • Date: Thu, 2 Nov 2006 18:44:44 +0000 (UTC)
  • Message-id: <freemail.20061002194428.28261@xxxxxxxxxxxxxxxx>
Hello all:

I have suse 10.1.
The system has a cd-rw and a dvd-rw drive.
After booting the system Yast dma status check reports that
for both drive the dma is on. After a certain time checking
again Yast reports that dma is off for both drives.
If I want to turn dma in Yast it gives an error message:

"An error occured while activating the changes. Cannot set
required mode '%1' for device %2."


At the same time according to hdparm dma is on:

# hdparm -i /dev/hdc

/dev/hdc:

Model=PIONEER DVD-RW DVR-108, FwRev=1.20, SerialNo=
Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs
nonMagnetic }
RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0
BuffType=13395, BuffSize=64kB, MaxMultSect=0
(maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0
IORDY=on/off, tPIO={min:240,w/IORDY:120},
tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 *udma4
AdvancedPM=no
Drive conforms to: Unspecified: ATA/ATAPI-2 ATA/ATAPI-3
ATA/ATAPI-4 ATA/ATAPI-5

* signifies the current active mode

# hdparm -i /dev/hdd

/dev/hdd:

Model=ATAPI CD-RW 52XMax, FwRev=180D, SerialNo=
Config={ Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic
}
RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0
BuffType=unknown, BuffSize=1024kB, MaxMultSect=0
(maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0
IORDY=on/off, tPIO={min:383,w/IORDY:120},
tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 *udma2
AdvancedPM=no

* signifies the current active mode

NeroLINUX also claimed that dma was off, and burning a
regular dvd took 40 min when the speed was set to 6x so I
concluded that dma was off. (Is that correct?)

Questions:
1. What can cause that dma is turned off?
2. How can I check dma staus on the command line w/o
starting yast?
3. How could I turn dma on?

TIA,
IG


______________________________________________________________________
KGFB-2007 az Első Online Alkusztól! Kösse nálunk újra kötelező biztosítását!
Az összes biztosító egy helyen, Online kedvezmények, egyszerű ügymenet.
http://www.netrisk.hu



< Previous Next >