Hello all, I have a PixelView PlayTVPro Ultra (chipset CX23882) instaled on my PC (OpenSUSE 10.0 kernel 2.6.13-15). I can watch TV perfectly using TVTime, but I can't listen radio (FM) using Kradio (version 1.0beta3b). What is wrong? Is Kradio the right application to listen radio in this case? This is my /etc/modprobe.d/tv: alias char-major-81 videodev options i2c-algo-bit bit_test=1 options cx88xx card=27 core_debug=1 i2c_scan=1 tuner=38 alias char-major-81-0 cx8800 alias char-major-81-1 off alias char-major-81-2 off alias char-major-81-3 off Below, the dmesg output: Linux video capture interface: v1.00 ivtv_tveeprom: module not supported by Novell, setting U taint flag. cx2388x v4l2 driver version 0.0.5 loaded ... cx88[0]: subsystem: 0000:0000, board: PixelView PlayTV Ultra Pro (Stereo) [card=27,insmod option] TV tuner 38 at 0x1fe, Radio tuner -1 at 0x1fe cx88[0]: cx88_reset ... i2c-algo-bit.o: (0) scl=1, sda=1 i2c-algo-bit.o: (1) scl=1, sda=0 i2c-algo-bit.o: (2) scl=1, sda=1 i2c-algo-bit.o: (3) scl=0, sda=1 i2c-algo-bit.o: (4) scl=1, sda=1 i2c-algo-bit.o: cx88[0] passed test. cx88[0]: i2c scan: found device @ 0xc2 [tuner (analog/dvb)] cx88[0]: i2c scan: found device @ 0xc6 [???] tveeprom(cx88xx internal): Huh, no eeprom present (err=-121)? cx88[0]: registered IR remote control cx88[0]/0: found at 0000:01:08.0, rev: 5, irq: 5, latency: 64, mmio: 0xeb000000 : chip found @ 0xc2 (cx88[0]) tuner 1-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) : chip found @ 0xc6 (cx88[0]) cx88[0]/0: registered device video0 [v4l2] cx88[0]/0: registered device vbi0 cx88[0]/0: registered device radio0 cx88[0]: set_tvnorm: "NTSC-M" fsc8=28636360 adc=28636363 vdec=28636360 db/dr=28636360/28636360 cx88[0]: set_pll: MO_PLL_REG 0x00fffffe [old=0x00f15f18,freq=28636360] cx88[0]: pll locked [pre=2,ofreq=28636360] cx88[0]: set_tvnorm: MO_INPUT_FORMAT 0x00000001 [old=0x00000007] cx88[0]: set_tvnorm: MO_OUTPUT_FORMAT 0x181f0008 [old=0x181f0000] cx88[0]: set_tvnorm: MO_SCONV_REG 0x00020000 [old=0x00021f07] cx88[0]: set_tvnorm: MO_SUB_STEP 0x00400000 [old=0x0043e0f8] cx88[0]: set_tvnorm: MO_SUB_STEP_DR 0x00400000 [old=0x00538e38] cx88[0]: set_tvnorm: MO_AGC_BURST 0x00007270 [old=0x00006d63,bdelay=114,agcdelay=112] cx88[0]: set_tvnorm: MO_HTOTAL 0x0000138e [old=0x0000135a,htotal=910] cx88[0]: set_scale: 320x240 [TB,NTSC-M] cx88[0]: set_scale: hdelay 0x0038 cx88[0]: set_scale: hscale 0x15b3 cx88[0]: set_scale: hactive 0x0140 cx88[0]: set_scale: vdelay 0x0018 cx88[0]: set_scale: vscale 0x1e00 cx88[0]: set_scale: vactive 0x01e0 cx88[0]: set_scale: filter 0x80009 tuner 1-0063: tuner type not set Thanks a lot. --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org