Mailinglist Archive: opensuse (4498 mails)
| < Previous | Next > |
Re: [opensuse] TV Cards
- From: John Meyer <john.l.meyer@xxxxxxxxx>
- Date: Sun, 12 Nov 2006 10:07:02 -0700
- Message-id: <455754B6.3090303@xxxxxxxxx>
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
a whole bunch of this:
Playing /dev/video0.
Cannot seek backward in linear streams!
Seek failed
Cannot seek backward in linear streams!
steve reilly wrote:
> On Sunday 12 November 2006 09:03, John Meyer wrote:
>
> john,
>
> im not 100% sure on the bttv driver as i use ivtv, but what happens when you
> issue this command........ open 2 terminals
>
> in the first
>
> mplayer /dev/video0
>
>
> in the second
>
> ivtv-tune -c35
>
>
>
> the 35 being whatever channel you want to view
>
>
>
>> while we're at it, here's what I get from dmesg | grep bttv
>
>> linux-ya18:/home/jmeyer # dmesg | grep bttv
>> bttv: driver version 0.9.16 loaded
>> bttv: using 8 buffers with 2080k (520 pages) each for capture
>> bttv: Bt8xx card found (0).
>> bttv0: Bt878 (rev 17) at 0000:03:08.0, irq: 50, latency: 32, mmio:
>> 0xfdcff000
>> bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
>> bttv0: using: Hauppauge (bt878) [card=10,autodetected]
>> bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
>> bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
>> bttv0: Hauppauge eeprom indicates model#44981
>> bttv0: using tuner=4
>> bttv0: i2c: checking for MSP34xx @ 0x80... not found
>> bttv0: i2c: checking for TDA9875 @ 0xb0... not found
>> bttv0: i2c: checking for TDA7432 @ 0x8a... <6>usb usb2: configuration #1
>> chosen from 1 choice
>> bttv0: i2c: checking for TDA9887 @ 0x86... not found
>> bttv0: registered device video0
>> bttv0: registered device vbi0
>> bttv0: PLL: 28636363 => 35468950 .<6>scsi4 : SCSI emulation for USB Mass
>> Storage devices
>
>
- ---------------------------------------------------------------------
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2 (GNU/Linux)
Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org
iD8DBQFFV1S1bHd4gglFmoARAgzOAJ0ZHeMf2D3RDmfyH+31WU7vRFMaLgCeMX//
/zOQU8Li2l63KvmHNjbfiMI=
=ODwn
-----END PGP SIGNATURE-----
---------------------------------------------------------------------
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx
Hash: SHA1
a whole bunch of this:
Playing /dev/video0.
Cannot seek backward in linear streams!
Seek failed
Cannot seek backward in linear streams!
steve reilly wrote:
> On Sunday 12 November 2006 09:03, John Meyer wrote:
>
> john,
>
> im not 100% sure on the bttv driver as i use ivtv, but what happens when you
> issue this command........ open 2 terminals
>
> in the first
>
> mplayer /dev/video0
>
>
> in the second
>
> ivtv-tune -c35
>
>
>
> the 35 being whatever channel you want to view
>
>
>
>> while we're at it, here's what I get from dmesg | grep bttv
>
>> linux-ya18:/home/jmeyer # dmesg | grep bttv
>> bttv: driver version 0.9.16 loaded
>> bttv: using 8 buffers with 2080k (520 pages) each for capture
>> bttv: Bt8xx card found (0).
>> bttv0: Bt878 (rev 17) at 0000:03:08.0, irq: 50, latency: 32, mmio:
>> 0xfdcff000
>> bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
>> bttv0: using: Hauppauge (bt878) [card=10,autodetected]
>> bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
>> bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
>> bttv0: Hauppauge eeprom indicates model#44981
>> bttv0: using tuner=4
>> bttv0: i2c: checking for MSP34xx @ 0x80... not found
>> bttv0: i2c: checking for TDA9875 @ 0xb0... not found
>> bttv0: i2c: checking for TDA7432 @ 0x8a... <6>usb usb2: configuration #1
>> chosen from 1 choice
>> bttv0: i2c: checking for TDA9887 @ 0x86... not found
>> bttv0: registered device video0
>> bttv0: registered device vbi0
>> bttv0: PLL: 28636363 => 35468950 .<6>scsi4 : SCSI emulation for USB Mass
>> Storage devices
>
>
- ---------------------------------------------------------------------
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2 (GNU/Linux)
Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org
iD8DBQFFV1S1bHd4gglFmoARAgzOAJ0ZHeMf2D3RDmfyH+31WU7vRFMaLgCeMX//
/zOQU8Li2l63KvmHNjbfiMI=
=ODwn
-----END PGP SIGNATURE-----
---------------------------------------------------------------------
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx
| < Previous | Next > |