Hello. The good-old IDE-to-USB box I had works fine on Windows XP, but I cannot make it work in SuSE 10.1. The device is just tested on WinXP one minute ago, both read/write have no problem. After plugged, dmesg shows: usb 2-1: new full speed USB device using uhci_hcd and address 10 usb 2-1: new device found, idVendor=04ce, idProduct=0002 usb 2-1: new device strings: Mfr=1, Product=1, SerialNumber=0 usb 2-1: Product: ScanLogic USBIDE usb 2-1: Manufacturer: ScanLogic USBIDE usb 2-1: configuration #1 chosen from 1 choice scsi3 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 10 usb-storage: waiting for device to settle before scanning usb 2-1: reset full speed USB device using uhci_hcd and address 10 usb 2-1: reset full speed USB device using uhci_hcd and address 10 usb 2-1: reset full speed USB device using uhci_hcd and address 10 usb 2-1: reset full speed USB device using uhci_hcd and address 10 usb-storage: device scan complete Then, nothing happens. Check /dev/sd* shows there are no /dev/sd* device. Check scsi device as root # sg_scan -i (no result, this command quit with no output) Besides, there isn't /proc/bus/usb/devices # ls /proc/bus/usb/ (no result, this command quit with no output) So, what's the next thing to do to find a clue? -- 锐业软服(国内业务) http://www.realss.cn Real SoftService http://www.realss.com 销售咨询(Sales Department): 0086 592 20 99987 (Chinese, German, English) 国际业务(International Sales): 0086 10 8460 6011 (German and English) 联系:厦门大学科技园,嘉庚二号楼6楼 邮政:厦门大学2312号信箱(邮编361005)