I'm trying to write an ISO to CD using K3B on SUSE 10.0 OSS (updated yesterday), and failing. This computer has written CDs with no problems in the past. I've tried three separate downloads (two different ISOs via BitTorrent, and one of the same files by direct download), and all are failing similarly. But not identically - the fails were in different places with the 3 files (although I think they might have been the same the three times I tried the same file - I don't want too many coasters, so have only tried 5 times so far). The error in the K3B log is: ... ... ... Track 01: 603 of 696 MB written (fifo 100%) [buf 99%] 4.1x. Track 01: 604 of 696 MB written (fifo 100%) [buf 95%] 4.2x. /usr/bin/cdrecord: Success. write_g1: scsi sendcmd: no error CDB: 2A 00 00 04 B9 9B 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 63488 cmd finished after 1.697s timeout 40s /usr/bin/cdrecord: A write error occured. /usr/bin/cdrecord: Please properly read the error message above. write track data: error after 634181632 bytes Writing time: 1040.976s Average write speed 4.6x. Min drive buffer fill was 74% Fixating... Fixating time: 65.596s /usr/bin/cdrecord: fifo had 10053 puts and 9990 gets. /usr/bin/cdrecord: fifo was 0 times empty and 9840 times full, min fill was 93%. Can anyone suggest what the problem might be? -- John Pettigrew http://john.pettigrew.org.uk/ http://john.pettigrew.org.uk/blog/