Hi, I need to use my built-in modem sometimes from remote locations. I am running SUSE9.3 on an IBM T42. The hwinfo for the modem is listed below. What do I need to get the modem working? I have tried configuring it with YAST but nothing is happening; it never picks up the line. HWClass=modem Model=IBM 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller Configured=no Available=yes Needed=no Active=unknown Bus=0x4 Slot=0x1f Function=0x6 BaseClass=0x102 SubClass=0x4 VendorID=8086 DeviceID=24c6 SubVendorID=1014 SubDeviceID=0559 RevisionID=0x1 DeviceName=82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller VendorName=Intel Corporation SubVendorName=IBM UnixDevice=/dev/ttySL0 UnixDeviceList=/dev/ttySL0 Drivers=slamr SysfsID=/devices/pci0000:00/0000:00:1f.6 SysfsBusID=0000:00:1f.6 HWClassList=00000820000000 Res.IO=0x2400,0x100,1,3 Res.IO=0x2000,0x80,1,3 Res.Interrupts=11,1150997344,1 -- Bruce Samhaber Senior Hardware Design Consultant Tel: 613-724-5987 112 Kenora St. Fax: 613-724-5987 Ottawa, Ontario Cel: 613-297-6961 K1Y 3L1 mailto: bsamhaber@sympatico.ca http://www3.sympatico.ca/marypat/ -- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com