On Thu, 2006-06-29 at 17:02 -0700, BRUCE STANLEY wrote:
Hi!
I am having a minor problem with the kde screen saver.
After about 7 minutes the monitor will blank out even though I have the monitor power control turned off (contorl center --> peripherals ---> Display.....). I noticed that with this turned off, the kpowersave program is still running. I have tried turning power control on and setting to an hour or so before allowing it to blank the monitor off, but it still does it in about 7 minutes.
This is a home system using an ABIT KT7A-RAID mother board with an ATI 9200 SE vidio card, and an A70F ViewSonic monitor (analog only).
I have played with some of the bois settings, but it does not seem to make andy difference. The manual says that ACPI is always available on this mother board.
How do I get the power control to either be turned off completely on the honor the settings (1hour lets say) that I set up in it?
I was experiencing an almost identical problem with 10.1 which I resolved by going into "KDE desktop configuration -> Display -> Power Management setting" then setting "Enable display power management" to on and setting the 3 options there to disable. It sounds illogical and I don't know why it should work, but it works for me. YMMV. Dave -- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com