Hello, Just installed RC3 and everything is perfect except sound... Amarok plays my files just fine, volume setting is fine, its just nothing is coming out of the speakers (I double checked the connections). Apparently I dont seem to be alone: http://www.suseforums.net/index.php?showtopic=23698 I know the release date for 10.1 has just been set, so is there any package I can update? Warning: I dont know much (if anything) about modules :) Cheers Dirk # hwinfo --sound 11: PCI 1b.0: 0403 Audio device [Created at pci.300] UDI: /org/freedesktop/Hal/devices/pci_8086_27d8 Unique ID: u1Nb.xi1knrbRPRF SysFS ID: /devices/pci0000:00/0000:00:1b.0 SysFS BusID: 0000:00:1b.0 Hardware Class: sound Model: "Dell 82801G (ICH7 Family) High Definition Audio Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27d8 " High Definition Audio Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01d1 Revision: 0x01 Driver: "HDA Intel" Memory Range: 0xfebfc000-0xfebfffff (rw,non-prefetchable) IRQ: 169 (28531 events) Module Alias: "pci:v00008086d000027D8sv00001028sd000001D1bc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=yes, avail=yes, need=no, active=unknown # hwinfo --cpu 01: None 00.0: 10103 CPU [Created at cpu.290] Unique ID: rdCR.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 15.4.4 "Intel(R) Pentium(R) D CPU 2.80GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,syscall,nx,lm,constant_tsc,pni,monitor,ds_cpl,cid,cx16,xtpr Clock: 2793 MHz Cache: 1024 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 02: None 01.0: 10103 CPU [Created at cpu.290] Unique ID: wkFv.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 15.4.4 "Intel(R) Pentium(R) D CPU 2.80GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,syscall,nx,lm,constant_tsc,pni,monitor,ds_cpl,cid,cx16,xtpr Clock: 2793 MHz Cache: 1024 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown -- Dirk Gorissen PhD Student COMS Research Group Antwerp University Belgium http://www.coms.ua.ac.be