Re: [SLE] Another dialin server question

From: "Michael W Cocke" Since SuSE 10 cannot properly suspend to disk on a T22 (this would be a lot easier if it did!), I have to go to windows on the dialin machine - does anyone know the setup for pppd to answer/connect & authenticate from an XP caller?

I copied and saved this from somewhere. I have a Suse 9 box that I use for dialin access from XP. This should work. 1. Install Mgetty 2. Edit the /etc/inittab and add these txt below all the txt S0:2345:respawn:/sbin/mgetty -s 57600 /dev/ttyS0 # the modem was using COM1 3. Edit your /etc/mgetty+sendfax/mgetty.config ... add the txt below, this is what i am using speed 57600 modem-type auto modem-check-time 1800 init-chat "" AT&F1M0 # this is what ie used with my Modem, it could be different #with other modem port ttyS0 debug 4 4. edit the /etc/mgetty+sendfax/login.config #---- Ive just commented out the default below /AutoPPP/ - a_ppp /usr/sbin/pppd auth -chap +pap login debug 5. Assuming PPP has been installed already, below are my ppp configs /etc/ppp/options asyncmap 0 crtscts nodetach deflate 15 debug lock login #note: i put log-in here so i can use the systems users modem netmask 255.255.255.0 ms-dns 2xx.xx.xxx.xx ms-dns 2xx.xx.xxx.x require-pap refuse-chap ~ /etc/ppp/pap-secrets # Secrets for authentication using PAP # client server secret IP addresses * * "" * ############################################################### /etc/ppp/options.ttyS0 172.16.0.101:17.16.0.100 #note: 172.16.0.101 - server assigned IP # 172.16.0.100 - remote IP 6. make sure u have enabled this in your firewall script echo "1" > /proc/sys/net/ipv4/ip_forward $IPTABLES -t nat -A POSTROUTING -o eth0 -j MASQUERADE note: eth0 - connected to INTERNET - ip is 2xx.xxx.xxx.xxx eth1 - connected to LAN ppp0 - the dial-in ppp adapter -- David C. Rankin, J.D., P.E. RANKIN LAW FIRM, PLLC 510 Ochiltree Street Nacogdoches, Texas 75961 (936) 715-9333 (936) 715-9339 fax www.rankinlawfirm.com --