Hi everyone. Any ideas how I can sort out a GRUB problem? I have just loaded up SuSE 10 on a PC. However, after installation and reboot (in readiness for passwords to entered etc) I get Error 18. Now, I understand this to be to do with limits being exceeded on the hard drive. I thought this was only supposed to happen with drives of about 8gb on older PC's? This is an oldish PC but not that old. It is running a Pentium 3 of around 800 or 900mhz with 128mb of RAM (this is to be increased to around 750mb) The hard drive is a lowly 6.4gb You can also get this error with an old BIOS, if you try to boot beyond 1024 cylinders. Make a small /boot partition fully within the first 1024 cylinders, or shrink the root partition so it is no larger than that, and the problem should disappear. Where you are now in the installation
On 20/02/06 16:35, Kevanf1 wrote: process, it might be simplest just to reinstall with the above in mind.